Q SERIES O16mm (.630") Panel Mount LED Indicators Distinctive features and specification Q16_VOY1603R1US Features * 16mm panel mounting LED indicator * 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs * Plated brass bezel finished in bright chrome, black chrome or satin grey and moulded polycarbonate rear body * Secret until lit polycarbonate decals or custom engraving * Prominent recessed and flush bezel styles * 2VDC - 220VAC * (2.8 x 0.8) solder lug/faston terminals, pins or (200mm long) wire terminations * IP67 sealing option (EN60529) * Supplied with fixing nut and spring washer NB: UL Recognized Component TECHNICAL SPECIFICATIONS Voltage 02 (No Resistor) 6VDC 12VDC 24VDC 28VDC 110VAC 220VAC Operating Voltage (Min to Max) 1.8 to 3.3VDC 5.4 to 6.6VDC 10.8 to 13.2VDC 21.6 to 26.4VDC 25.2 to 30.8VDC 99 to 121VAC 207 to 253VAC Operating Current (Typical All Types) 20mA max* 20mA 20mA 20mA 20mA 6mA 3mA Max Reverse Voltage: 5V Viewing Angle: 30-100 (dependant on model) Life Expectancy: 100,000 hours Temperature Range: -40 to +85C (operating & storage) Torque: 75cNm O 16.00 +0.15/-0.0 19,00 0,748 AF 2,40 0,094 PANEL CUTOUT M16 x 1,0 THREAD Standard LED Intensity Prominent and Recessed Flush Forward Voltage HE Red 80mcd 10mcd 2.0V Green 60mcd 5mcd 2.2V Yellow 50mcd 4mcd 2.1V Blue 540mcd 100mcd 3.3V White 1000mcd 150mcd 3.3V Orange 80mcd 200mcd 2.0V Bi-color (Typical) (Red/Green) 15/15mcd 10/10mcd 2.0V/2.2V Tri-color (Typical) (Red/Green/Yellow) 60/50/50mcd 15/30/30mcd 2.0V/2.2V/2.1V Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. Super Bright LED HE Red Green Yellow Blue White Orange Prominent and Recessed 17,000mcd 11,000mcd 4,000mcd 2,500mcd 4,400mcd 2,800mcd Flush 2000mcd 680mcd 350mcd 250mcd 250mcd 300mcd Forward Voltage 2.2V 3.5V 2.3V 3.3V 3.3V 2.1V Hyper Bright LED HE Red Green Yellow Orange Prominent and Recessed 2,800mcd 2,200mcd 1,300mcd 850mcd Flush 800mcd 250mcd 250mcd 200mcd Forward Voltage 2.1V 3.2V 2.0V 2.1V Luminous intensity will be reduced with lower operating current. Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy. The company reserves the right to change specifications without notice. * Customer to supply resistor for desired operating current. Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated. Luminous intensities and color shades of white LEDs may vary within a batch. LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal. APEM www.apem.com 1 Q SERIES O16mm (.630") Panel Mount LED Indicators Technical Drawings PROMINENT BEZEL PINS M16x1,0 M16x1,0 18,30 0,720 18,30 0,720 2,8x0,8[0,11x0,031] 0,50 0,020 1,25 0,049 1,25 0,049 SOLDER LUG/FASTONS 4,75 0,187 13,50 0,531 10,00 0,394 9,35 0,368 33,75 1,329 4,75 0,187 13,50 0,531 7,00 0,276 5,50 ,217 28,75 1,132 REAR EPOXY PINS WIRES 0,50 0,020 1,25 0,049 1,25 0,049 M16x1,0 18,30 0,720 18,30 0,720 M16x1,0 4,75 0,187 13,50 0,531 200,0+/-10 [7,874+/-0,393] SHORT BODY PINS M16x1,0 200,0+/-10 [7,874+/-0,393] 4,75 0,187 13,50 0,531 19,75 0,778 FLUSH BEZEL 16,00 0,630 14,50 0,571 200,0+/-10 [7,874+/-0,393] 4,75 0,187 13,50 0,531 19,75 19,750 SOLDER LUG/FASTONS 2,8x0,8[0,11x0,031] M16x1,0 2,00 0,079 13,50[0,531] 10,00 0,394 9,35 0,368 33,60 1,323 2,00 0,079 13,50[0,531] 7,00 0,276 5,50 0,217 28,60 1,126 REAR EPOXY PINS 18,30 0,720 18,30 0,720 M16x1,0 2,00 0,079 13,50[0531] 200,0+/-10 [7,874+/-0,393] 28,60 1,126 18,25 0,719 16,75 0,659 SHORT BODY WIRES 18,30 0,720 M16x1,0 18,30 