xppower.com Specification Ripple Current Input Reverse Voltage Protection Input Filter * Nominal 10%(3) * 20 mA pk-pk through 12 H, 5 Hz to 20 MHz * SIP or DIP Package * 3000 VDC Isolation * Optional 4000 & 6000 VDC Isolation * 40 C to +85 C Operation * MTBF >1.1 MHrs * 3 Year Warranty No Load Input Current Output Voltage Output Current Efficiency Model Number(1,2) 30 mA 3.3 V 300 mA 75% IV0503SA 30 mA 5.0 V 200 mA 78% IV0505SA 30 mA 9.0 V 112 mA 75% IV0509SA 30 mA 12.0 V 84 mA 76% IV0512SA 30 mA 15.0 V 66 mA 76% IV0515SA 30 mA 24.0 V 42 mA 72% IV0524SA 20 mA 3.3 V 300 mA 74% IV1203SA 20 mA 5.0 V 200 mA 74% IV1205SA 20 mA 9.0 V 112 mA 75% IV1209SA 20 mA 12.0 V 84 mA 77% IV1212SA 20 mA 15.0 V 66 mA 78% IV1215SA 20 mA 24.0 V 42 mA 75% IV1224SA 10 mA 3.3 V 300 mA 75% IV2403SA 10 mA 5.0 V 200 mA 77% IV2405SA 10 mA 9.0 V 112 mA 75% IV2409SA 10 mA 12.0 V 84 mA 78% IV2412SA 10 mA 15.0 V 66 mA 78% IV2415SA 10 mA 24.0 V 42 mA 78% IV2424SA 6 mA 3.3 V 300 mA 72% IV4803SA 6 mA 5.0 V 200 mA 72% IV4805SA 6 mA 9.0 V 112 mA 74% IV4809SA 6 mA 12.0 V 84 mA 75% IV4812SA 6 mA 15.0 V 66 mA 75% IV4815SA 6 mA 24.0 V 42 mA 70% IV4824SA 5 VDC * None * Capacitor 12 VDC Output Output Voltage Minimum Load Line Regulation Load Regulation Single & Dual Output Input Voltage(3) Input Input Voltage Range Input Reflected * * * * * Setpoint Accuracy * Ripple & Noise * Temperature Coefficient * Maximum Capacitive * Load See table None(4) 1.2%/1% Vin 10% 20-100% load change (3.3 V models 20%) 3% 75 mV pk-pk max, 20 MHz bandwidth 0.02%/C Dual: 100 F, Single: 220 F 24 VDC 48 VDC General Efficiency Isolation Voltage Isolation Resistance Isolation Capacitance Switching Frequency MTBF * * * * * * See table 3000 VDC(6) 109 60 pF typical Variable, 80 KHz typical >1.1 MHrs to MIL-HDBK-217F at 25 C, GB Mechanical Details SIP Package * * * * -40 C to +85 C -40 C to +125 C 100 C max Convection-cooled Notes 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. For dual output, delete suffix `A', and split current equally between rails. For DIP package, replace `S' in part number with `D'. For 48 V nominal input, a 4.7-47 F capacitor is required across the input. Operation at no load will not damage unit but it may not meet all specifications. 48 V model dimension is 0.28 (7.20). For 4000 VDC Isolation, add suffix '-H4'. For 6000 VDC Isolation, add suffix '-H6'. All dimensions in inches (mm). Pin pitch tolerance: 0.014 (0.35) Case tolerance: 0.02 (0.5) Weight: SIP 0.006 lbs (2.6 g), DIP 0.005 lbs (2.3 g) 0.80 (20.3) 0.76 (19.50) Environmental Operating Temperature Storage Temperature Case Temperature Cooling DIP Package 0.02 (0.5) 0.12 (3.0) 0.24 (6.0) (5) 0.40 (10.2) 0.37 (9.5) 0.27 (6.9) 0.02 (0.5) 0.10 (2.5) 0.40 (10.16) 0.01 (0.2) Single Output 0.40 (10.16) -Vin +Vin +Vin -Vin -Vout +Vout 0.60 (15.24) 0.01 (0.2) 0.12 (3.0) +Vin -Vin 0.05 (1.2) 0.01 (0.2) Dual Output -Vout 0V +Vout 0.05 (1.2) 0.01 (0.2) 0.30 (7.6) +Vout 0.60 (15.24) -Vin +Vin 0.60 (15.24) NC -Vout NC -Vout 0V +Vout 0.30 (7.6) 0.60 (15.24) 13-Dec-11 DCDC 1 Watt IV Series