FWC18 Series 18 Watts Switch Mode Power Supply TECHNICAL SUPPORT High Efficiency wORLDwIDE 1-888-357-2280 saleselpac@iccus.com www.iccus.com Fully Regulated DC Output EUROPE +44.1383.432920 saleseurope@iccus.com Safety Approval - EN60950-1 Class I Lifetime Expectation >5 years Hold-up Time >12ms at full load ENERGY STAR Level V CEC Compliant 5-Year LIMITED warranty* ENERGY STAR PARTNER As a Global Supplier of Power Supplies, we are committed to meeting energy efficiency standards around the world. That is why we have partnered with the ENERGY STAR(R) Program and engineer our Elpac Power SystemsTM to meet strict energy-efficiency guidelines established by the EPA and the US Department of Energy (DOE). The Energy Star program has developed International partnerships with countries and organizations in major global markets. Those participating in the program include Australia, Canada, European Union, European Free Trade Association, Japan, New Zealand, and Taiwan. Furthering our International commitment, we have signed the EU Code of Conduct on Efficiency of External Power Supplies. Our Elpac Power SystemsTM FWC18 series meets the efficiency standards of the International ENERGY STAR(R) program and the EU Code of Conduct. A Input Output Input Voltage 85 - 264VAC 100 - 240VAC Nominal Output Voltage See Table Input Frequency 47 - 63Hz Total Regulation +/-5% Input Current <0.5A rms Minimum Load No minimum load required Inrush Current <37A at 230VAC cold start Start-Up Delay <1s Zero Load Power Consumption <0.5W Hold-Up Time >12ms at any input voltage <200A @ 132VAC @ 60Hz Ripple & Noise <1% pk-pk ** <350A @ 264VAC @ 60Hz Over Voltage Protection 110 - 135% Over Temperature Protection Active - Recoverable; plus Passive - Non Recoverable Over Current Protection 120 - 180% Short Circuit Protection Shutdown, auto-restart (hiccup mode) Touch Current/ Leakage Current Notes *visit www.iccus.com for complete details **Ripple and noise measured with 20MHz bandwidth; 10F tantalum capacitor in parallel with a 0.1F ceramic capacitor. FWC18 Series 18 Watts Switch Mode Power Supply Model Number Output Voltage Output Current Peak Current 1 Total Regulation 2 Typical Efficiency 3 FWC1805-760F 5.0V 3.6A 4.3A 5% 82% FWC1812-760F 12.0V 1.5A 1.8A 5% 83% FWC1815-760F 15.0V 1.2A 1.4A 5% 84% FWC1818-760F 18.0V 1.0A 1.2A 5% 85% FWC1824-760F 24.0V 0.8A 0.9A 5% 86% Notes 1) Maximum peak load (21W) lasting 500ms with a maximum 10% duty cycle. 2) Includes initial setting, line regulation, load regulation, and thermal drift. 3) Typical at 115VAC (including output cable). 4) All models ship standard with US version input cable. General Environmental EMC & Safety Efficiency Avg Efficiency 83.5% @ 115VAC; 81.6% @ 230VAC Operating Temperature 0 - 60C (Full load to 40C, derate linearly to 50% load at 60C) Emissions FCC class B, CISPR22 class B EN61000-3-2, -3 MTBF min. 100,000 hours demonstrated Storage Temperature -40C to +85C Immunity EN61000-4-2, -3, -4, -5, -6, -8, -11 Relative Humidity 5-95%, non-condensing Cooling Natural Convection Vibration All units production tested to 19.6m/s2 Size 3.35" (85.0mm) x 1.97" (50.0mm) x 1.30" (33.0mm) Weight 0.45 lbs (.20 kg) Input Configuration Standard Input Cable Connection on Power Supply Body Output Configuration 6 ft cable with US standard (Nema 5-15) 3 prong connector IEC 320 C14 Receptacle cTUVus Certified by: UL 60950-1 CAN/CSA-22.2 No.60950-1 CB per IEC60950-1 CE marked to LVD & EMC Directive Output Pin Assignments Standard Output Cable 6ft Connector (PSU side) Switchcraft 760 or equivalent Mating Connector Switchcraft 712A or equivalent Center Mechanical Drawing +V1 Rtn Outside Return Ordering Options Available (Contact Factory) Without input cable Floating output 3.40" [86.2mm] 3.35" [85.0mm] 1.97" [50.0mm] 1.30" [33.0mm] 1-888-357-2280 | saleselpac@iccus.com | www.iccus.com | 1562 Reynolds Avenue Irvine, CA 92614 +V