55 Series - Miniature General Purpose Relays 7 -10 A 55.12 55.13 55.14 - P.C.B. versions - AC or DC coils - Lockable test button and mechanical flag indicator as standard on 2 and 4 CO relays types - Sockets and accessories: see 94, 99 and 86 series - RT III (wash tight) version available - 2 pole, 10 A - P.C.B. mounting - 3 pole, 10 A - P.C.B. mounting 1 54 8 - 4 pole, 7 A - P.C.B. mounting 1 52 63 74 8 1 42 53 6 55 12 8 13 A1 9 9 10 11 13 A1 14 A2 20.7 20.7 6.6 6.6 4.4 4.4 4.4 12 13 14 3 6 5 6 7 8 9 13 Copper side view 14 2 3 4 5 6 7 8 9 10 11 12 13 Copper side view 14 Copper side view h = 35.8 mm h = 35.8 mm 1 1.5 9 2 1 27.7 8 1.5 4 6.35 6.35 4.1 4.2 20.7 5 12 14 A2 13.2 27.7 1 14 A2 6.35 6.35 4.1 4.2 27.7 1.5 13 A1 7 6.35 6.35 4.1 4.2 9 h = 35.8 mm Contact specifications Contact configuration Rated current/Maximum peak current A Rated voltage/Maximum switching voltage V AC Rated load in AC1 VA Rated load in AC15 (230 VAC) Single phase motor rating (230 VAC) Breaking capacity in DC1: 30/110/220V Minimum switching load 2 CO 3 CO 4 CO 10/20 10/20 7/15 250/400 250/400 250/250 2,500 2,500 1,750 VA 500 500 350 kW 0.37 0.37 0.125 10/0.25/0.12 10/0.25/0.12 7/0.25/0.12 300 (5/5) 300 (5/5) 300 (5/5) AgNi AgNi AgNi A mW (V/mA) Standard contact material Coil specifications Nominal voltage (UN) V AC (50/60 Hz) 6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240 V DC Rated power AC/DC VA (50 Hz)/W Operating range 6 - 12 - 24 - 48 - 60 - 110 -125 - 220 1.5/1 1.5/1 1.5/1 AC (0.8...1.1)UN (0.8...1.1)UN (0.8...1.1)UN DC (0.8...1.1)UN (0.8...1.1)UN (0.8...1.1)UN Holding voltage AC/DC 0.8 UN/0.5 UN 0.8 UN/0.5 UN 0.8 UN/0.5 UN Must drop-out voltage AC/DC 0.2 UN/0.1 UN 0.2 UN/0.1 UN 0.2 UN/0.1 UN Technical data Mechanical life AC/DC cycles 20 * 106/50 * 106 20 * 106/50 * 106 20 * 106/50 * 106 Electrical life at rated load AC1 cycles 200 * 103 200 * 103 150 * 103 9/3 9/3 9/3 3.6 kV/2 3.6 kV/2 2.5 kV/2 3.6 3.6 3.6 Insulation between coil and contacts (1.2/50s) kV Dielectric strength between open contacts Ambient temperature range Environmental protection C 1,000 1,000 1,000 -40...+85 -40...+85 -40...+85 RT I RT I GOST IO AC N DE CONFORMIDAD DE LA FAB R ICACIO Approvals: (according to type) V AC TIFI ER C Insulation according to EN 61810-5 C ms N Operate/release time RT I RINA (R) C US 43 55 Series - Miniature General Purpose Relays 7 -10 A 55.32 55.33 55.34 - 2 pole, 10 A - Plug-in for use with 94 Series sockets - 3 pole, 10 A - Plug-in for use with 94 Series sockets - 4 pole, 7 A - Plug-in for use with 94 Series sockets - Plug-in versions - AC or DC coils - Lockable test button and mechanical flag indicator as standard on 2 and 4 CO relays types - Sockets and accessories: see 94, 99 and 86 series 1 5 4 8 12 7 14 A2 27.7 9 9 10 20.7 11 12 13 A1 14 A2 14 A2 20.7 27.7 27.7 5.6 5.6 37.2 37.2 20.7 8 13 A1 37.2 9 13 A1 5.6 55 1 52 6 3 7 4 8 1 4 2 53 6 13.2 6.6 6.6 6.35 6.35 4.1 4.2 6.35 6.35 4.1 4.2 4.4 4.4 4.4 6.35 6.35 4.1 4.2 