CPH6531 Ordering number : ENA0521A SANYO Semiconductors DATA SHEET CPH6531 PNP Epitaxial Planar Silicon Transistor DC / DC Converter Applications Applications * Relay drivers, lamp drivers, motor drivers, flash Features * * * Composite type with two PNP transistors contained in one package facilitating high-density mounting The two chips contained are equivalent to the CPH3116 Ultrasmall package permitting applied sets to be small and slim Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Collector-to-Base Voltage Conditions Ratings Unit VCBO VCES -50 V -50 V VCEO VEBO -50 V -5 V -1.0 A Collector Current (Pulse) IC ICP Base Current IB -200 mA Collector Dissipation When mounted on ceramic substrate (600mm2x0.8mm) 1unit 0.9 W When mounted on ceramic substrate (600mm2x0.8mm) 1.1 W Junction Temperature PC PT Tj 150 C Storage Temperature Tstg -55 to +150 C Collector-to-Emitter Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Total Power Dissipation -2 Package Dimensions Product & Package Information unit : mm (typ) 7018A-006 * Package : CPH6 * JEITA, JEDEC : SC-74, SOT-26, SOT-457 * Minimum Packing Quantity : 3,000 pcs./reel 4 Packing Type: TL Marking 0.9 1 2 0.95 LOT No. ES 0.05 1.6 0.2 0.6 2.8 0.2 0.6 5 CPH6531-TL-E 0.15 2.9 6 A TL 3 0.4 1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1 Electrical Connection 6 5 4 1 2 3 SANYO : CPH6 http://semicon.sanyo.com/en/network 62012 TKIM/11007EA TIIM TC-00000426 No. A0521-1/6 CPH6531 Electrical Characteristics at Ta=25C Parameter Symbol Collector Cutoff Current ICBO IEBO hFE Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-On Time Storage Time Fall Time min typ VCE= -2V, IC= -100mA VCE= -10V, IC= -300mA VCE(sat)1 VCB= -10V, f=1MHz IC= -500mA, IB= -10mA VCE(sat)2 VBE(sat) V(BR)CBO Unit max VCB= -40V, IE=0A VEB= -4V, IC=0A fT Cob Output Capacitance Ratings Conditions 200 -0.1 A -0.1 A 560 420 MHz 9 pF -230 -380 mV IC= -300mA, IB= -6mA -125 -200 mV IC= -500mA, IB= -10mA -0.81 -1.2 V IC= -10A, IE=0A -50 V V(BR)CES V(BR)CEO IC= -100A, RBE=0 -50 V IC= -1mA, RBE= -50 V V(BR)EBO ton IE= -10A, IC=0A -5 tstg tf See specified Test Circuit. V 35 ns 170 ns 30 ns Switching Time Test Circuit IB1 PW=20s D.C.1% IC VOUT IB2 VIN RB VR 50 RL + + 100F 470F VBE=5V VCC= --25V 20IB1= --20IB2=IC= --500mA Ordering Information Package Shipping memo CPH6 3,000pcs./reel Pb Free IC -- VCE A VCE= --2V A --0.7 A --10m A m --8 --6mA --0.6 --4mA --0.5 --2mA --0.4 --0.3 --0.2 --0.9 --0.8 --0.7 --0.6 --0.5 --0.4 --0.3 Ta=7 5C mA --20m 0 --3 --0.8 Collector Current, IC -- A IC -- VBE --1.0 Collector Current, IC -- A 0m --0.9 --4 --50 mA --1.0 --0.2 --0.1 --0.1 IB=0mA 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Collector-to-Emitter Voltage, VCE -- V --0.9 --1.0 IT11440 25C --25C Device CPH6531-TL-E 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Base-to-Emitter Voltage, VBE -- V --0.9 --1.0 IT11415 No. A0521-2/6 CPH6531 hFE -- IC 1000 DC Current Gain, hFE Ta=75C 3 2 --25C 25C 100 7 5 3 2 10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A 2 1000 7 5 3 2 100 7 5 3 2 --0.01 3 2 3 5 7 --0.1 2 3 5 7 --1.0 3 IT01649 VCE(sat) -- IC 5 f=1MHz IC / IB=20 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 7 5 Output Capacitance, Cob -- pF 2 Collector Current, IC -- A IT01647 Cob -- VCB 100 VCE= --10V 3 Gain-Bandwidth Product, f T -- MHz 7 5 f T -- IC 5 VCE= --2V 3 2 10 7 5 3 2 --0.1 7 5C 5 7 Ta= 3 --25 C C 25 2 3 2 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 5 7 --100 IT01651 Collector-to-Base Voltage, VCB -- V 3 5 7 2 --0.1 3 5 IC / IB=50 IC / IB=50 7 5 3 2 --0.1 C =75 Ta 7 C 25 C --25 5 7 --1.0 IT11417 VBE(sat) -- IC --10 Base-to-Emitter Saturation Voltage, VBE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 2 Collector Current, IC -- A VCE(sat) -- IC --1.0 7 --0.01 --0.01 5 3 2 --1.0 Ta= --25C 7 75C 5 25C 3 2 3 2 --0.01 2 3 5 7 3 2 --0.1 5 --1.0 IT11419 Collector Current, IC -- A ICP= --2A 1m s DC 10 0m s er 2 ms op 10 3 ati on --0.1 7 5 3 2 Ta=25C Single pulse Mounted on a ceramic board (600mm20.8mm) --0.01 --0.1 2 3 5 7 2 --0.1 3 5 7 --1.0 IT01657 Mounted on a ceramic board (600mm20.8mm) 1.2 IC= --1A Collector Dissipation, PC -- W --1.0 7 5 3 PC -- Ta 1.4 s 100 0s 50 Collector Current, IC -- A 2 2 Collector Current, IC -- A ASO 5 3 --0.1 --0.01 7 5 7 --1.0 2 3 5 7 --10 2 Collector-to-Emitter Voltage, VCE -- V 1.1 1.0 0.9 To ta 0.8 ld 1u nit 0.6 iss ipa tio n 0.4 0.2 0 3 5 7 IT11541 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 140 160 IT10764 No. A0521-3/6 CPH6531 Embossed Taping Specification CPH6531-TL-E No. A0521-4/6 CPH6531 Outline Drawing CPH6531-TL-E Land Pattern Example Mass (g) Unit 0.015 mm * For reference Unit: mm 2.4 1.4 0.6 0.95 0.95 No. A0521-5/6 CPH6531 Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of June, 2012. Specifications and information herein are subject to change without notice. PS No. A0521-6/6