TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com - High Reliability controlled devices - Unidirectional (A) and Bidirectional (CA) construction - Selections for 7.0 to 200 V standoff voltages (VWM) - Fast response SURFACE MOUNT 15,000 W Transient Voltage Suppressor DEVICES MPLAD15KP7.0A thru MPLAD15KP200CA, e3 LEVELS M, MA, MX, MXL FEATURES High reliability controlled devices with wafer fabrication and assembly lot traceability 100 % surge tested devices Low profile surface mount Optional up screening available by replacing the M prefix with MA, MX or MXL. These prefixes specify various screening and conformance inspection options based on MIL-PRF-19500. Refer to MicroNote 129 for more details on the screening options Suppresses transients up to 15,000 W @ 10/1000 s (see Figure 1) Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B RoHS compliant devices available by adding an "e3" suffix 3 lot norm screening performed on Standby Current ID APPLICATIONS / BENEFITS Protection from switching transients and induced RF Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4 Secondary lightning protection per IEC 61000-4-5 with 42 Ohms source impedance: o Class 1,2,3,4,5: MPLAD15KP7.0A to 200CA Secondary lightning protection per IEC 61000-4-5 with 12 Ohms source impedance: o Class 1,2,3,4: MPLAD15KP7.0A to 200CA Secondary lightning protection per IEC 61000-4-5 with 2 Ohms source impedance: o Class 2,3: MPLAD15KP7.0A to 200CA o Class 4: MPLAD15KP5.0 to 54CA Pin injection protection per RTCA/DO-160D for Waveform 4 (6.4/69 s): o Level 4: MPLAD15KP7.0A to 200CA o Level 5: MPLAD15KP7.0A to 100CA Pin injection protection per RTCA/DO-160D for Waveform 5A (40/120 s): o Level 4: MPLAD15KP7.0A to 28CA MAXIMUM RATINGS Peak Pulse Power dissipation at 25 C: 15,000 watts at 10/1000 s (also see Figures 1 and 2) with impulse repetition rate (duty factor) of 0.05% or less tclamping (0 volts to VBR min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional Operating and Storage temperature: -55 C to +150 C Thermal resistance: 0.2 C/W junction to case or 50 C/W junction to ambient when mounted on FR4 PC board with recommended mounting pad (see page 2) Steady-State Power dissipation: 50 watts at TC = 100 C with good heat sink, or 2.5 watts at TA = 25 C if mounted on FR4 PC board as described for thermal resistance Forward Surge Voltage: 3.5 V maximum @ 500 Amps 8.3 ms half-sine wave (unidirectional devices only) Solder temperatures: 260 C for 10 s (maximum) RF01004 Rev C, November 2010 High Reliability Product Group Page 1 of 4 _____ TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com ______________________________________________________________________________________________________________________________ MECHANICAL AND PACKAGING CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 TERMINALS: Tin-Lead (90 % Sn, 10 % Pb) or RoHS (100 % Sn) Compliant annealed matte-Tin plating readily solderable per MIL-STD-750, method 2026 MARKING: Body marked with part number POLARITY: For unidirectional devices, the cathode is on the metal backside (package bottom) Available in bulk or custom tape-and-reel packaging TAPE-AND-REEL: Standard per EIA-481-B (add "TR" suffix to part number) WEIGHT: 1 gram (approximately) PACKAGE AND MOUNTING PAD DIMENSIONS Inches [mm] POLARITY SYMBOL (FOR UNIDIRECTIONAL DEVICES ONLY) SYMBOLS & DEFINITIONS Symbol VWM PPP VBR ID Definition Symbol Working Peak (Standoff) Voltage Peak Pulse Power Breakdown Voltage Standby Current RF01004 Rev C, November 2010 IPP VC IBR Definition Peak Pulse Current Clamping Voltage Breakdown Current for VBR High Reliability Product Group Page 2 of 4 _____ TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com ______________________________________________________________________________________________________________________________ ELECTRICAL CHARACTERISTICS @ 25oC MICROSEMI PART NUMBER (Note 2) REVERSE STAND-OFF VOLTAGE VWM (Note 1) VOLTS MPLAD15KP7.0A MPLAD15KP7.5A MPLAD15KP8.0A MPLAD15KP8.5A MPLAD15KP9.0A MPLAD15KP10A MPLAD15KP11A MPLAD15KP12A MPLAD15KP13A MPLAD15KP14A MPLAD15KP15A MPLAD15KP16A MPLAD15KP17A MPLAD15KP18A MPLAD15KP20A MPLAD15KP22A MPLAD15KP24A MPLAD15KP26A MPLAD15KP28A MPLAD15KP30A MPLAD15KP33A MPLAD15KP36A MPLAD15KP40A MPLAD15KP43A MPLAD15KP45A MPLAD15KP48A MPLAD15KP51A MPLAD15KP54A MPLAD15KP58A MPLAD15KP60A MPLAD15KP64A MPLAD15KP70A MPLAD15KP75A MPLAD15KP78A MPLAD15KP85A MPLAD15KP90A MPLAD15KP100A MPLAD15KP110A MPLAD15KP120A MPLAD15KP130A MPLAD15KP150A MPLAD15KP160A MPLAD15KP170A MPLAD15KP180A MPLAD15KP200A MPLAD15KP7.0CA MPLAD15KP7.5CA MPLAD15KP8.0CA MPLAD15KP8.5CA MPLAD15KP9.0CA MPLAD15KP10CA MPLAD15KP11CA MPLAD15KP12CA MPLAD15KP13CA MPLAD15KP14CA MPLAD15KP15CA MPLAD15KP16CA MPLAD15KP17CA MPLAD15KP18CA MPLAD15KP20CA MPLAD15KP22CA MPLAD15KP24CA MPLAD15KP26CA MPLAD15KP28CA MPLAD15KP30CA MPLAD15KP33CA MPLAD15KP36CA MPLAD15KP40CA MPLAD15KP43CA MPLAD15KP45CA MPLAD15KP48CA MPLAD15KP51CA MPLAD15KP54CA MPLAD15KP58CA MPLAD15KP60CA MPLAD15KP64CA MPLAD15KP70CA MPLAD15KP75CA MPLAD15KP78CA MPLAD15KP85CA MPLAD15KP90CA MPLAD15KP100CA MPLAD15KP110CA MPLAD15KP120CA MPLAD15KP130CA MPLAD15KP150CA MPLAD15KP160CA MPLAD15KP170CA MPLAD15KP180CA MPLAD15KP200CA 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 180 200 MAXIMUM CLAMPING VOLTAGE BREAKDOWN VOLTAGE VC @ IPP ID @ VWM VBR @ IBR VOLTS 7.78 - 8.60 8.33 - 9.21 8.89 - 9.83 9.44 - 10.4 10.0 - 11.1 11.1 - 12.3 12.2 - 13.5 13.3 - 14.7 14.4 - 15.9 15.6 - 17.2 16.7 - 18.5 17.8 - 19.7 18.9 - 20.9 20.0 - 22.1 22.2 - 24.5 24.4 - 26.9 26.7 - 29.5 28.9 - 31.9 31.1 - 34.4 33.3 - 36.8 36.7 - 40.6 40.0 - 44.2 44.4 - 49.1 47.8 - 52.8 50.0 - 55.3 53.3 - 58.9 56.7 - 62.7 60.0 - 66.3 64.4 - 71.2 66.7 - 73.7 71.1 - 78.6 77.8 - 86.0 83.3 - 92.1 86.7 - 95.8 94.4 - 104.0 100 - 111 111 - 123 122 - 135 133 - 147 144 - 159 167 - 185 178 - 197 189 - 209 200 - 221 222 - 245 MAXIMUM STANDBY CURRENT MAXIMUM PEAK PULSE CURRENT IPP (FIG. 3) MAXIMUM TEMPERATURE COEFFICIENT OF VBR (V(BR)) mA 150 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 VOLTS A A 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.5 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113 121 126 137 146 162 177 193 209 243 259 275 291 322 3000 750 450 150 60 45 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 1251 1164 1101 1041 975 882 822 753 696 645 318 576 543 516 462 423 384 357 330 309 282 258 234 216 207 195 183 171 159 156 147 132 123 120 108 102 93 84 78 71 62 58 55 52 47 mV/ C 5.0 6.0 6.0 7.0 8.0 9.0 10 11 12 13 15 16 18 19 22 24 27 29 30 35 38 40 45 49 51 55 60 64 69 70 75 84 90 94 102 109 122 132 145 157 183 195 207 219 243 NOTE 1: Transient Voltage Suppressors are normally selected with reverse "Stand Off Voltage" VWM, which should be equal to or greater than the dc or continuous peak operating voltage level NOTE 2: For bidirectional construction, indicate a CA suffix after the part number NOTE 3: Items listed in Bold above are available ex-stock or with a short lead-time RF01004 Rev C, November 2010 High Reliability Product Group Page 3 of 4 _____ TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com ______________________________________________________________________________________________________________________________ PPP Peak Pulse Power - kW GRAPHS tp - Pulse Time - sec Peak Pulse Power (PPP) or continuous Power in Percent of 25C Rating FIGURE 1 Peak Pulse Power vs. Pulse Time to 50 % of Exponentially Decaying Pulse Test waveform parameters: tr = 10 s, tp = 1000 s FIGURE 2 : Pulse Waveform RF01004 Rev C, November 2010 TL Lead Temperature C FIGURE 3: Derating Curve High Reliability Product Group Page 4 of 4