Contact specifications Contact configuration Rated current/Maximum peak current A Rated voltage/Maximum switching voltage V AC Rated load in AC1 VA Rated load in AC15 (230 VAC) Single phase motor rating (230 VAC) Breaking capacity in DC1: 30/110/220V Minimum switching load 2 CO 3 CO 4 CO 10/20 10/20 7/15 250/400 250/400 250/250 2,500 2,500 1,750 VA 500 500 350 kW 0.37 0.37 0.125 10/0.25/0.12 10/0.25/0.12 7/0.25/0.12 300 (5/5) 300 (5/5) 300 (5/5) AgNi AgNi AgNi A mW (V/mA) Standard contact material Coil specifications Nominal voltage (UN) V AC (50/60 Hz) 6 - 12- 24 - 48 - 60 - 110 - 120 - 230 - 240 V DC Rated power AC/DC VA (50 Hz)/W Operating range 6 - 12 - 24 - 48 - 60 - 110 - 125 - 220 1.5/1 1.5/1 1.5/1 AC (0.8...1.1)UN (0.8...1.1)UN (0.8...1.1)UN DC (0.8...1.1)UN (0.8...1.1)UN (0.8...1.1)UN Holding voltage AC/DC 0.8 UN/0.5 UN 0.8 UN/0.5 UN 0.8 UN/0.5 UN Must drop-out voltage AC/DC 0.2 UN/0.1 UN 0.2 UN/0.1 UN 0.2 UN/0.1 UN Technical data Mechanical life AC/DC cycles 20 * 106/50 * 106 20 * 106/50 * 106 20 * 106/50 * 106 Electrical life at rated load AC1 cycles 200 * 103 200 * 103 150 * 103 9/3 9/3 9/3 3.6 kV/2 3.6 kV/2 2.5 kV/2 3.6 3.6 3.6 Insulation between coil and contacts (1.2/50s) kV Dielectric strength between open contacts Ambient temperature range Environmental protection 44 C 1,000 1,000 1,000 -40...+85 -40...+85 -40...+85 RT I RT I RT I GOST IO AC N DE CONFORMIDAD DE LA FAB R ICACIO Approvals: (according to type) V AC TIFI ER C Insulation according to EN 61810-5 C ms N Operate/release time RINA (R) C US 55 Series - Miniature General Purpose Relays 7 -10 A ORDERING INFORMATION Example: a 55 series plug-in relay, 4 CO contacts, coil rated 12 V DC with a lockable test button and mechanical indicator. A 5 5 . 3 4 . 9 . 0 1 2 . 0 Series B C D 0 4 0 A: Contact material 0 = Standard AgNi 2 = AgCdO 5 = AgNi + 5m Au Type 1 = P.C.B. 3 = Plug-in D: Special versions 0 = Standard 1 = Wash tight (RT III) for 55.12, 55.13 and 55.14 only 6 = Rear flange mount B: Contact circuit 0 = CO No. of poles 2 = 2 pole, 10 A 3 = 3 pole, 10 A 4 = 4 pole, 7 A C: Options 0 = None 1 = Lockable test button 2 = Mechanical indicator 3 = LED (AC) 4 = Lockable test button + mechanical indicator 5 = Lockable test button + LED (AC) 54 = Lockable test button + LED (AC) + mechanical indicator 6 = Double LED (DC not polarized) 7 = Lockable test button + double LED (DC not polarized) 74 = Lockable test button + double LED (DC not polarized) + mechanical indicator 8 = LED + diode (positive to pin A1/13, DC standard polarity) 9 = Lockable test button + LED + diode (positive to pin A1/13, DC standard polarity) 94 = Lockable test button + LED + diode (positive to pin A1/13, DC standard polarity) + mechanical indicator Coil version 8 = AC (50/60 Hz) 9 = DC Coil voltage see coil specifications Only combinations in the same row are possible Preferred versions coil version A B C 55.32/34 AC/DC 55.12/13/14 AC/DC 55.33 AC/DC 0 0 0 D 0 0 0 4 0 0 0 0 