R5, 10-Mar-20201 / 2DA116301C
YENYO
ES1A THRU ES1D
Surface Mount Efficient Fast Recovery Rectifier
Voltage Range 50 to 200 V
Current 1.0 Ampere
Dimensions in inches and (millimeters)
SMA/DO-214AC
PARAMETER UNITSYMBOL
VMaximum repetitive peak reverse voltage
VMaximum RMS voltage
VMaximum DC blocking voltage
1.0 A
Maximum average forward rectified current
@TL=110
30 A
Peak forward surge current 8.3 ms single
half sine-wave superimposed on rated load
V
Maximum instantaneous forward voltage
@ IF=1.0A
Mechanical Data
Case: Molded plastic, SMA/DO-214AC
Epoxy: UL 94V-0 rate flame retardant
Terminals: Solderable per MIL-STD-750,
method 2026
Polarity: Color band denotes cathode end
Mounting position: Any
VRRM
VRMS
VDC
IF(AV)
IFSM
VF
Maximum DC reverse current
at rated DC blocking voltage
Operating junction and storage temperature
range
IRμA
/W
5
100
NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A.
(2) Mounted on PCB with 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pad areas.
TJ,TSTG
@TA=25
@TA=125
-55 to +150
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25
ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RθJA 85
Typical thermal resistance from junction
to ambient (Note 2)
ES1D
200
140
200
ES1B
100
70
100
ES1A
50
35
50
/W
RθJL 35
Typical thermal resistance from junction
to lead (Note 2)
.157(3.99)
.181(4.60)
.006(.152)
.012(.305)
.094(2.40)
.114(2.90)
.048(1.23)
.065(1.65)
.074(1.90)
.098(2.50)
.188(4.80)
.208(5.28)
.030(0.75)
.060(1.52) MAX .008(.203)
trr
Maximum reverse recovery time (Note 1) ns
15
0.92
Features
Fast switching for high efficiency
Low forward voltage drop
High current capability
Low reverse leakage current
High surge current capability
2 / 2 R5, 10-Mar-2020
YENYO TECHNOLOGY CO., LTD.
DA116301C
RATINGS AND CHARACTERISTICS CURVES ES1A THRU ES1D
0.01
0.4
10
1.8
Instantaneous Forward Current (A)
Instantaneous Forward Voltage (V)
Fig.3 - Typical Instantaneous Forward
Characteristics
0.1
1
0.8 1.0
TJ=25
Pulse Width=300μs
1.2 1.40.6 1.6
0.01
0
1000
100
Instantaneous Reverse Current (μA)
Percent of Rated Peak Reverse Voltage (%)
Fig.4 - Typical Reverse Leakage
Characteristics
40
100
60 80
TA=25
10
20
TA=125
1
0.1
0
0
1.0
150
Average Forward Current (A)
Lead Temperature ()
Fig.1 - Forward Current Derating
Curve
25 50 75 100 125
0.8
0.6
60 Hz Resistive or
Inductive load
0.4
0.2
0
1
30
100
Peak Forward Surge Current (A)
Number of Cycles at 60 Hz
Fig.2 - Maximum Non-Repetitive Peak
Forward Surge Current
10
15
Pulse Width 8.3ms
Single Half-Sire-Wave
(JEDEC Method)
20
10
5
25