Tel: 315.478.0722 Fax: 315.479.6753 Email: info@logicalsys.com www.logicalsys.com 39
Simplify prototyping and testing
Use actual size prototype boards
Great for microcontrollers and EE/Flash memory testing
Simple design is easy to use
These plugs and socket boards are simple and easy to use following
this 3 step process.
1. Solder the SO-Plug to the prototype's SO land pattern.
Use your preferred soldering technique to attach the SO-Plug to the
board's land pattern.
Hand soldering tip. Select either a very fine tip or a large tip with sharp angles. The sharp angles exploit the solder's surface tension to
prevent solder bridges. Heat up the iron. Carefully align the plug on the land pattern. Solder the plug leads in opposite corners. Start at an
unsoldered end pin. Using the capillary action of the tip, sweep down the row of pins. Wet each pin with solder then use the iron to pull the
excess solder away from the pin.
2. Plug the DIP board onto the SO-Plug's header pins.
Note the pin one ends of the land pattern and the DIP Board. Align the SO-Plug's pins with the receptacles of the DIP Board.
Press together until the pins bottom out in the receptacle. Some SO-Plugs will leave exposed pin between the receptacle and
the SO-Plug’s insulator.
3. Plug the emulator or erasable device into the DIP board.
The DIP Board provides either a production socket or ZIF socket for access to the prototype. Plug the device or development
tool into the socket and start testing.
Product Selection
Use the Logical Systems cross reference to identify the correct SO-Plug for the SO device you are using. If your device is not in
the cross reference, compare your prototype’s land pattern to the recommended land patterns for each size plug. Select the Kit
or component packs that fit your needs from the list below. The cross reference also provides the recommended DIP pattern for
the device you are using. Confirm the DIP pin count and row spacing with your emulator or prototyping devices.
DIP to SO-Plug Prototyping Adapters
DIP to SO-Plug Prototyping Adapters
DIP to SO-Plug Prototyping Adapters
Tel: 315.478.0722 Fax: 315.479.6753 Email: info@logicalsys.com www.logicalsys.com
40
Part Numbers
Kits Part Number Format = PA-DSO-bbbb(Z)-Dwww-pp bbbb = board pincount + width
Kits contain 1 dip board and 2 so-plugs (Z) = optional ZIF socket
www = plug width
pp = plug pin count
8-20 pin
250 mil wide SO footprint
300 mil wide DIP board
8-20 pin
310 mil wide SO footprint
300 mil wide DIP board
8-28 pin
420 mil wide SO footprint
300 mil wide DIP board
20-32 pin
420 mil wide SO footprint
600 mil wide DIP board
PA-DSO-0803-D250-08/2 PA-DSO-0803-D310-08/2 PA-DSO-0803-D420-08/2 PA-DSO-2806(Z)-D420-20/2
PA-DSO-1603(Z)-D250-14/2 PA-DSO-1603(Z)-D310-14/2 PA-DSO-1603(Z)-D420-14/2 PA-DSO-2806(Z)-D420-24/2
PA-DSO-1603(Z)-D250-16/2 PA-DSO-1603(Z)-D310-16/2 PA-DSO-1603(Z)-D420-16/2 PA-DSO-2806(Z)-D420-28/2
PA-DSO-1803(Z)-D250-18/2 PA-DSO-1803(Z)-D310-18/2 PA-DSO-1803(Z)-D420-18/2 PA-DSO-3206(Z)-D420-32/2
PA-DSO-2003(Z)-D250-20/2 PA-DSO-2003(Z)-D310-20/2 PA-DSO-2003(Z)-D420-20/2
PA-DSO-2803(Z)-D420-20/2
PA-DSO-2803(Z)-D420-24/2
PA-DSO-2803(Z)-D420-28/2
24-28 pin 24-44 pin 24-28 pin 24-44 pin
470 mil wide SO footprint 470 mil wide SO footprint 560 mil wide SO footprint 560 mil wide SO footprint
300 mil wide board 600 mil wide board 300 mil wide board 600 mil wide board
PA-DSO-2803(Z)-D470-24/2 PA-DSO-2806(Z)-D470-24/2 PA-DSO-2803(Z)-D560-24/2 PA-DSO-2806(Z)-D560-24/2
PA-DSO-2803(Z)-D470-28/2 PA-DSO-2806(Z)-D470-28/2 PA-DSO-2803(Z)-D560-28/2 PA-DSO-2806(Z)-D560-28/2
PA-DSO-3206(Z)-D470-32/2 PA-DSO-3206(Z)-D560-32/2
PA-DSO-4406(Z)-D470-40/2 PA-DSO-4406(Z)-D560-40/2
PA-DSO-4406(Z)-D470-44/2 PA-DSO-4406(Z)-D560-44/2
28 pin 28-44 pin
630 mil wide SO footprint 630 mil wide SO footprint If the combination you want is not listed
300 mil wide board 600 mil wide board order the DIP Board & SO-Plugs separately.