0 B 0 0 0 0 0 0 0 0 0 C 0 2-3-4-5 54 2-4-6 -7-8-9 74 - 94 0 1-3-5 1-6-7-8-9 0 D 00/ 0/ 0000- All versions coil version 55.32/34 AC/DC AC AC DC DC 55.33 AC/DC AC DC 55.12/13/14 AC/DC A 000000000- 2 2 2 2 2 2 2 2 2 - 5 5 5 5 5 5 5 5 5 6 6 55 6 6 6 6 1 POSSIBLE OPTIONS AC DC - Not polarized DC - Standard polarity 3.6 41.9 13 A1 Option = 0030 0050 0054 14 A2 13 A1 14 A2 Option = 0060 0070 0074 13 A1 14 A2 Option = 0080 0090 0094 Option = 0006 REAR FLANGE MOUNT LOCKABLE TEST BUTTON AND MECHANICAL FLAG INDICATOR (0040) The dual-purpose Finder test button can be used in two ways: Case 1) The plastic pip (located directly above the test button) remains intact. In this case, when the test button is pushed, the contacts operate. When the test button is released the contacts return to their former state. Case 2) The plastic pip is broken-off (using an appropriate cutting tool). In this case, (in addition to the above function), when the test button is pushed and rotated, the contacts are latched in the operating state, and remain so until the test button is rotated back to its former position. In both cases ensure that the test button actuation is swift and decisive. 45 55 Series - Miniature General Purpose Relays 7 -10 A ACCESSORIES Adaptor with top mount flange (for 55.32/33/34) 055.05 3.6 37.5 44.4 44.4 055.05 15 3.5 34.3 1.7 TECHNICAL DATA 55 INSULATION INSULATION according to EN 61810-5 insulation rated voltage rated impulse withstand voltage V 400 (2-3 pole) 250 (4 pole) kV 3.6 (2-3 pole) 2.5 (4 pole) pollution degree 2 overvoltage category III IMMUNITY CONDUCTED DISTURBANCE IMMUNITY BURST (according to EN 61000-4-4) level 4 (4 kV) SURGE (according to EN 61000-4-5) level 4 (4 kV) OTHER DATA BOUNCE TIME: NO/NC VIBRATION RESISTANCE (10...55Hz): NO/NC ms 1/4 g/g 6/6 POWER LOST TO THE ENVIRONMENT 2 CO 3 CO 4 CO - without contact current W 1 1 1 - with rated current W 3 4 3 mm 5 RECOMMENDED DISTANCE between RELAYS mounted on P.C.B.s CONTACT SPECIFICATIONS H 55 F 55 10 7 6 2 1 10 DC BREAKING CURRENT (A) CYCLES 10 5 0 4 8 12 LOAD RATED CURRENT (A) Electrical life vs AC1 load. 1 = 4 CO relay type (7 A). 2 = 2 - 3 CO relay type (10 A). 16 20 10 6 4 A B C 1 2 D 2 1 0.2 0.1 20 60 100 140 180 220 DC VOLTAGE (V) Breaking capacity for DC1 load. 1 = 2 - 3 CO type. 2 = 4 CO type. A = Load applied to 1 contact B = Load applied to 2 contacts in series C = Load applied to 3 contacts in series D = Load applied to 4 contacts in series * When switching a resistive load (DC1) having voltage and current values under the curve the expected electrical life is 100*103 cycles. * In case of DC13 loads the connection of a diode in parallel with the load will permit the same electrical life as for a DC1 load. Note: the release time of load will be increase. 