ZM4728A-GS08 - Vishay Semiconductors

ZM4728A to ZM4764A

www.vishay.com Vishay Semiconductors

Rev. 1.5, 17-Oct-12 1Document Number: 85786

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Zener Diodes

FEATURES

• Silicon planar power Zener diodes

• For use in stablilizing and clipping circuits with

high power rating

• Standard Zener voltage tolerance is ± 5 %

• These diodes are also available in the DO-41

case with type designation 1N4728A to 1N4764A

• AEC-Q101 qualified

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

PRIMARY CHARACTERISTICS

PARAMETER VALUE UNIT

VZ range nom. 3.3 to 100 V

Test current IZT 2.5 to 76 mA

VZ specification Thermal

equilibrium

Int. construction Single

ORDERING INFORMATION

DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER

QUANTITY

ZM4728A to ZM4764A ZM4728A to ZM4764A-series-GS18 5 000 (12 mm tape on 13" reel) 10 000/box

ZM4728A to ZM4764A ZM4728A to ZM4764A-series-GS08 1 500 (12 mm tape on 7" reel) 12 000/box

PACKAGE

PACKAGE NAME WEIGHT MOLDING COMPOUND

FLAMMABILITY RATING

MOISTURE SENSITIVITY

LEVEL SOLDERING CONDITIONS

MELF DO-213AB (glass) 135 mg UL 94 V-0 MSL level 1

(according J-STD-020) 260 °C/10 s at terminals

ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

Power dissipation Valid provided that electrodes are kept at

ambient temperature Ptot 1000 mW

Zener current See table “Characteristics”

Junction to ambient air Valid provided that electrodes are kept at

ambient temperature RthJA 170 K/W

Junction temperature Tj175 °C

Storage temperature range Tstg - 65 to + 175 °C

ZM4728A to ZM4764A

www.vishay.com Vishay Semiconductors

Rev. 1.5, 17-Oct-12 2Document Number: 85786

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

(1) The Zener impedance is derived from the 1 kHz AC voltage which results when an AC current having an RMS value equal to 10 % of the

zener current (IZT1 or IZT2) is superimposed on IZT1 or IZT2. Zener impedance is measured at two points to insure a sharp knee on the

breakdown curve and to eliminate unstable units

(2) Valid provided that electrodes are kept at ambient temperature

(3) Measured under thermal equilibrium and DC test conditions

(4) Width of the test pulse is 8.3 ms

ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PART NUMBER

ZENER

VOLTAGE

RANGE (3)

TEST

CURRENT

REVERSE

LEAKAGE

CURRENT

DYNAMIC

RESISTANCE (1)

f = 1 kHz

SURGE

CURRENT (4)

REGULATOR

CURRENT (2)

VZ at IZT1 IZT1 IZT2 IR at VRZZ at IZT1 ZZK at IZT2 IZSM IZM

VmA μA VmA mA

NOM. MAX. MAX. MAX. MAX.

