Solderless terminals LOCKING SPADE TONGUE (LS type) Non-insulated E oD o d1 T F L oD B d2 od1 Brazed seam File No.: E42024 Stud size Applicable Wire AWG#(mm2) American Metric 22 to 16 (0.25 to 1.65) 16 to 14 (1.04 to 2.63) 12 to 10 (2.63 to 6.64) Part No. Standard d2 Dimensions mm (in.) L F 6 3.5 1.25-3.5LS 3.7 (.146) B 6.4 (.252) 13.6 (.535) 5.9 (.232) 8 4 1.25-4LS 4.3 (.169) 7.1 (.280) 16.0 (.630) 7.2 (.283) 10 5 1.25-5LS 5.3 (.209) 8.4 (.331) 17.0 (.669) 8.2 (.323) 6 3.5 2-3.5LS 3.7 (.146) 6.4 (.252) 14.0 (.551) 6.3 (.248) 8 4 2-4LS 4.3 (.169) 7.1 (.280) 16.0 (.630) 7.4 (.291) 10 5 2-5LS 5.3 (.209) 8.4 (.331) 17.0 (.669) 8.4 (.331) 6 3.5 5.5-3.5LS 3.7 (.146) 7.9 (.311) 18.2 (.717) 7.1 (.280) 8 4 5.5-4LS 4.3 (.169) 7.9 (.311) 18.2 (.717) 7.1 (.280) 10 5 5.5-5LS 5.3 (.209) 8.4 (.331) 18.2 (.717) 7.1 (.280) E T Tool No. Qty/box 4.8 (.189) 3.3 1.9 0.7 (.130) (.075) (.028) YHT-2210 YA-1 YA-2 YA-4 BCT-0514 1,000 4.8 (.189) 4.0 2.3 0.8 (.157) (.091) (.031) YHT-2210 YA-1 YA-2 YA-4 BCT-0514 1,000 6.8 (.268) 5.5 3.6 0.9 (.217) (.142) (.035) YHT-2210 YA-1 YA-2 YA-4 BCT-0514 500 Note:1) The part numbers indicated in the above table are for products with a brazed seam. 2) Delivery lead times may vary depending on the product. Contact JST for details. Solderless terminals B d2 oD LOCKING SPADE TONGUE (LS type) Vinyl-insulated (funnel-entry) F T L File No.: Applicable Wire AWG#(mm2) 22 to 16 *(0.25 to 1.65) 16 to 14 (1.04 to 2.63) 12 to 10 (2.63 to 6.64) E42024 Stud size American 6 Metric 3.5 8 4 10 Part No. Standard Dimensions mm (in.) FVL1.25-3.5LS d2 3.7 (.146) B 6.4 (.252) L 18.2 (.717) F 5.9 (.232) FVL1.25-4LS 4.3 (.169) 7.1 (.280) 20.6 (.811) 7.2 (.283) 5 FVL1.25-5LS 5.3 (.209) 8.4 (.331) 21.6 (.850) 8.2 (.323) 6 3.5 FVL2-3.5LS 3.7 (.146) 6.4 (.252) 18.6 (.732) 6.3 (.248) 8 4 FVL2-4LS 4.3 (.169) 7.1 (.280) 20.6 (.811) 7.4 (.291) 10 5 FVL2-5LS 5.3 (.209) 8.4 (.331) 21.6 (.850) 8.4 (.331) 6 3.5 FVL5.5-3.5LS 3.7 (.146) 7.9 (.311) 25.2 (.992) 7.1 (.280) 8 4 FVL5.5-4LS 4.3 (.169) 7.9 (.311) 25.2 (.992) 7.1 (.280) 10 5 FVL5.5-5LS 5.3 (.209) 8.4 (.331) 25.2 (.992) 7.1 (.280) Note:1) The part numbers indicated in the above table are for products with a brazed seam. 2) *The crimping will be more secure if the total cross-sectional area of the wire is at least 0.5 mm2. Examples: If the cross-sectional area of the wire is 0.3mm2, fold the wire in two when crimping the terminal. If the cross-sectional area of the wire is 0.5mm2, crimp the terminal onto the wire as it is. 3) Delivery lead times may vary depending on the product. Contact JST for details. 39 oD T Color Tool No. Qty/box 4.0 9.4 0.7 (.370) (.157) (.028) Red YNT-2216 YA-1 YA-2 YA-4 BCT-0514 1,000 4.5 9.4 0.8 (.370) (.177) (.031) Blue YNT-1614 YA-1 YA-2 YA-4 BCT-0514 1,000 0.9 13.8 6.8 Yellow (.543) (.268) (.035) YNT-1210S YA-4 BCT-0514 500 Solderless terminals B d2 oD LOCKING SPADE TONGUE (LS type) Nylon-insulated with copper sleeve F T L File No.: Applicable Wire AWG#(mm2) 22 to 16 (0.25 to 1.65) 16 to 14 (1.04 to 2.63) 12 to 10 (2.63 to 6.64) E42024 Stud size American 6 Metric 3.5 8 4 10 Part No. Standard Dimensions mm (in.) FND1.25-3.5LS d2 3.7 (.146) B 6.4 (.252) L 18.4 (.724) F 5.9 (.232) FND1.25-4LS 4.3 (.169) 7.1 (.280) 20.8 (.819) 7.2 (.283) 5 FND1.25-5LS 5.3 (.209) 8.4 (.331) 21.8 (.858) 8.2 (.323) 6 3.5 FND2-3.5LS 3.7 (.146) 6.4 (.252) 18.8 (.740) 6.3 (.248) 8 4 FND2-4LS 4.3 (.169) 7.1 (.280) 20.8 (.819) 7.4 (.291) 10 5 FND2-5LS 5.3 (.209) 8.4 (.331) 21.8 (.858) 8.4 (.331) 6 3.5 FND5.5-3.5LS 3.7 (.146) 7.9 (.311) 25.4(1.000) 7.1 (.280) 8 4 FND5.5-4LS 4.3 (.169) 7.9 (.311) 25.4(1.000) 7.1 (.280) 10 5 FND5.5-5LS 5.3 (.209) 8.4 (.331) 25.4(1.000) 7.1 (.280) oD T Color Tool No. Qty/box 4.0 9.6 0.7 (.378) (.157) (.028) Red YNT-2216 YA-1 YA-2 YA-4 BCT-0514 1,000 4.7 9.6 0.8 (.378) (.185) (.031) Blue YNT-1614 YA-1 YA-2 YA-4 BCT-0514 1,000 YNT-1210S 14.0 0.9 6.5 Yellow YA-4 (.551) (.256) (.035) BCT-0514 500 Note:1) The part numbers indicated in the above table are for products with a brazed seam. 2) Delivery lead times may vary depending on the product. Contact JST for details. 40