ES1A THRU ES1D Surface Mount Efficient Fast Recovery Rectifier YENYO Voltage Range 50 to 200 V Current 1.0 Ampere Features Fast switching for high efficiency Low forward voltage drop High current capability Low reverse leakage current High surge current capability SMA/DO-214AC .065(1.65) .048(1.23) Mechanical Data Case: Molded plastic, SMA/DO-214AC Epoxy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end Mounting position: Any .114(2.90) .094(2.40) .181(4.60) .157(3.99) .012(.305) .006(.152) .098(2.50) .074(1.90) MAX .008(.203) .060(1.52) .030(0.75) .208(5.28) .188(4.80) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. PARAMETER SYMBOL ES1A ES1B ES1D UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 V Maximum RMS voltage VRMS 35 70 140 V Maximum DC blocking voltage VDC 50 100 200 V Maximum average forward rectified current @TL=110 IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A Maximum instantaneous forward voltage @ IF=1.0A VF 0.92 V Maximum DC reverse current at rated DC blocking voltage IR 5 100 A Maximum reverse recovery time (Note 1) trr 15 ns Typical thermal resistance from junction to ambient (Note 2) RJA 85 /W Typical thermal resistance from junction to lead (Note 2) RJL 35 /W TJ,TSTG -55 to +150 @TA=25 @TA=125 Operating junction and storage temperature range NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A. (2) Mounted on PCB with 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pad areas. DA116301C 1/2 R5, 10-Mar-2020 RATINGS AND CHARACTERISTICS CURVES ES1A THRU ES1D Fig.1 - Forward Current Derating Curve Fig.2 - Maximum Non-Repetitive Peak Forward Surge Current 30 Peak Forward Surge Current (A) Average Forward Current (A) 1.0 0.8 0.6 0.4 0.2 0 60 Hz Resistive or Inductive load 0 25 50 75 100 125 15 10 5 1 100 10 Number of Cycles at 60 Hz Fig.3 - Typical Instantaneous Forward Characteristics Fig.4 - Typical Reverse Leakage Characteristics 1000 Instantaneous Reverse Current (A) Instantaneous Forward Current (A) 20 Lead Temperature () 10 1 0.1 0.01 25 0 150 Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) TJ=25 Pulse Width=300s 0.4 0.6 0.8 1.0 1.2 1.4 1.6 100 TA=125 10 1 TA=25 0.1 0.01 1.8 Instantaneous Forward Voltage (V) 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) YENYO TECHNOLOGY CO., LTD. DA116301C 2/2 R5, 10-Mar-2020