Product data sheet Automation technology - data transmission and power supply Product description M18 female cable connector, Contacts: 4, 6.5 - 8.0 mm, unshielded, screw clamp, IP67 Area Order number M18 series 714 09 0440 10 04 Illustration Scale drawing Contact arrangement (Plug-in side) You can find the component part drawing and assembly instructions on the next page. Technical data General features Order number Connector design Version Connector locking system Termination Degree of protection Cross-sectional area Cable outlet Temperature range from/to Mechanical operation Weight (g) Customs tariff number Material 09 0440 10 04 female cable connector connector female straight screw screw clamp IP67 1.50 mm / AWG 16 6.5 - 8.0 mm -25 C / 85 C > 50 Mating cycles 24.327 85369010 Contact material Contact plating Locking material REACH SVHC PBT/PA PA (UL94 V-0) / PBT (UL94 V-0) CuZn (brass) CuSnZn (Optalloy) PA CAS 96-45-7 (Imidazolidine-2-thione ) CAS 7439-92-1 (Lead) Classifications eCl@ss 11.1 ETIM 7.0 Electrical parameters Rated voltage Rated impulse voltage Rated current (40 C) Insulation resistance Pollution degree Overvoltage category Insulating material group EMC compliance Housing material Contact body material 27-44-01-09 EC003569 250 V 4000 V 16 A / cUR 5 A > 10 3 III III unshielded Date: 2020-11-17 - Page 1 of 3 Product data sheet Automation technology - data transmission and power supply Product description M18 female cable connector, Contacts: 4, 6.5 - 8.0 mm, unshielded, screw clamp, IP67 Area Order number M18 series 714 09 0440 10 04 Component part drawing Assembly instructions / Panel cut-out Date: 2020-11-17 - Page 2 of 3 Powered by TCPDF (www.tcpdf.org) Product data sheet Automation technology - data transmission and power supply Product description M18 female cable connector, Contacts: 4, 6.5 - 8.0 mm, unshielded, screw clamp, IP67 Area Order number M18 series 714 09 0440 10 04 Security notices The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application. To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1). Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards. Plug connectors with enclosure protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the plug connectors must be protected separately against corrosion. For further information on the IP protection classes, please refer to the "Technical Information" download centre. To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm). Date: 2020-11-17 - Page 3 of 3