ATC 800 E Series
NPO Ceramic
High RF Power Multilayer
Capacitors
• Case E Size • Capacitance Range: 1 pF to 330 pF
(.380" x .380") and 2700 pF to 5100 pF
• High Q • Ultra-Stable Performance
• Ultra Low ESR • High RF Current/Voltage
• High RF Power • High Reliability
• 7200 WVDC • RoHS Compliant, Pb free
ATC’s 800 E Series offers superb performance in demanding high RF
power applications requiring consistent and reliable operation. The
combination of highly conductive metal electrode systems, optimized case
geometries, and proprietary dielectrics, yields the lowest ESR. ATC’s new
NPO low loss rugged dielectrics are designed to provide superior heat
transfer in high RF power applications. Ultra-low ESR and superior thermal
performance insure that the 800 E Series products are your best choice for
high RF power applications from VHF through microwave frequencies.
Typical functional applications: Bypass, Coupling, Tuning, Impedance
Matching and DC Blocking
Typical circuit applications: HF/RF Power Amplifiers, Transmitters, Antenna
Tuning, Plasma Chambers and Medical (MRI coils).
ENVIRONMENTAL TESTS
ATC 800 E Series Capacitors are designed and manufactured to
meet and exceed the requirements of EIA-198, MIL-PRF-55681 and
MIL-PRF-123.
THERMAL SHOCK:
MIL-STD-202, Method 107, Condition A
MOISTURE RESISTANCE:
MIL-STD-202, Method 106
LOW VOLTAGE HUMIDITY:
MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied while
subjected to an environment of 85°C with 85% relative humidity for 240
hours min.
LIFE TEST:
MIL-STD-202, Method 108, for 2000 hours, at 125°C.
Voltage applied.
120% of WVDC for capacitors rated at 1250 volts DC or less.
100% of WVDC for capacitors rated above 1250 volts DC
ELECTRICAL AND MECHANICAL
SPECIFICATIONS
QUALITY FACTOR (Q):
Greater than 5,000 (1 pF to 1000 pF) @ 1 MHz.
Greater than 5,000 (1100 pF to 5100 pF) @ 1 KHz.
TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC):
0 ±30 PPM/°C (-55°C to +125°C)
INSULATION RESISTANCE (IR):
105 Megohms min. @ +25°C at rated WVDC
104 Megohms min. @ +125°C at rated WVDC
WORKING VOLTAGE (WVDC):
See Capacitance Values Table, page 2
DIELECTRIC WITHSTANDING VOLTAGE (DWV):
150% of WVDC for capacitors rated above 500 volts DC and ≤1250 volts
DC for 5 seconds.
120% of WVDC for capacitors rated above 1250 volts DC for 5 seconds..
RETRACE: Less than ±(0.02% or 0.02 pF), whichever is greater
AGING EFFECTS: None
PIEZOELECTRIC EFFECTS: None
(No capacitance variation with voltage or pressure)
CAPACITANCE DRIFT: ±(0.02% or 0.02 pF), whichever is greater
OPERATING TEMPERATURE RANGE:
From -55°C to +125°C
TERMINATION STYLE:
See Mechanical Configurations, page 3
TERMINAL STRENGTH: Terminations for chips withstand a pull of 10 lbs.
min., 25 lbs. typical, for 5 seconds in direction perpendicular to the
termination surface of the capacitor. Test per MIL-STD-202, method 211.
ATC # 001-1077 Rev. E, 2/11
ISO 9001
REGISTERED
COMPANY
2
ATC PART NUMBER CODE
ATC800 E 22 0 J TN 7200 X C
Series
Case Size
Capacitance Code:
First 2 significant digits for capacitance.
R=Decimal Point
Indicates number of zeros following digits Laser Marking
of capacitance in picofarads except for decimal values.
Capacitance Tolerance
WVDC
Termination Code
Packaging
C - ATC Matrix Tray (Standard)
ATC 800 E Capacitance Values
The above part number refers to a 800 E Series (case size E) 22 pF capacitor,
J tolerance (±5%), 7200 WVDC, with TN termination (Tin Plated over Non-Magnetic Barrier Termination), laser marking and plastic Matrix Tray packaging.
For additional information and catalogs contact your ATC
representative or call direct at (631) 622-4700.
Consult factory for additional performance data.
ATC accepts orders for our parts using designations with or without the
“ATC” prefix. Both methods of defining the part number are equivalent, i.e.,
part numbers referenced with the “ATC” prefix are interchangeable to parts
referenced without the “ATC” prefix. Customers are free to use either in
specifying or procuring parts from American Technical Ceramics.
AMERICAN TECHNICAL CERAMICS
ATC North America ATC Europe ATC Asia
631-622-4700 • sales@atceramics.com +46 8 6830410 • sales@atceramics-europe.com 86-755-2396-8759 • sales@atceramics-asia.com
www.atceramics.com
CAPACITANCE TOLERANCE
Code B C D F G JK
Tol. ±0.1 pF ±0.25 pF ±0.5 pF ±1% ±2% ±5% ±10%
CAP.
CODE
CAP.
(pF) TOL RATED WVDC CAP.
CODE
CAP.
(pF) TOL. RATED WVDC CAP.
CODE
CAP.
(pF) TOL. RATED WVDC
1R0 1.0
B, C, D 7200
6R8 6.8
B, C, D
7200
3600
680 68
F, G, J, K
G, J , K
3600
2500
1000
1R1
1.1 7R5 7.5 750 75
1R2
1.2 8R2 8.2 820 82
1R3
1.3 9R1 9.1 910 91
1R4
1.4 100 10 101 100
1R5
1.5 110 11 111 110
1R6
1.6 120 12 121 120
1R7
1.7 130 13 131 130
1R8
1.8 150 15 151 150
1R9
1.9 160 16 161 160
2R0
2.0 180 18 181 180
2R1
2.1 200 20 201 200
2R2
2.2 220 22
F, G, J, K
221 220
2R4
2.4 240 24 241 240
2R7
2.7 270 27 271 270
3R0
3.0 300 30 301 300
3R3 3.3 330 33 331 330
3R6 3.6 360 36
3R9
3.9 390 39 272 2700
4R3 4.3 430 43 302 3000
4R7 4.7 470 47 332 3300
5R1 5.1 510 51 392 3900
5R6 5.6 560 56 472 4700
6R2 6.2 620 62 512 5100
3
AMERICAN TECHNICAL CERAMICS
ATC North America ATC Europe ATC Asia
631-622-4700 • sales@atceramics.com +46 8 6830410 • sales@atceramics-europe.com 86-755-2396-8759 • sales@atceramics-asia.com
www.atceramics.com
ATC 800 E Non-Magnetic Capacitors: Mechanical Configurations
Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant.
ATC 800 E Capacitors: Mechanical Configurations
ATC
SERIES
& CASE
SIZE
ATC
TERM.
CODE
CASE SIZE
& TYPECASE SIZE
& TYPE
OUTLINES
W/T IS A
TERMINATION SURFACE
BODY DIMENSIONS
INCHES (mm) LEAD AND TERMINATION
DIMENSIONS AND MATERIALS
LENGTH
(L)
WIDTH
(W)
THICKNESS
(T)
OVERLAP
(Y) MATERIALS
800 E TE
Solderable Nickel
Barrier
L T
W
Y
.380
+.015 -.010
(9.65
+0.38
-0.25)
.380
+.015 -.010
(9.65
+0.38 -0.25)
.190 (4.83)
max.
.040 (1.02)
max.
RoHS Compliant
Tin Plated over
Nickel Barrier Termination
800 E MS
E
Microstrip
L T
LL
WL
TL
W
.380
+.035 -.010
(9.65
+0.89
-0.25)
N/A.
High Purity
Silver Leads
LL = .750 (19.05) min.
WL = .350 ±.010
(8.89 ±0.25)
TL = .010 ±.005
(0.25 ±0.13)
Leads are Attached with
High Temperature Solder
800 E AR
E
Axial Ribbon
ATC
SERIES
& CASE
SIZE
ATC
TERM.
CODE
CASE SIZE
& TYPE
OUTLINES
W/T IS A
TERMINATION SURFACE
BODY DIMENSIONS
INCHES (mm) LEAD AND TERMINATION
DIMENSIONS AND MATERIALS
LENGTH
(L)
WIDTH
(W)
THICKNESS
(T)
OVERLAP
(Y) MATERIALS
800 E TN E
Non-Mag
Solderable Barrier
L T
W
Y
.380
+.015 -.010
(9.65
+0.38
-0.25)
.380
+.015 -.010
(9.65
+0.38 -0.25)
.190 (4.83)
max.
.040 (1.02)
max.
RoHS Compliant
Tin Plated over
Non-Magnetic
Barrier Termination
800 E MN
E
Non-Mag Microstrip
L T
LL
WL
TL
W
.380
+.035 -.010
(9.65
+0.89
-0.25)
N/A.
High Purity
Silver Leads
LL = .750 (19.05) min.
WL = .350 ±.010
(8.89 ±0.25)
TL = .010 ±.005
(0.25 ±0.13)
Leads are Attached with
High Temperature Solder.
800 E AN
E
Non-Mag
Axial Ribbon
L T
LL
WL
TL
W
L T
LL
WL
TL
W
800 E ESR vs. Frequency
Frequency (MHz)
ESR (MilliOhms)
1
10
100
1 10 100 1000
10 pF
12 pF
39 pF
47 pF
220 pF
330 pF
5100 pF
4
AMERICAN TECHNICAL CERAMICS
ATC North America ATC Europe ATC Asia
631-622-4700 • sales@atceramics.com +46 8 6830410 • sales@atceramics-europe.com 86-755-2396-8759 • sales@atceramics-asia.com
www.atceramics.com
/PSNBM
)JHI%FOTJUZ





 

".JO #.JO $.JO %.JO
1BE4J[F
/PSNBM
)JHI%FOTJUZ





 

7FSUJDBM.PVOU
)PSJ[POUBM.PVOU
$BTF&
7FSUJDBM
&MFDUSPEF0SJFOUBUJPO
)PSJ[POUBM
&MFDUSPEF0SJFOUBUJPO
#
"$
%
#
220J
220J
8
5
8
-
-
5
&
ATC 800 E Capacitors: Suggested Mounting Pad Dimensions
Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document
#001-992 Rev. B; 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.
com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale.
ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements
of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice.
© 2010 American Technical Ceramics Corp. All Rights Reserved ATC # 001-1077 Rev. E, 2/11