CX Series
• SIP SSR
• Ratings o f 5A @ 660 VA C
• SCR output for heavy industrial loads
• AC or DC control
• Zero-crossing (resistive loads) or random-fire (inductive loads) output
•
CE Compliant to EN60950-1
PRODUCT SELECTION
Control Voltage 5 A 5 A 5 A
3-15 VDC CX240D5
4-15 VDC CX380D5 CX480D5
15-32 VDC CXE240D5 CXE380D5 CXE480D5
18-36 VAC CXE240A5
90-140 VAC CX240A5
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description CX240x5 CX380x5 CX480x5
Operating Voltage (47-63Hz) [Vrms] 12-280 48-530 48-660
Transient Overvoltage [Vpk] 600 1200 1200
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 0.1 0.1 0.1
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) 500 500 500
Maximum Load Current [Arms] 5 5 5
Minimum Load Current [Arms] 0.06 0.06 0.06
Maximum Surge Current (16.6ms) [Apk] 250 250 250
Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.4 1.4 1.4
Maximum I²t for fusing (8.3 msec) [A² sec] 260 260 260
Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5
INPUT SPECIFICATIONS (1)
Description CX240Dx CX380/480Dx CXExxxDx CX240A5 CXE240A5
Nominal Voltage 5 VDC 5 VDC 24 VDC 120 VAC 24 VAC
Control Voltage Range 3-15 VDC 4-15 VDC 15-32 VDC 90-140 VAC 18-36 VAC
Minimum T urn -On Voltage 3.0 VDC 4.0 VDC 15.0 VDC 90.0 Vrms 18.0 Vrms
Drop Out Voltage 1.0 VDC 1.0 VDC 1.0 VDC 10.0 Vrms 2.0 Vrms
Typical Input Current 15 mAdc 15 mAdc 15 mAd c 10 mArm s 10 mArm s
Nominal Input Impedance 300 Ohm 240 Ohm 1500 Ohm 14.1K O hm 2.1K Ohm
Maximum Turn-On Time [msec] (3) 1/2 Cycle 1/2 Cycle 1/2 Cycle 10 10
Maximum Turn-Off Time [msec] 1/2 Cycle 1/2 Cycle 1/2 Cycle 40 40
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms
Minimum Insulation Resistance (@ 500 VDC) 10 9 Ohm
Maximum Capacitance, Input/Output 10 pF
Ambient Operating Temperature Range -30 to 80 °C
Ambient Storage Temperature Range -30 to 125 °C
Weight (typical) 0.4 oz. (11g)
Encapsulation Therminally Conductive Epoxy
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Off-Stat e dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
3) Turn-On time for random turn-on versions is 0. 1 msec (DC Control Models).
WIRING DIAGRAM
MECHANICAL SPECIFICATIONS
THERMAL DERATE INFORMATION
AGENCY APPROVALS
Designed in accordance with the requirements of IEC 62314
CE EN60950 : Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7:
E116949 LR81689 70938 (240 V, 380V, DC Control Only)
Rev. 111511
ANNEX - ENVIROMENTAL INFORMATION