PA-DSO-2803(Z)-D630-28/2 PA-DSO-2806(Z)-D630-28/2
PA-DSO-3206(Z)-D630-32/2 Other pin counts, lead spans and boards
PA-DSO-4406(Z)-D630-40/2 can be created to meet your needs.
PA-DSO-4406(Z)-D630-44/2 Contact us for pricing and availability.
SO-Plugs (packs of six) Part Number Format = PA-SOF-Dwww-pp (www = plug width & pp = pin count)
250 mil wide 310 mil wide 420 mil wide 470 mil wide 560 mil wide 630 mil wide
PA-SOF-D250-08 PA-SOF-D310-08 PA-SOF D420-08 PA-SOF-D470-24 PA-SOF-D560-24 PA-SOF-D630-28
PA-SOF-D250-14 PA-SOF-D310-14 PA-SOF D420-14 PA-SOF-D470-28 PA-SOF-D560-28 PA-SOF-D630-32
PA-SOF-D250-16 PA-SOF-D310-16 PA-SOF D420-16 PA-SOF-D470-32 PA-SOF-D560-32 PA-SOF-D630-40
PA-SOF-D250-18 PA-SOF-D310-18 PA-SOF D420-18 PA-SOF-D470-40 PA-SOF-D560-40 PA-SOF-D630-44
PA-SOF-D250-20 PA-SOF-D310-20 PA-SOF D420-20 PA-SOF-D470-44 PA-SOF-D560-44
PA-SOF-D310-24 PA-SOF D420-24
PA-SOF D420-28
PA-SOF D420-32
DIP Boards Part Number Format = PA-DSO-bbbb(Z) bbbb = board pincount + width (.3” or .6”)
(Z) = optional ZIF socket (16, 18 & 20 pin depopulated from 24 pin housing)
8-28 pin 300 mil wide boards 28-44 pin 600 mil wide boards
PA-DSO-0803 ZIF socket not available PA-DSO-2806
PA-DSO-1603 PA-DSO-2806Z with ZIF socket
PA-DSO-1603Z with ZIF socket (depopulated from 24 pin housing) PA-DSO-3206
PA-DSO-1803 PA-DSO-3206Z with ZIF socket
PA-DSO-1803Z with ZIF socket (depopulated from 24 pin housing) PA-DSO-4006
PA-DSO-2003 PA-DSO-4006Z with ZIF socket
PA-DSO-2003Z with ZIF socket (depopulated from 24 pin housing) PA-DSO-4406
PA-DSO-2803 PA-DSO-4406Z with ZIF socket
PA-DSO-2803Z with ZIF socket
DIP to SO-Plug Prototyping Adapters
Tel: 315.478.0722 Fax: 315.479.6753 Email: info@logicalsys.com www.logicalsys.com 41
Description Plug Dimensions PCB Footprints DIP Boards
lead span
0.250”
xx pins
8 - 20
Boards are available in sizes from
8-44 and in two widths with optional
ZIF (Z) sockets.
The board below is available in 8,
16, 18, 20, 24, and 28 pins.
Part number format =
PA-DSO-bbbb(Z)
lead span
0.310”
xx pins
8 - 24
lead span
0.420”
xx pins
8 - 40 The board below is available in 28,
32 and 44 pins.
Part number format =
PA-DSO-bbbb(Z)
lead span
0.470”
xx pins
24-44
lead span
0.560”
xx pins
24-44
lead span
0.630”
xx pins
28-44
Part Number Format = PA-SOF-Dwww-pp
DIP to SO-Plug Prototyping Adapters
DIP to SO-Plug Prototyping Adapters
