DS1692,DS3692 DS1692/DS3692 -TRISTATE Differential Line Drivers Literature Number: SNOSBK3 DS1692/DS3692 TRI-STATE (R) Differential Line Drivers General Description The DS1692/DS3692 are low power Schottky TTL line drivers electrically similar to the DS1691A/DS3691 but tested to meet the requirements of MIL-STD-188-114A (see Application Note AN-216). MIL-STD-188-114A type 1 driver specifications can be met by adding an external three resistor voltage divider to the output of the DS3692/1692. The DS3692/ 1692 feature 4 buffered outputs with high source and sink current capability with internal short circuit protection. With the mode select pin low, the DS1692/DS3692 are dual differential line drivers with TRI-STATE outputs. They feature 10V output common-mode range in TRI-STATE and 0V output unbalance when operated with 5V supply. Multipoint applications in differential mode with waveshaping capacitors is not allowed. Features n Short circuit protection for both source and sink outputs n 100 transmission line drive capability n Low ICC and IEE power consumption: Differential mode: ICC = 9 mA/driver typ, IEE = 5 mA/driver typ n Low current PNP inputs compatible with TTL, MOS and CMOS n Adaptable as MIL-STD-188-114A type 1 driver Logic Diagram (12 Circuit Shown) DS005784-1 Connection Diagram Inputs Outputs Mode A (D) Disable1 (2) A (D) B (C) 0 0 0 0 1 0 0 1 0 1 0 0 1 1 TRI-STATE TRI-STATE 1 0 TRI-STATE TRI-STATE DS005784-2 *Contact Product Marketing for availability. Top View Order Number DS1692J, DS3692J, DS3692M or DS3692N See NS Package Number J16A, M16A* or N16A TRI-STATE (R) is a registered trademark of National Semiconductor Corporation. (c) 1999 National Semiconductor Corporation DS005784 www.national.com DS1692/DS3692 TRI-STATE Differential Line Drivers March 1992 Absolute Maximum Ratings (Note 2) Operating Conditions If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage DS1692 VCC VEE DS3692 VCC VEE Temperature (TA) DS1692 DS3692 Supply Voltage 7V VCC -7V VEE Maximum Power Dissipation (Note 1) at 25C Cavity Package 1509 mW Molded Package 1476 mW Input Voltage 15V 15V Output Voltage (Power OFF) Storage Temperature -65C to +150C Lead Temperature (Soldering, 4 sec.) 260C Min Max Units 4.5 -4.5 5.5 -5.5 V V 4.75 -4.75 5.25 -5.25 V V -55 0 +125 +70 C C Note 1: Derate cavity package 10.1 mW/C; derate molded package 11.9 mW/C above 25C. Electrical Characteristics DS1692/DS3692 (Notes 3, 4, 5) Symbol Parameter Conditions Min Typ Max DS1692, VCC = 5V 10%, DS3692, VCC = 5V 5%, VEE CONNECTION TO GROUND, MODE SELECT 0.8V VO Differential Output Voltage RL = VIN = 2V 2.5 3.6 VO VA,B VIN = 0.8V -2.5 -3.6 VT Differential Output Voltage RL = 100 VIN = 2V 2 2.6 VT VOS, VOS VA,B Common-Mode Offset VCC 4.75V RL = 100 VIN = 0.8V -2 -2.6 Units V V V V 2.5 3 V RL = 100 0.05 0.4 V RL = 100 0.05 0.4 V -0.002 -0.15 mA 0.002 0.15 mA 80 150 mA -80 -150 mA -80 -150 mA 80 150 mA Supply Current 18 30 DS1692, VCC = 5V 10%, VEE = -5V 10%, DS3692, VCC = 5V 5%, VEE = -5 5%, MODE SELECT 0.8V VO Differential Output Voltage RL = VIN = 2.4V 7 8.5 VO VA,B VIN = 0.4V -7 -8.5 VT Differential Output Voltage RL = 200 VIN = 2.4V 6 7.3 VT VA,B VIN = 0.4V -6 -7.3 mA Voltage |VT| - |VT | Difference in Differential Output Voltage |VOS| - |VOS | Difference in CommonMode Offset Voltage VSS |VT - VT | RL = 100, VCC 4.75V IOX TRI-STATE Output Current VO -10V ISA Output Short Circuit Current VO 15V VIN = 0.4V ISB Output Short Circuit Current VIN = 2.4V VOA = 6V VOB = 0V VOA = 0V VOB = 6V 4.0 4.8 V ICC |VT| - |VT | Output Unbalance IOX TRI-STATE Output Current |VCC| = |VEE|, RL = 200 VO = 10V IS+ Output Short Circuit Current VO = 0V IS- ISLEW Slew Control Current ICC Positive Supply Current IEE