DCD010
No.6517-1/2
Features
•Rectifier applications.
•Ideally suited for use in hybrid ICs because of
very small-sized package.
•Small interterminal capacitance.
Electrical Connection
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Peak Reverse Voltage VRM 20 V
Reverse Voltage VR20 V
Peak Forward Current IFM 200 mA
Average Rectified Current IO100 mA
Surge Current IFSM (1µs) 300 mA
Allowable Power Dissipation P 200 mW
Junction Temperature Tj 125 °C
Storage Temperature Tstg --55 to +125 °C
Electrical Characteristics at Ta=25°C
Ratings
Parameter Symbol Conditions min typ max Unit
Forward Voltage VFIF=10mA 1.0 V
Reverse Current IR1 VR=15V 0.1 µA
Interterminal Capacitance C VR=6V, f=1MHz 4.0 pF
Note)VF and IR are values per element.
C is the value for two elements.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Ordering number : ENN6517
DCD010
Package Dimensions
unit : mm
1251A
[DCD010]
42000 GI IM
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
Silicon Epitaxial Planar Type
Diodes
12
3
1 : Anode
2 : Cathode
3 : Cathode / Anode
0.4
0.95 0.95
1.9
2.9
0.5
1.5
2.5
0.5
0.16
0 to 0.1
0.8
1.1
2
3
1
1 : Anode
2 : Cathode
3 : Cathode / Anode
SANYO : CP
DCD010
No.6517-2/2
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of April, 2000. Specifications and information herein are subject to
change without notice.
PS
0.01 0.4 0.8 1.20
0.1
1.0
10
100
7
5
3
2
7
5
3
2
7
5
3
2
7
5
3
2
2.41.6 2.0
Forward Voltage, VF -- V
Forward Current, IF -- mA
IF -- VF
IT02091
0.01 5100
0.1
1.0
10
100
7
5
3
2
7
5
3
2
7
5
3
2
7
5
3
2
2015
Rev erse Voltage, VR -- V
Reverse Current, IR -- mA
IR -- VR
IT02093
0.01 0.4 0.8 1.20
0.1
1.0
10
100
7
5
3
2
7
5
3
2
7
5
3
2
7
5
3
2
1.6
Forward Voltage, VF -- V
Forward Current, IF -- mA
IF -- VF
IT02092
0
025
0.05
50
0.1
0.15
75 100
0.2
0.25
0.3
125
Ambient Temperature, Ta -- °C
PD -- Ta
Allowable Power Dissipation, PD -- W
IT02094
D1 125°C
D2 125°C
D1 100°C
D2 100°C
D1 75°C
D2 75°C
75°C
25°C
--25°C
Ta=125°C
Ta=125°C
Ta=125°C
25°C
25°C
--25°C
--25°C
75°C
75°C
D1+D2
D1 D2