46 55 Series - Miniature General Purpose Relays 7 -10 A COIL SPECIFICATIONS AC VERSION DATA DC VERSION DATA Nominal voltage UN V 6 12 24 48 60 110 125 220 Coil code 9.006 9.012 9.024 9.048 9.060 9.110 9.125 9.220 Operating range Umin V 4.8 9.6 19.2 38.4 48 88 100 176 Resistance Rated coil consumption R I at UN mA 40 150 140 86 600 40 2,400 20 4,000 15 12,500 8.8 17,300 7.2 54,000 4 Umax V 6.6 13.2 26.4 52.8 66 121 137.5 242 Nominal voltage UN V 6 12 24 48 60 110 120 230 240 Coil code Operating range Umin V 4.8 9.6 19.2 38.4 48 88 96 184 192 8.006 8.012 8.024 8.048 8.060 8.110 8.120 8.230 8.240 R 55 DC R 55 AC U 2.0 UN U 2.0 UN Umax V 6.6 13.2 26.4 52.8 66 121 132 253 264 Resistance Rated coil consumption R I at UN (50Hz) mA 12 200 50 97 190 53 770 25 1,200 21 4,000 12.5 4,700 12 17,000 6 19,100 5.3 55 1 1.5 1 1.5 1.0 1.0 2 0.5 2 0.5 -20 0 20 40 60 80 AMBIENT TEMPERATURE (C) Operating range (DC type) vs ambient temperature. 1 - Max coil voltage permitted. 2 - Min pick-up voltage with coil at ambient temperature. -20 0 20 40 60 80 AMBIENT TEMPERATURE (C) Operating range (AC type) vs ambient temperature. 1 - Max coil voltage permitted. 2 - Min pick-up voltage with coil at ambient temperature. 47 94 Series - Sockets and Accessories for 55 Series Relays Relay type 55.32 Colour BLUE BLACK BLUE 55.33 BLACK BLUE BLACK Clamp terminal socket: panel or 35 mm rail (EN 50022) mount retaining clip 094.71 supplied with socket packaging code SMA 94.02 94.02.0 94.03 94.03.0 94.04 94.04.0 Metal retaining clip 94.04 Approvals (according to type): 094.71 Plastic retaining and release clip 094.01 6-way jumper link for 94.02, 94.03 and 94.04 sockets 094.06 094.06.0 094.06 094.06.0 094.06 094.06.0 Identification tag 094.00.4 Modules (see table below) 86.10, 86.20 Sheet of marker tags for retaining and release clip 094.01 27 25.9 27 60.9 17.5 17.5 35.6 18.9 34.9 34.9 mm2 1x6 / 2x2.5 1x4 / 2x2.5 O3 76 O3 76 O3 O 3.2 O 3.2 21.5 27 34.9 RATED VALUES: 10 A - 250 V DIELECTRIC STRENGTH: 2 kV AC PROTECTION CATEGORY: IP 20 AMBIENT TEMPERATURE: (-40...+70)C SCREW TORQUE: 0.5 Nm WIRE STRIP LENGTH: 8 mm MAX WIRE SIZE: solid wire stranded wire 060.72 O 3.2 55 - U 99.02 Timer modules 76 GOST C (R) 55.32, 55.34 AWG 1x10 / 2x14 1x12 / 2x14 32 41 12 11 9 COM 31 9 21 8 11 7 COM 41 12 31 11 21 10 11 9 COM 44 8 14 5 NO 34 6 24 5 14 4 NO 44 8 34 7 24 6 14 5 NO 42 4 12 1 NC 32 3 22 2 12 1 NC 42 4 32 3 22 2 12 1 NC A2 14 A1 13 35.5 094.01 A2 14 FOR 94.02, 94.03 AND 94.04 SOCKETS: A1 13 A2 14 COIL 94.02 6-way jumper link A1 13 COIL COIL 94.04 94.03 094.06 135 3.3 - RATED VALUES: 10 A - 250 V 10.3 7 5.1 094.06 0.75 26.25 27 86 Series Module Timers (see technical data pages 126/131) BLUE Mono-function: 12...24 V AC/DC; function AI; (1.5s...60min) 86.10.0.024.0000 Mono-function: 12...24 V AC/DC; function DI; (1.5s...60min) 86.20.0.024.0000 86.10 99.02 coil indication and EMC suppression modules (see technical data page 179) Diode** (+A1, standard polarity) (6...220) V DC Diode (+A2, non standard polarity) (6...220) V DC LED (6...24) V DC/AC 99.02 LED (28...60) V DC/AC Approvals LED (110...240) V DC/AC (according to type): LED + Diode** (+A1, standard