General Purpose Relays PCB Relays SCHRACK Power PCB Relay RPII/2 n2 n4 pole 8 A, 2 form C (CO) or 2 form A (NO) contacts kv/8 mm coil contact Applications Domestic appliances, UPS Z Coil Data Approvals VDE Cert. No. 40025448, UL E214025 Technical data of approved types on request Contact Data Contact configuration 2 form C (CO) or 2 form A (NO) Rated voltage / max.switching voltage AC 250 VAC Max. switching voltage 400 VAC Rated current 8 A (UL: 10A) Limiting making capacity, max 4 s, duty factor 10% 14 A Breaking capacity max. 2000 VA Contact material AgNi 90/10 AgNi0.15 gold flashed Frequency of operation with load 600 h-1 Frequency of operation without load DC-/REM-coil 36000/18000 h-1 Operate/release time typ. 9/3 ms Bounce time typ., form A/form B 2/3 ms Coil voltage range Operative range, IEC 61810 5 to 110VDC 2 Coil versions, DC coil Coil Rated Operate Release Coil Rated coil codevoltagevoltagevoltage resistancepower VDCVDCVDC 10%1)mW 0055 3.50.554500 0066 4.20.668500 01212 8.4 1.2270500 024 24 16.8 2.4 11001)500 048 48 33.6 4.8 44001)500 060 60 42.0 6.0 65401)500 11011077.011.0 231001)500 1) Coil resistance 15%. All figures are given for coil without pre-energization, at ambient temperature +20C. Other coil voltages on request. Contact ratings Type ContactLoad Cycles IEC61810 RP421 A (NO) 8A, 250 VAC, resistive, 35C 100x103 RP424 DC-coil A (NO) 8A, 250 VAC, resistive, 35C 100x103 RP424 DC-coil C (CO) 5A, 250 VAC, resistive, 70C 20x103 RP424 DC-coil A (NO) 8A, 250 VAC, resistive, 70C 30x103 RP424 REM A (NO) 8A, 250 VAC, resistive, 35C 50x103 UL508 RP421 C (CO) 8A, 250 VAC, gen. purp, 40C 6x103 RP424 A (NO) 10A, 250 VAC, gen. purp, 65C 30x103 RP424 C (CO) 8A, 250 VAC, gen. purp, 70C 6x103 Mechanical endurance DC-coil version: >20x106 operations REM/bistable version: >1x106 operations F0150-B Coil versions, REM I (1 coil bistable/remanence) Coil Rated Resistance Magnetisation range Demagnetisation range code voltage 15% MIN./ Vdc MAX./Vdc MIN./ Vdc MAX./Vdc VDC A12 12 115 9 18 3 4.8 A24 24 460 18 36 6 9.6 A48 48 1748 36 72 12 19.2 Coil versions, REM II (2 coil bistable/remanence) Coil Rated Resistance Magnetisation range Demagnetisation range code voltage 15% MIN./ Vdc MAX./Vdc MIN./ Vdc MAX./Vdc VDC F05 5 20 3.7 7.5 3.7 6 F12 12 105 9 18 9 14.4 F24 24 460 18 36 18 28.8 All figures are given for coil without pre-energization, at ambient temperature +20C. Other coil voltages on request. 07-2020, Rev. 0720 www.te.com (c) 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 1 General Purpose Relays PCB Relays SCHRACK Power PCB Relay RPII/2 (Continued) Insulation Initial dielectric strength coil-contact circuit open contact circuit adjacent contact circuits Clearance/creepage coil-contact circuit Material group of insulation parts PCB layout / terminal assignment 4000Vrms 1000Vrms 2500Vrms Bottom view on solder pins Dimensions in mm 8/8mm IIIa Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to +70C Category of environmental IEC 61810RTII - flux proof, RTIII - wash tight Vibration resistance (functional), form A/form B, 30 to 150Hz 11/1.5g Shock resistance (destructive) 100g Terminal type PCB-THT Resistance to soldering heat THT, IEC 60068-2-20 flux-proof version 270C / 10s wash-tight version 260C / 5s Relay weight 18g Packaging unit tube/20 pcs., box/500 pcs. S0163-CO 2 form C (CO) contacts S0163-BJ 2 form A (NO) contacts Dimensions Dimensions in mm S0163-BK 2 form C (CO) contacts (REM II version/ 2 coils) a) Indicated contact position while or after coil energization with reset voltage. b) for 2 coil version only S0273-AB monostable and REM I (REM II version has 3 coil terminals) Product code structure Typical product code RP 4 2 4 024 Type RP Power PCB Relay RPII/2 Version 4 8A, flux proof 8 8A, wash tight Contact arrangement 2 2 form C (2 CO) 4 2 form A (2 NO) Contact material 1 AgNi0.15 gold flashed 0 Discontinued: AgCdO2) Coil 4 AgNi 90/10 Coil code: please refer to coil versions table 2) AgCdO contacts are discontinued and replaced with AgNi contacts (see PCN E-18-003947) 2 07-2020, Rev. 0720 www.te.com (c) 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. General Purpose Relays PCB Relays SCHRACK Power PCB Relay RPII/2 (Continued) Product Code Version Contacts Cont. Material Coil Version Coil RP421012 RP421024 RP421110 RP821012 RP821024 RP424005 RP424006 RP424012 RP424024 RP424048 RP424060 RP424110 RP424A12 RP424A24 RP424A48 RP424F12 RP424F24 RP444012 RP444024 RP824006 RP824012 RP824024 RP824048 RP824060 RP844024 Flux proof 2 form C (CO) contacts AgNi0.15 monostable 12VDC 24VDC 110VDC 12VDC 24VDC 5VDC 6VDC 12VDC 24VDC 48VDC 60VDC 110VDC 12VDC 24VDC 48VDC 12VDC 24VDC 12VDC 24VDC 6VDC 12VDC 24VDC 48VDC 60VDC 24VDC Wash tight AgNi0.15 Flux proof AgNi 90/10 REM I REM II 2 form A (NO) contacts Wash tight monostable 2 form C (CO) contacts 2 form A (NO) contacts Part Number 6-1393234-7 6-1393234-8 7-1393234-1 1393845-4 1393845-5 6-1415546-2 6-1415546-3 6-1415546-4 6-1415546-5 6-1415546-6 6-1415546-7 6-1415546-8 6-1415546-9 7-1415546-0 7-1415546-1 7-1415546-2 7-1415546-3 7-1415546-4 7-1415546-5 7-1415546-6 7-1415546-7 7-1415546-8 7-1415546-9 8-1415546-0 6-1415546-1 Note. This list represents the most common types and does not show all variants covered by this datasheet. Other types on request. 07-2020, Rev. 0720 www.te.com (c) 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 3