TGH Series 120 and 200 Watt SOT227Package Thick Film Power Due to their non-inductive design, these resistors are ideally suited for high-frequency and pulse-load applications. Available in 120- or 200-watt sizes, this resistor is designed for direct mounting onto a heatsink. Popular applications include variable speed drives, power supplies, control devices, telecom, robotics, motor controls, and other switching designs. characteristics Contacts Nickel-plated copper Derating Substrate Al203 (96%) Terminal Nuts American standard 303 stainless steel Resistance Range 0.1 to 1M Tolerance 5%; other tolerances available on request Percent Rated Power Molding Compound High-performance epoxy, compliant to UL94-V0 Temperature coefficient: 250ppm (at +105C ref. to +25C) Max. Working Voltage 500V (1000V, not to exceed rated wattage using P*R.) Power Rating at 85C 120W (see derating) Partial Discharge up to 2,000Vrms/80 pC Voltage Proof Dielectric Strength up to 4,000V DC against ground Heat Resistance to Cooling Plate Rth <0.35 K/W Type: H L 120 200 100 80 96 160 60 72 120 40 48 80 20 24 40 0 0 25 50 85 100 125 150 175 Bottom of base plate Temperature, C 0 0 Rated Power, W Heat Sink Nickel-plated copper Best results can be reached by using a thermal transfer compound with a heat conductivity of better than 1W/mK Configurations (per package) Config. 1 Capacitance/Mass 45pF Working Temp. Range -55C to +155C 1 Config. 2 2 4 1 Max. Torque for Base Plate (static) 1.5 Nm Max. Torque for Contacts (static) 1.3 Nm. M4 screws (not included) Derating (thermal resistance) 2.86W/K (0.35K/W) P e r f o r m a n c e D ata Test Method Moisture Resistance MIL-Std-202, Method 106 Thermal shock Mil-Std-202, Method 107, Cond F R (0.5% + 0.001W) max (0.3% + 0.01W) max Terminal Strength MIL-Std-202, Method 211, Cond A (pull test) 2.4N (0.2% = 0.01W) max Vibration, High Frequency MIL-Std-202, Method 204, Cond D (0.2% + 0.01W) max Life 20 years (120,000 hours) Operating failure rate of 8.3 x 10-7 fail/hour. Requirements to be achieved under the following conditions: Tamb=25C, THS=70C, Papplied=Pn (continued) 154 1-866-9-OHMITE * Int'l 1-847-258-0300 * Fax 1-847-574-7522 * www.ohmite.com * info@ohmite.com TGH Series 120 and 200 Watt SOT227 Package Thick Film Power dimensions (iin./mm) 1.501" 0.005 (38.1mm 0.13) 1.235" Ref. (31.35mm) 3 4 0.473" 0.010 (12.0mm 0.26) 0.079" 0.002 (2.00mm 0.05) 0.032" 0.002 (0.80mm 0.05) 0.165" 0.005 (4.2mm 0.13) 0.500" 0.010 (12.7mm 0.26) 0.980" 0.021 (24.9mm 0.5) 1 2 M4 0.591" 0.005 (15.0mm 0.13) 0.209" (5.3mm) max. 1.190" 0.010 (30.2mm 0.26) o r d e r i n g i n f o r m at i o n Standard Part Numbers Configuration V = config. 1 Special Option X = config. 2 A = 1KV E = RoHS compliant TGHLVA25R0JE SOT 227 Series Wattage Resistance Value H = 120W Example: L = 200W R500 = 0.500 1R00 = 1 250R = 250 1K00 = 1,000 10K0 = 10,000 Tolerance J = 5% Ohms 120 Watt TGHH 200 Watt TGHL 0.1 TGHHVR100JE 0.5 1 TGHHV1R00JE 5 TGHHV5R00JE 10 TGHHV10R0JE TGHLVR100JE TGHLVR500JE TGHLV1R00JE 25 33 TGHHV33R0JE 50 TGHHV50R0JE 100 TGHHV100RJE 150 TGHHV150RJE 500 680 1K 5K 10K TGHHV500RJE TGHHV680RJE TGHHV1K00JE TGHHV5K00JE TGHHV10K0JE TGHLV10R0JE TGHLV25R0JE TGHLV33R0JE TGHLV100RJE TGHLV150RJE TGHLV500RJE TGHLV680RJE TGHLV1K00JE TGHLV5K00JE TGHLV10K0JE THIS PRODUCT IS DESIGNED FOR USE WITH PROPER HEATSINKING. Maximum base plate temperature of the resistor must be monitored and kept within specified limits to establish the power rating. Best technique is to attach a thermocouple to the side of the base plate of the resistor. Temperature of plastic housing or heat sink cannot be used to establish rating of the resistor. 1-866-9-OHMITE * Int'l 1-847-258-0300 * Fax 1-847-574-7522 * www.ohmite.com * info@ohmite.com 155 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Ohmite: TGHLVR500JE TGHHV100RJE TGHHV10K0JE TGHHV10R0JE TGHHV150RJE TGHHV1K00JE TGHHV1R00JE TGHHV33R0JE TGHHV500RJE TGHHV50R0JE TGHHV5K00JE TGHHV5R00JE TGHHV680RJE TGHHVR100JE TGHLV100RJE TGHLV10K0JE TGHLV10R0JE TGHLV150RJE TGHLV1K00JE TGHLV1R00JE TGHLV25R0JE TGHLV33R0JE TGHLV500RJE TGHLV5K00JE TGHLV680RJE TGHLVR100JE TGHLV50RJE