ZM4728A 3.3 76 1 100 1 10 400 1380 276

ZM4729A 3.6 69 1 100 1 10 400 1260 252

ZM4730A 3.9 64 1 50 1 9 400 1190 234

ZM4731A 4.3 58 1 10 1 9 400 1070 217

ZM4732A 4.7 53 1 10 1 8 500 970 193

ZM4733A 5.1 49 1 10 1 7 550 890 178

ZM4734A 5.6 45 1 10 2 5 600 810 162

ZM4735A 6.2 41 1 10 3 2 700 730 146

ZM4736A 6.8 37 1 10 4 3.5 700 660 133

ZM4737A 7.5 34 0.5 10 5 4 700 605 121

ZM4738A 8.2 31 0.5 10 6 4.5 700 550 110

ZM4739A 9.1 28 0.5 10 7 5 700 500 100

ZM4740A 10 25 0.25 10 7.6 7 700 454 91

ZM4741A 11 23 0.25 5 8.4 8 700 414 83

ZM4742A 12 21 0.25 5 9.1 9 700 380 76

ZM4743A 13 19 0.25 5 9.9 10 700 344 69

ZM4744A 15 17 0.25 5 11.4 14 700 304 61

ZM4745A 16 15.5 0.25 5 12.2 16 700 285 57

ZM4746A 18 14 0.25 5 13.7 20 750 250 50

ZM4747A 20 12.5 0.25 5 15.2 22 750 225 45

ZM4748A 22 11.5 0.25 5 16.7 23 750 205 41

ZM4749A 24 10.5 0.25 5 18.2 25 750 190 38

ZM4750A 27 9.5 0.25 5 20.6 35 750 170 34

ZM4751A 30 8.5 0.25 5 22.8 40 1000 150 30

ZM4752A 33 7.5 0.25 5 25.1 45 1000 135 27

ZM4753A 36 7 0.25 5 27.4 50 1000 125 25

ZM4754A 39 6.5 0.25 5 29.7 60 1000 115 23

ZM4755A 43 6 0.25 5 32.7 70 1500 110 22

ZM4756A 47 5.5 0.25 5 35.8 80 1500 95 19

ZM4757A 51 5 0.25 5 38.8 95 1500 90 18

ZM4758A 56 4.5 0.25 5 42.6 110 2000 80 16

ZM4759A 62 4 0.25 5 47.1 125 2000 70 14

ZM4760A 68 3.7 0.25 5 51.7 150 2000 65 13

ZM4761A 75 3.3 0.25 5 56 175 2000 60 12

ZM4762A 82 3 0.25 5 62.2 200 3000 55 11

ZM4763A 91 2.8 0.25 5 69.2 250 3000 50 10

ZM4764A 100 2.5 0.25 5 76 350 3000 45 9

ZM4728A to ZM4764A

www.vishay.com Vishay Semiconductors

Rev. 1.5, 17-Oct-12 3Document Number: 85786

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

Fig. 1 - Admissible Power Dissipation vs. Ambient Temperature

PACKAGE DIMENSIONS in millimeters (inches): MELF DO-213AB (glass)

18289

1.0

0.8

0.6

0.4

0.2

00100

200 °C

amb

tot

18317

Foot print recommendation:

The gap between plug and glass can

be either on cathode or anode side

Cathode identification

4.00 (0.157)

max.

1.25 (0.049)

min.

ref.

6.50 (0.256)

2.6 (0.102)

2.4 (0.094)

0.55 (0.022)

5.2 (0.205)

4.8 (0.189)

3.00 (0.118)

min.

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Vishay:

ZM4751A-GS18 ZM4751A-GS08 ZM4731A-GS08 ZM4748A-GS08 ZM4752A-GS08 ZM4749A-GS08 ZM4750A-

GS08 ZM4742A-GS08 ZM4739A-GS08 ZM4747A-GS08 ZM4743A-GS08 ZM4733A-GS08 ZM4734A-GS08

ZM4735A-GS08 ZM4738A-GS08 ZM4740A-GS08 ZM4744A-GS08 ZM4752A-GS18 ZM4758A-GS18 ZM4747A-

GS18 ZM4741A-GS08 ZM4746A-GS08 ZM4737A-GS08 ZM4732A-GS08 ZM4745A-GS08 ZM4730A-GS08

ZM4736A-GS08 ZM4728A-GS08 ZM4729A-GS08 ZM4753A-GS08 ZM4754A-GS08 ZM4755A-GS08 ZM4756A-

GS08 ZM4757A-GS08 ZM4758A-GS08 ZM4759A-GS08 ZM4760A-GS08 ZM4761A-GS08 ZM4762A-GS08

ZM4763A-GS08 ZM4764A-GS08 ZM4728A-GS18 ZM4729A-GS18 ZM4730A-GS18 ZM4731A-GS18 ZM4732A-

GS18 ZM4733A-GS18 ZM4734A-GS18 ZM4735A-GS18 ZM4736A-GS18 ZM4737A-GS18 ZM4738A-GS18

ZM4739A-GS18 ZM4740A-GS18 ZM4741A-GS18 ZM4742A-GS18 ZM4743A-GS18 ZM4744A-GS18 ZM4745A-

GS18 ZM4746A-GS18 ZM4748A-GS18 ZM4749A-GS18 ZM4750A-GS18 ZM4753A-GS18 ZM4754A-GS18

ZM4755A-GS18 ZM4756A-GS18 ZM4757A-GS18 ZM4759A-GS18 ZM4760A-GS18 ZM4761A-GS18 ZM4762A-

GS18 ZM4763A-GS18 ZM4764A-GS18