Product data sheet
Automation technology - data transmission and
power supply
Product description M18 female cable connector, Contacts: 4, 6.5 - 8.0 mm, unshielded, screw clamp, IP67
Area M18 series 714
Order number 09 0440 10 04
Illustration Scale drawing Contact arrangement (Plug-in side)
You can find the component part drawing and assembly instructions on the next
page.
Technical data
General features
Order number 09 0440 10 04
Connector design female cable connector
Version connector female
straight
Connector locking system screw
Termination screw clamp
Degree of protection IP67
Cross-sectional area 1.50 mm² / AWG 16
Cable outlet 6.5 - 8.0 mm
Temperature range from/to -25 °C / 85 °C
Mechanical operation > 50 Mating cycles
Weight (g) 24.327
Customs tariff number 85369010
Electrical parameters
Rated voltage 250 V
Rated impulse voltage 4000 V
Rated current (40 °C) 16 A / cUR 5 A
Insulation resistance > 10⁸ Ω
Pollution degree 3
Overvoltage category III
Insulating material group III
EMC compliance unshielded
Material
Housing material PBT/PA
Contact body material PA (UL94 V-0) / PBT
(UL94 V-0)
Contact material CuZn (brass)
Contact plating CuSnZn (Optalloy)
Locking material PA
REACH SVHC CAS 96-45-7
(Imidazolidine-2-thione
)
CAS 7439-92-1 (Lead)
Classifications
eCl@ss 11.1 27-44-01-09
ETIM 7.0 EC003569
Date: 2020-11-17 - Page 1 of 3
Product data sheet
Automation technology - data transmission and
power supply
Product description M18 female cable connector, Contacts: 4, 6.5 - 8.0 mm, unshielded, screw clamp, IP67
Area M18 series 714
Order number 09 0440 10 04
Component part drawing
Assembly instructions / Panel cut-out
Date: 2020-11-17 - Page 2 of 3
Product data sheet
Automation technology - data transmission and
power supply
Product description M18 female cable connector, Contacts: 4, 6.5 - 8.0 mm, unshielded, screw clamp, IP67
Area M18 series 714
Order number 09 0440 10 04
Security notices
The connector must not be plugged or unplugged under load. Non-observance and improper use can
result in personal injury.
The connectors have been developed for applications in plant engineering, control and electrical
equipment construction. The user is responsible for checking whether the connectors can also be used
in other areas of application.
To protect against unintentional opening of the connector, the thread between the housing and the
connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with
voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits
according to IEC 61140 (EN 61140, VDE 0140-1).
Connectors which are used in circuits with voltages dangerous to the touch may only be installed and
used by, or under the supervision of, persons with electrical engineering training, taking into account
the applicable regulations and standards.
Plug connectors with enclosure protection IP 67 and IP 68 are not suitable for use under water. When
used outdoors, the plug connectors must be protected separately against corrosion. For further
information on the IP protection classes, please refer to the "Technical Information" download centre.
To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight"
(approx. 50 cNm).
Powered by TCPDF (www.tcpdf.org)
Date: 2020-11-17 - Page 3 of 3