polarity) (6...24) V DC (R) LED + Diode** (+A1, standard polarity) (28...60) V DC GOST C US LED + Diode** (+A1, standard polarity) (110...220) V DC * Modules in Black LED + Diode (+A2, non standard polarity) (6...24) V DC housing are LED + Diode (+A2, non standard polarity) (28...60) V DC available on request. LED + Diode (+A2, non standard polarity) (110...220) V DC LED + Varistor (6...24) V DC/AC **For DC supply, (28...60) V DC/AC apply the positive LED + Varistor LED + Varistor (110...240) V DC/AC to terminal A1. RC circuit (6...24) V DC/AC RC circuit (28...60) V DC/AC RC circuit (110...240) V DC/AC 48 Residual current by-pass (62 k/1W) (110...240) V AC BLUE* 99.02.3.000.00 99.02.2.000.00 99.02.0.024.59 99.02.0.060.59 99.02.0.230.59 99.02.9.024.99 99.02.9.060.99 99.02.9.220.99 99.02.9.024.79 99.02.9.060.79 99.02.9.220.79 99.02.0.024.98 99.02.0.060.98 99.02.0.230.98 99.02.0.024.09 99.02.0.060.09 99.02.0.230.09 99.02.8.230.07 27 27 26.25 94 Series - Sockets and Accessories for 55 Series Relays Relay type 55.32 Colour BLUE BLACK BLUE BLACK BLUE BLACK Screw terminal socket: panel or 35 mm rail (EN 50022) mount retaining clip 094.71 supplied with socket packaging code SMA 94.72 94.72.0 94.73 94.73.0 94.74 94.74.0 Retaining clip 94.74 = O3 solid wire 24 NO 24 5 14 4 NC 32 3 22 2 12 1 A1 42 4 12 1 A2 14 A1 13 COIL 35 36.3 26 34 6 23 24 23 30 27 14 5 19 19 = 23 24 30 44 8 70.5 O 4.1 O 4.2 35 68.5 35 36.3 C - RATED VALUES: 10 A - 250 V - DIELECTRIC STRENGTH: 2 kV AC - PROTECTION CATEGORY: IP 20 - AMBIENT TEMPERATURE: (-40...+70)C SCREW TORQUE: 0.5 Nm - WIRE STRIP LENGTH: 8 mm - MAX WIRE SIZE: O3 O3 19 US O 4.2 C 70.5 (R) R ICACIO TIFI ER C FAB N CONFORMIDAD DE LA 16.5 14.5 16.5 99.01 GOST N DE 55.32, 55.34 094.71 Modules (see table below) Approvals (according to type): IO AC 55.33 30 27 NO 44 8 34 7 24 6 14 5 NO NC 42 4 32 3 22 2 12 1 NC COIL A2 14 A1 13 COIL COM 41 12 31 11 21 10 11 9 COM 55 stranded wire mm2 1x2.5 / 2x1.5 1x2.5 / 2x1.5 41 12 11 9 A2 31 9 COM 21 8 11 7 94.72 Relay type 55.32 Colour BLUE BLACK Screw terminal socket: panel or 35 mm rail (EN 50022) mount retaining clip 094.71 supplied with socket packaging code SMA 94.82 94.82.0 Retaining clip 99.01 RATED VALUES: 10 A - 250 V DIELECTRIC STRENGTH: 2 kV AC PROTECTION CATEGORY: IP 20 AMBIENT TEMPERATURE: (-40...+70)C SCREW TORQUE: 0.5 Nm WIRE STRIP LENGTH: 9 mm 99.01 GOST * Modules in Black housing are available on request. 12 1 NC 44 8 14 5 NO 41 12 11 9 COM A2 14 A1 13 COIL 23 29.5 O 4.2 - MAX WIRE SIZE: solid wire stranded wire mm 1x2.5 / 2x1.5 1x2.5 / 2x1.5 2 AWG 1x14 / 2x16 1x14 / 2x16 94.82 FOR 94.72, 94.73, 94.74 AND 94.82 SOCKETS: Approvals (according to type): 42 4 35 GOST US 15.5 (R) C 99.01 coil indication and EMC suppression modules (see technical data pag. 179) BLUE* Diode** (+A1, standard polarity) (6...220) V DC 99.01.3.000.00 Diode (+A2, non standard polarity) (6...220) V DC 99.01.2.000.00 (6...24) V DC/AC 99.01.0.024.59 LED (28...60) V