Data sheet OMNIMATE Signal - series B2L/S2L 3.50 - 2-row S2L 3.50/32/90G 3.5SN OR BX Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Product image Similar to illustration Angled, two-tier pin header available as closed-sided or with flange (open-sided pin headers on request). Pin headers with 3.5mm pins are designed for wave soldering and are packaged in a box. They can be screwed on to the PCB. The pin headers provide space for labelling and can be coded. General ordering data Type Order No. Version GTIN (EAN) Qty. Product data Packaging S2L 3.50/32/90G 3.5SN OR BX 1727960000 PCB plug-in connector, male header, closed side, THT solder connection, 3.50 mm, No. of poles: 32, 90, Solder pin length (l): 3.5 mm, tinned, Orange, Box 4032248039456 30 pc(s). IEC: 250 V / 10 A UL: 150 V / 10 A Box Creation date January 16, 2019 6:26:44 PM CET Catalogue status 04.01.2019 / We reserve the right to make technical changes. 1 Data sheet OMNIMATE Signal - series B2L/S2L 3.50 - 2-row S2L 3.50/32/90G 3.5SN OR BX Technical data Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Dimensions and weights Width Height Height of lowest version Depth (inches) 57.4 mm 14 mm 10.5 mm 0.559 inch Width (inches) Height (inches) Depth Net weight 2.26 inch 0.551 inch 14.2 mm 5.97 g System specifications Product family OMNIMATE Signal - series B2L/S2L 3.50 - 2-row Mounting onto the PCB THT solder connection Pitch in inches (P) 0.138 inch No. of poles 32 Solder pin length (l) 3.5 mm Solder pin dimensions d = 1.0 mm, Octagonal Solder eyelet hole diameter tolerance (D)+ 0,1 mm L1 in inches 2.067 inch Pin series quantity 2 Touch-safe protection acc. to DIN VDE 0470 IP 10 Plugging cycles 25 Pulling force/pole, max. 4N Type of connection Pitch in mm (P) Outgoing elbow Number of solder pins per pole Tolerance of solder pin position Solder eyelet hole diameter (D) L1 in mm Number of rows Touch-safe protection acc. to DIN VDE 57 106 Can be coded Plugging force/pole, max. Board connection 3.5 mm 90 1 0.20 mm 1.3 mm 52.5 mm 1 Safe from back-of-hand touch Yes 5N Material data Insulating material Colour chart (similar) CTI UL 94 flammability rating Contact surface Storage temperature, min. Max. relative humidity during storage Operating temperature, max. Temperature range, installation, max. PBT RAL 2000 200 V-0 tinned -25 C 80 % 100 C 100 C Colour Insulating material group Insulation resistance Contact material Layer structure of solder connection Storage temperature, max. Operating temperature, min. Temperature range, installation, min. Orange IIIa 108 Copper alloy 2-3 m Ni / 5-7 m Sn glossy 55 C -50 C -30 C Rated data acc. to IEC tested acc. to standard Rated current, max. no. of poles (Tu=20C) Rated current, max. no. of poles (Tu=40C) Rated voltage for surge voltage class / pollution degree III/2 Rated impulse voltage for surge voltage class/ pollution degree II/2 Rated impulse voltage for surge voltage class/ contamination degree III/3 IEC 60664-1, IEC 61984 10 A 8.5 A 125 V 2.5 kV 2.5 kV Rated current, min. no. of poles (Tu=20C) Rated current, min. no. of poles (Tu=40C) Rated voltage for surge voltage class / pollution degree II/2 Rated voltage for surge voltage class / pollution degree III/3 Rated impulse voltage for surge voltage class/ pollution degree III/2 Short-time withstand current resistance 10 A 9A 250 V 80 V 2.5 kV 3 x 1s with 77 A Creation date January 16, 2019 6:26:44 PM CET Catalogue status 04.01.2019 / We reserve the right to make technical changes. 2 Data sheet OMNIMATE Signal - series B2L/S2L 3.50 - 2-row S2L 3.50/32/90G 3.5SN OR BX Technical data Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Rated data acc. to CSA Institute (CSA) Rated voltage (Use group B / CSA) Reference to approval values Certificate No. (CSA) 150 V Specifications are maximum values, details see approval certificate. Rated current (Use group B / CSA) 200039-1488444 5A Rated data acc. to UL 1059 Institute (UR) Certificate No. (UR) Rated voltage (Use group B / UL 1059) 150 V Rated current (Use group B / UL 1059) 10 A Reference to approval values Specifications are maximum values, details see approval certificate. E60693 Rated voltage (Use group C / UL 1059) 50 V Rated current (Use group C / UL 1059) 10 A Packaging Packaging VPE width Box 70 mm VPE length VPE height 55 mm 105 mm EC002637 EC002637 27-26-07-01 27-44-04-02 27-44-04-02 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1 EC002637 30-21-18-10 27-26-07-04 27-44-04-02 27-44-04-02 Classifications ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0 Notes Notes * Additional colours on request * Gold-plated contact surfaces on request * Spacing between rows: see hole layout * Rated current related to rated cross-section & min. No. of poles. * P on drawing = pitch IPC conformity * Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. Creation date January 16, 2019 6:26:44 PM CET Catalogue status 04.01.2019 / We reserve the right to make technical changes. 3 Data sheet OMNIMATE Signal - series B2L/S2L 3.50 - 2-row S2L 3.50/32/90G 3.5SN OR BX Technical data Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Approvals Approvals ROHS Conform Downloads Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data Declaration of the Manufacturer FL DRIVES EN MB DEVICE MANUF. EN FL DRIVES DE CAT 2 PORTFOLIOGUIDE EN FL BUILDING SAFETY EN FL APPL LED LIGHTING EN FL INDUSTR.CONTROLS EN FL MACHINE SAFETY EN FL HEATING ELECTR EN FL APPL_INVERTER EN FL_BASE_STATION_EN FL ELEVATOR EN FL POWER SUPPLY EN FL 72H SAMPLE SER EN PO OMNIMATE EN EPLAN, WSCAD S2L-SMT.zip STEP Creation date January 16, 2019 6:26:44 PM CET Catalogue status 04.01.2019 / We reserve the right to make technical changes. 4 Data sheet OMNIMATE Signal - series B2L/S2L 3.50 - 2-row S2L 3.50/32/90G 3.5SN OR BX Drawings Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Dimensional drawing Creation date January 16, 2019 6:26:44 PM CET Catalogue status 04.01.2019 / We reserve the right to make technical changes. 5 Wave Solder Profile Recommended wave solderding profiles Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Single Wave: 260 Contact time appr. 3 sec. 260 C 255 C 250 C 240 220 200 Temperature [C] 180 160 140 appr. 150 C Preheating 120 100 Cooling rate < 6 K/s 80 60 Typical process Prozess limits Temperature on board 40 Heating rate < 3 K/s 20 0 0 20 40 60 80 100 120 time [s] 140 160 180 200 220 240 Double Wave: 255 C Total contact time max. 10 sec. 260 240 260 C 250 C 220 200 Temperature [C] 180 160 140 appr. 150C Preheating 120 100 Cooling rate < 6 K/s 80 60 Typical process Process limits Temperature on board 40 Heating rate < 3 K/s 20 0 0 20 40 60 Wave soldering profiles 80 100 120 time [s] 140 160 180 200 220 240 Wired connection elements should be processed in accordance with the DIN EN 61760-1 standard. We have included two recommendations for practical wave soldering profiles, with which Weidmuller PCB terminals and connectors are qualified. When choosing a suitable profile for your application, the following factors also need to be considered: - PCB thickness - Proportion of Cu in the layers - Single/double-sided assembly - Product range - Heating and cooling rates The single and double wave profiles each indicate the recommended operating range, including the maximum soldering temperature of 260C. In practice, the maximum soldering temperature is quite often well below the above maximum profile. We reserve the right to make technical changes.