0,720 18,30 0,720 M16x1,0 2 2,00 0,079 13,50[0,531] 17,35 0,683 SHORT BODY PINS M16x1,0 0,50 0,020 1,25 0,049 1,25 0,049 REAR EPOXY WIRES 200,0+/-10 [7,874+/-0,393] 0,50 0,020 1,25 0,049 1,25 0,049 WIRES M16x1,0 2,00 0,079 13,50[0,531] 17,35 0,683 PINS 18,30 0,720 18,30 0,720 M16x1,0 0,50 0,020 1,25 0,049 1,25 0,049 4,75 0,187 13,50 0,531 17,50 0,689 SHORT BODY WIRES 18,30 0,720 M16x1,0 18,30 0,720 18,30 0,720 M16x1,0 0,50 0,020 1,25 0,049 1,25 0,049 REAR EPOXY WIRES 18,25 0,719 16,75 0,659 4,75 0,187 13,50 0,531 17,50 0,689 28,75 1,132 2,00 0,079 13,50[0,531] 19,60 0,772 16,00 0,630 14,50 1,450 www.apem.com 2,00 0,079 13,50[0,531] 19,60 0,772 200,0+/-10 [7,874+/-0,393] APEM Q SERIES O16mm (.630") Panel Mount LED Indicators 33,75 1,329 M16x1,0 5,00 0,197 13,50 0,531 28,75 1,132 WIRES REAR EPOXY WIRES M16x1,0 2 18,30 0,720 SHORT BODY PINS 5,00 0,197 13,50 0,531 17,50 0,689 18,25 0,719 16,75 0,659 SHORT BODY WIRES M16x1,0 18,30 0,720 5,00 ,197 13,50 0,531 17,50 0,689 M16x1,0 0,50 0,020 2,50 0,098 1,25 0,049 SQ 28,75 1,132 18,30 0,720 200,00+/-10 [7.874+/-0.393] REAR EPOXY PINS 18,30 0,720 18,30 0,720 M16x1,0 5,00 0,197 13,50 0,531 7,00 0,276 5,50 0,217 SQ 10,00 0,394 9,35 0,368 0,50 0,020 2,50 0,098 1,25 0,049 5,00 0,197 13,50 0,531 PINS 0,50 0,020 2,50 0,098 1,25 0,049 M16x1,0 18,30 0,720 18,30 0,720 SOLDER LUG/FASTONS 2,8x0,8[0,11x0,031] M16x1,0 RECESSED BEZEL SQ Technical Drawings 32,00 5,00 0,197 13,50 0,531 19,75 0,778 16,00 0,630 14,50 0,571 www.apem.com 5,00 0,197 13,50 0,531 19,75 0,778 200,00+/-10 [7.874+/-0.393] APEM Q SERIES O16mm (.630") Panel Mount LED Indicators Custom options Secret Until Lit Polycarbonate Inserts Off Suffix the part number with legend code (see example on page 5) Code Symbol Code Symbol Description P Description -3AH Turn Signal -3PB -313 Hazard -398 Side Lights -3GP Oil can -3SB Seat Belt -3AG Battery -3TP Tyre Pressure -327 Rear fog -3CE -397 Low beam -3EC Engine Temperature -3BU Brake test -3FP Fuel -3K6 Arrow -3BF -3AJ High beam CHECK BRAKE FAILURE Park Brake Check Engine Brake Failure Some common codes are listed above, for your custom requirements please contact APEM. 4 www.apem.com APEM Q SERIES O16mm (.630") Panel Mount LED Indicators Custom options Custom Engraving Cable length & connector For custom cable length and connectors please contact APEM Suffix the part number with legend code (see example on page 5) Code Symbol Description Code Symbol Description Code Symbol Description -0AJ High Beam -041 Horn -0EL Engine Coil -097 Low Beam -013 Hazard Warning -0SB Seat Belt -027 Rear Fog -018 Heating -0UB USB Connection -026 Front Fog -0BU Brake Test -0ST Steam -021 Windscreen Wiper -0K6 Arrow -0EU -022 Windscreen Washer -0AG Battery -0AD Side Step -023 Ventilator Fan -0GP Oil Can -012 Air Con -0AH Turn Signal -020 Windscreen Heating -040 Engine -098 Side Lights -086 ABS -0BR Boot/Trunk Release ABS ECU ECU Some common codes are listed above, for your custom requirements please contact APEM. Unless specified standard engraving with white infill will be supplied. APEM www.apem.com 5 Q SERIES O16mm (.630") Panel Mount LED Indicators Overview STANDARD OPTIONS The Q16 Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below. Q 16 F 1 G XX Y 24 E SERIES MOUNTING HOLE BEZEL STYLE TERMINALS BEZEL FINISH TYPE OF ILLUMINATION LED COLOR VOLTAGE SEALING P = Prominent 1 = Solder Lug/ Fastons (2.8 x 0.8) C = Bright Chrome R = Recess 2 = Pins B = Black Chrome F = Flush 3 = Wires G = Satin Grey Q 16 = O16mm Metal Plastic PP = Prominent FP = Flush 4 = Rear epoxy Pins Metal Plastic XX = Fixed Light R = Red 02 = no resistor* (Blank) = Unsealed KK = Flashing Light (12 - 28VDC) G = Green 06 = 6VDC E = IP67 Y = Yellow 12 = 12VDC B = Blue 12A = 12VAC/DC W = White 24 = 24VDC O = Orange 24A = 24VAC/DC YY = Bi-color ZZ = Tri-color BP = Black 5 = Rear epoxy Wires 28 = 28VDC 6 = Short body Pins 7 = Short body Wires HR = Hyper Bright Red 28A = 28VAC/DC HG = Hyper Bright Green 110 = 110VAC HY = Hyper Bright Yellow 220 = 220VAC HO = Hyper Bright Orange SR = Super Bright Red SG = Super Bright Green SY = Super Bright Yellow SB = Super Bright Blue SW = Super Bright White RG = Red/Green RY = Red/Yellow GY = Green/Yellow RYG = Red/Yellow/Green * Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-) * Standard wire length is 200mm, 22AWG UL1007, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM * For LEDs with alternative voltages consult APEM * Bi-color LEDs, by connecting the gold Faston (+) one color is produced, by reversing the supply voltage another color is produced - Bi-colors are available up to 28VDC * Take care when soldering to the Faston terminals (recommended solder temperature 300C - 3 sec) * Short body pins and wires are only available up to 28VDC * The Tri-color LED has red and green LEDs when both are connected yellow is produced * Standard Tri-color Faston terminals are two Anodes (+) and one Cathode (-) * Tri-color wires are one red (+) and one green (+) Anode and one black (-) Cathode * Tri-color pins are center (-) Cathode, shortest (+) Anode pin green, longest (+) Anode pin red * Maximum panel thickness 11mm * We recommend using Hyperbright or Superbright LEDs for use at 110VAC and 220VAC * For multi-voltage options please consult APEM * = For resistorless versions (02) please refer to the forward voltage on page 1 6 www.apem.com APEM Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Apem: Q16F1BXXB110E Q16F1BXXB12E Q16F1BXXG110E Q16F1BXXG12E Q16F1BXXG24E Q16F1BXXR110E Q16F1BXXR12E Q16F1BXXR24E Q16F1BXXW110E Q16F1BXXW12E Q16F1BXXW24E Q16F1BXXY110E Q16F1BXXY12E Q16F1BXXY24E Q16F1CXXB110E Q16F1CXXB12E Q16F1CXXB24E Q16F1CXXG110E Q16F1CXXG12E Q16F1CXXG24E Q16F1CXXR110E Q16F1CXXR12E Q16F1CXXR24E Q16F1CXXW110E Q16F1CXXW12E Q16F1CXXW24E Q16F1CXXY110E Q16F1CXXY12E Q16F1CXXY24E Q16P1BXXB110E Q16P1BXXB12E Q16P1BXXG110E Q16P1BXXG12E Q16P1BXXG24E Q16P1BXXR110E Q16P1BXXR12E Q16P1BXXR24E Q16P1BXXW110E Q16P1BXXW12E Q16P1BXXW24E Q16P1BXXY110E Q16P1BXXY12E Q16P1BXXY24E Q16P1BZZRYG12E Q16P1BZZRYG24E Q16P1CXXB110E Q16P1CXXB12E Q16P1CXXB24E Q16P1CXXG110E Q16P1CXXG12E Q16P1CXXG24E Q16P1CXXR110E Q16P1CXXR12E Q16P1CXXR24E Q16P1CXXW110E Q16P1CXXW12E Q16P1CXXW24E Q16P1CXXY110E Q16P1CXXY12E Q16P1CXXY24E Q16P1CZZRYG12E Q16P1CZZRYG24E Q16F1BXXB24E Q16P1BXXB24E Q16F1BXXG24AE Q16P3CZZRYG24E Q16P1BPXXG12E Q16F1BXXW220E Q16F1BXXB220E Q16F1BXXG220E Q16F1BXXR12AE Q16F1BXXR24AE Q16F1BXXY12AE Q16P1BXXSR02E Q16P3BXXW24E Q16PP5BPZZRYG02E Q16FP1BPXXG28E Q16FP1BPXXR28E Q16FP1BPXXSR28E Q16P1BXXHR12EX0130 Q16P1BXXHY12EX0130 Q16P1BXXSG02E Q16F5BXXHG12E3K6 Q16F5BXXHR12E3BF Q16F5BXXHR12E3BU Q16F5BXXHR12E3PB Q16F5BXXHR12E3SB Q16F5BXXHY12E327 Q16F1BXXSG220E Q16F1CZZRYG24 Q16F3CXXB24EX0034 Q16F3CXXG24EX0034 Q16F3CXXR24EX0034 Q16F5BXXB12E3AJ Q16F1CXXY24AE Q16F3BYYRG02E Q16P1BXXHG12EX0130 Q16P3BXXSY24AE Q16P1BXXG220E Q16F1BXXSG110E