REVISIONS AP | DO NOT SCALE FROM THIS PRINT a (NO. OF POS. x .0787 [2.00])+.005 [.13] =} (SEE NOTE 7) ae HooWone Hoot Ho wb ye L mad Fig, 1 -01: THROUGH HOLE ee Comms a 1 ES ONE PLACE DECAMAL: -t .1 TWO PLACE DECMALS: a .01 FOUR PLACE DECIMALS = & .0020 LES CoE NORD i hE 2 mm pwo NO: , Man rac cous tt020 |#1* | SOCKET STRIP SHIH SMM1XXXXXXDXXXXXXX WITHDRAWAL FORCE TO BE: 0.5 oz MIN. 4.) @ REPRESENTS CRITICAL DIMS. FOR STATISTICAL CONTROL. PROCESS 5.) [J DIMS ARE IN METRIC AND ARE NOT CONTROLLING @.) -LC OPTION FOR A 02 POSITION WILL HAVE ONLY ONE LOCKING CUP (LC-05-T). 7.) END WALLS AFTER CUTTING SHOULD BE .017+.005. 8) FOR 01 LEAD STYLE, LAYER PACKAGE POSITIONS -01 THRU 04, 9.) FOR 02 LEAD STYLE WTHOUT PICK & PLACE PAD, LAYER PACKAGE POSITION 02 ONLY. 10.) -02 THRU O5 POSTION WITH K OR -P TO BE PACKAGED IN TR ONLY. 06 THRU 40 POSITION AVAILABLE IN TUBE OR TR PACKAGING. 12) NO FLAS! ALLOWED ti 12.) NO FLASH ALLOWED IN SOCKET OR EXTENDING BELOW LEADS. x: No OF POS x .0787 [2.00] + = ACR 304) /2}4.020 O15 REF: [38 FEF] | icc .020 REF PPPo3 [50 REF] ! Ovo a r (no, ecu To. oe 0787 i oe ie ce 7 OL ea) Fg, 2 02: SURFACE MOUNT -P: PICK AND PLACE PAD (PLACE PPP03 ABOUT C.L. AS SHOWN) (SEE NOTE 10) mer one raat = eel SMM-XX-D-S XX 1875 ce x w= aa sore | ot 902% (TYP) yj a [203 RF] 440 REF .2165:.0050 [5.500.127] DIA [see Aer] if et NOTE: "R = USED MEASURED DIMENSION (REF) | | tae *s" = {("R .2165 [5.50] / 2} +.020 [.51] ay = 2 WAX SWAY. c-s6-02-x~J FIG, 4 (nr) LE-O5-TM (SEE -LC OPTION) K: POLYAMIDE FILM PAD Sa ore [2 POSITION MINIMUM, SEE NOTE 10] .0304.010 [.75+.25] ~ .