DC/AC 99.01.0.060.59 LED (110...240) V DC/AC 99.01.0.230.59 LED LED + Diode** (+A1, standard polarity) (6...24) V DC 99.01.9.024.99 LED + Diode** (+A1, standard polarity) (28...60) V DC 99.01.9.060.99 LED + Diode** (+A1, standard polarity) (110...220) V DC 99.01.9.220.99 LED + Diode (+A2, non standard polarity) (6...24) V DC 99.01.9.024.79 LED + Diode (+A2, non standard polarity) (28...60) V DC 99.01.9.060.79 99.01.9.220.79 LED + Diode (+A2, non standard polarity) (110...220) V DC **For DC supply, apply the positive to terminal A1. LED + Varistor (6...24) V DC/AC 99.01.0.024.98 LED + Varistor (28...60) V DC/AC 99.01.0.060.98 LED + Varistor (110...240) V DC/AC 99.01.0.230.98 Green LED is standard. Red LED available on request. RC circuit (6...24) V DC/AC 99.01.0.024.09 RC circuit (28...60) V DC/AC 99.01.0.060.09 RC circuit (110...240) V DC/AC 99.01.0.230.09 (110...240) V AC 99.01.8.230.07 Residual current by-pass (62 k/1W) 40.3 Approvals (according to type): 094.71 Modules (see table below) 71.3 94.82 - 94.74 94.73 20.8 AWG 1x14 / 2x16 1x14 / 2x16 26 49 94 Series - Sockets and Accessories for 55 Series Relays 94.84.3 Approvals (according to type): Relay type 55.32 Colour BLUE BLACK 55.32, 55.34 BLUE BLACK Clamp terminal socket: panel or 35 mm rail (EN 50022) mount retaining clip 094.71 supplied with socket packaging code SMA 94.82.3 94.82.30 94.84.3 94.84.30 Retaining clip 094.71 Plastic retaining and release clip 094.91.3 Identification tag 094.80.2 Modules (see table below) 99.80 86.12 solid wire 64.81 27 14 5 NO 44 8 34 7 24 6 14 5 NO 42 4 12 1 NC 42 4 32 3 22 2 12 1 NC A2 14 A1 13 31 11 21 10 A2 14 stranded wire mm 1x6 / 2x2.5 1x4 / 2x2.5 2 AWG 1x10 / 2x14 1x12 / 2x14 46.81 20.8 44 8 A1 13 41 12 COIL 11 9 COM 41 12 94.82.3 35.6 COIL 11 9 COM 19.9 RATED VALUES: 10 A - 250 V DIELECTRIC STRENGTH: 2 kV AC PROTECTION CATEGORY: IP 20 AMBIENT TEMPERATURE: (-40...+70)C SCREW TORQUE: 0.5 Nm WIRE STRIP LENGTH: 7 mm MAX WIRE SIZE: 76.22 55 - 94.84.3 24.8 Relay type 94.54.1 Approvals (according to type): 55.32, 55.34 Colour BLUE BLACK Screwless terminal socket: 35 mm rail (EN 50022) mount retaining clip 094.91 supplied with socket packaging code SPA 94.54.1 94.54.10 Retaining clip 094.71 Plastic retaining and release clip 094.91 Identification tag -- Modules (see table below) 99.80 42.5 33.2 31 RATED VALUES: 10 A - 250 V DIELECTRIC STRENGTH: 2 kV AC PROTECTION CATEGORY: IP 20 AMBIENT TEMPERATURE: (-25...+70)C WIRE STRIP LENGTH: 7 mm MAX WIRE SIZE: solid wire 41 12 31 11 21 10 11 9 COM 44 8 34 7 24 6 14 5 NO 42 4 32 3 22 2 12 1 NC A1 13 COIL 30 24 stranded wire 35 - mm2 2x(0.2...1.5) 2x(0.2...1.5) A2 14 30 AWG 2x(24...18) 2x(24...18) 6 94.54.1 15.45 FOR 94.82.3, 94.84.3 AND 94.54.1 SOCKETS: 99.80 coil indication and EMC suppression modules (see technical data page 179) Diode** (+A1, standard polarity) 99.80 Approvals (according to type): 50 BLUE* (6...220) V DC 99.80.3.000.00 LED (6...24) V DC/AC 99.80.0.024.59 LED (28...60) V DC/AC 99.80.0.060.59 LED (110...240) V DC/AC 99.80.0.230.59 LED + Diode** (+A1, standard polarity) (6...24) V DC 99.80.9.024.99 LED + Diode** (+A1, standard polarity) (28...60) V DC 99.80.9.060.99 99.80.9.220.99 GOST LED + Diode** (+A1, standard polarity) (110...220) V DC * Modules in Black housing are available on request. LED + Varistor (6...24) V DC/AC 99.80.0.024.98 LED + Varistor (28...60) V DC/AC 99.80.0.060.98 LED + Varistor (110...240) V DC/AC 99.80.0.230.98 **For DC supply, apply the positive to terminal A1. RC circuit (6...24) V DC/AC 99.80.0.024.09 RC circuit (28...60) V DC/AC 99.80.0.060.09 RC circuit (110...240) V DC/AC 99.80.0.230.09 (110...240) V AC 99.80.8.230.07 Green LED is standard. Residual current by-pass (62 k/1W) Red LED available on request. 27 94 Series - Sockets and Accessories for 55 Series Relays 55.32 BLUE BLACK BLUE BLACK BLUE BLACK P.C.B. socket retaining clip 094.51 supplied with socket packaging code SMA 94.12 94.12.0 94.13 94.13.0 94.14 94.14.0 Metal retaining clip ICACIO C US N C - RATED VALUES: 10 A - 250 V - DIELECTRIC STRENGTH: 2 kV AC - AMBIENT TEMPERATURE: (-40...+70)C 3.7 11.5 25.5 (R) R 21.5 29.5 FAB 29.5 CONFORMIDAD DE LA TIFI ER C N DE 21.5 29.5 21.5 IO AC 55.32, 55.34 094.51 Approvals (according to type): GOST 55.33 8.5 = 13.2 = 6.6 = 5.3 4.1 5.3 4.1 29.5 1.5 29.5 1.5 = = 6.3 6.3 7.5 4.4 = 5.3 4.1 29.5 1.5 94.14 Relay type Colour 6.3 55 7.5 7.5 21.5 21.5 21.5 94.12 94.13 94.14 Copper side view 55.32 Colour BLUE BLACK BLUE BLACK BLUE BLACK Panel mount solder socket: 1 mm thick panel retaining clip 094.51 supplied with socket packaging code SMA 94.22 94.22.0 94.23 94.23.0 94.24 94.24.0 17 21.5 ICACIO C US 25.5 (R) R 29.5 FAB 29.5 CONFORMIDAD DE LA 29.5 N DE TIFI ER C IO AC 21.8 9.5 94.22 94.23 2 94.24 N C Relay type 55.32 Colour BLUE BLACK BLUE BLACK BLUE BLACK Panel mount socket: M3 screw mount - solder connections retaining clip 094.51 supplied with socket packaging code SMA 94.32 94.32.0 94.33 94.33.0 94.34 94.34.0 55.33 Metal retaining clip 7.5 (R) 17 8.5 3 US 40.5 40.5 40.5 26.5 C - RATED VALUES: 10 A - 250 V - DIELECTRIC STRENGTH: 2 kV AC - AMBIENT TEMPERATURE: (-40...+70)C 21.5 21.5 = C 34 R 21.5 O 3.2 = FAB ICACIO TIFI ER C CONFORMIDAD DE LA N DE ION AC 55.32, 55.34 094.51 Approvals (according to type): GOST 21.5 1 21.5 - RATED VALUES: 10 A - 250 V - DIELECTRIC STRENGTH: 2 kV AC - AMBIENT TEMPERATURE: (-40...+70)C 94.34 55.32, 55.34 094.51 Approvals (according to type): GOST 55.33 Metal retaining clip 25.8 94.22 Relay type 7.5 22.5 94.32 94.33 94.34 51 94 Series - Sockets and Accessories for 55 Series Relays ACCESSORIES Sheet of marker tags for retaining clip 094.01 (72 tags): 6x12mm 060.72 PACKAGING CODES How to code and identify retaining clip and packaging options for sockets. Code options according to the last three letters: 55 9 4 .0 4 S M A A Standard packaging SM Metal retaining clip SP Plastic retaining clip SX No retaining clip 52 060.72