Negative Supply Current www.national.com V V 0.02 0.4 V 0.002 0.15 mA VO = -10V VIN = 2.4V -0.002 -0.15 mA -80 -150 mA VIN = 0.4V 80 150 mA 18 30 mA -10 -22 mA 140 VIN = 0.4V, RL = VIN = 0.4V, RL = 2 V V A Electrical Characteristics VEE 0V (Notes 3, 4) Symbol Parameter Conditions Min Typ Max Units VIH High Level Input Voltage 2 VIL Low Level Input Voltage IIH High Level Input Current VIN = 2.4V 1 100 A Low Level Input Current VIN 15V VIN = 0.4V 10 IIL -30 -200 A VI Input Clamp Voltage IXA Output Leakage Current IXB Power OFF IIN = -12 mA VCC = VEE = 0V VO = 15V VO = -15V V 0.8 V 40 A -1.5 V 0.01 0.15 mA -0.01 -0.15 mA Switching Characteristics TA = 25C Symbol Parameter VCC = 5V, MODE SELECT = 0.8V tr Differential Output Rise Time tf Differential Output Fall Time tPDH Output Propagation Delay tPDL Output Propagation Delay tPZL TRI-STATE Delay tPZH TRI-STATE Delay tPLZ TRI-STATE Delay tPHZ VCC TRI-STATE Delay = 5V, VEE = -5V, MODE SELECT = 0.8V tr Differential Output Rise Time tf Differential Output Fall Time tPDL Output Propagation Delay tPDH Output Propagation Delay tPZL TRI-STATE Delay tPZH TRI-STATE Delay tPLZ TRI-STATE Delay tPHZ TRI-STATE Delay Conditions Min Typ Max Units RL = 100, CL = 500 pF RL = 100, CL = 500 pF RL = 100, CL = 500 pF RL = 100, CL = 500 pF (Figure 1) 120 200 ns (Figure 1) 120 200 ns (Figure 1) 120 200 ns (Figure 1) 120 200 ns RL = 100, CL = 500 pF RL = 100, CL = 500 pF RL = 100, CL = 500 pF RL = 100, CL = 500 pF (Figure 2) 180 250 ns (Figure 2) 180 250 ns (Figure 2) 80 150 ns (Figure 2) 80 150 ns 500 pF (Figure 1) 190 300 ns 500 pF (Figure 1) 190 300 ns 500 pF (Figure 1) 190 300 ns 500 pF (Figure 1) 190 300 ns 2) 180 250 ns 2) 180 250 ns 2) 80 150 ns 2) 80 150 ns RL = 200, CL = RL = 200, CL = RL = 200, CL = RL = 200, CL = RL = 200, CL = 500 pF (Figure RL = 200, CL = 500 pF (Figure RL = 200, CL = 500 pF (Figure RL = 200, CL = 500 pF (Figure Note 2: "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The table of "Electrical Characteristics" provide conditions for actual device operation. Note 3: Unless otherwise specified, min/max limits apply across the -55C to +125C temperature range for the DS1692 and across the 0C to +70C range for the DS3692. All typicals are given for VCC = 5V and TA = 25C. VCC and VEE as listed in operating conditions. Note 4: All currents into device pins are positive; all currents out of device pins are negative. All voltages are referenced to ground unless otherwise specified. Note 5: Only one output at a time should be shorted. 3 www.national.com AC Test Circuits and Switching Time Waveforms DS005784-4 DS005784-3 FIGURE 1. Differential Connection DS005784-5 DS005784-6 FIGURE 2. TRI-STATE Delays for DS1692/DS3692 Switching Waveforms DS005784-7 DS005784-8 www.national.com 4 Physical Dimensions inches (millimeters) unless otherwise noted Ceramic Dual-In-Line Package (J) Order Number DS1692J, DS3692J NS Package Number J16A Small Outline Package (M) Order Number DS3692M NS Package Number M16A 5 www.national.com DS1692/DS3692 TRI-STATE Differential Line Drivers Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Molded Dual-In-Line Package (N) Order Number DS3692N NS Package Number N16A LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com www.national.com National Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 1 80-530 85 85 English Tel: +49 (0) 1 80-532 78 32 Francais Tel: +49 (0) 1 80-532 93 58 Italiano Tel: +49 (0) 1 80-534 16 80 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: sea.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5639-7560 Fax: 81-3-5639-7507 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page www.ti.com/video e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated