SMD Wire-wound Chip Inductors ctparts.com
Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids
800-684-5322 Inside US 949-453-1811 Outside US
Copyright © 2003 by CT Magnetics, DBA Central Technologies. All rights reser ved.
CT Magnetics reserves the right to make improvements or change specifications without notice
12.14.01
PHYSICAL DIMENSIONS
PAD LAYOUT
Size A B C D E F
Max. Max. Max.
mm 2.55 2.38 2.1 2 0.5 1.43
inches 0.1 0.09 0.08 0.08 0.02 0.06
SPECIFICATIONS
Please specify tolerance code when ordering.
CT1008HS-330_ G = ±2%, J = ±5%, K = ±10%, M = ±20%
* M also (all other values are G, J, K only)
L T est Q Q T est SRF DCR Rated
Part Inductance Freq. Fact. Freq. Min. Max. DC
Number (nH) (MHz) Min. (MHz) (MHz) (Ω
Ω) (mA)
CT1008HS-100_* 10 50 60 500 4100 .05 1000
CT1008HS-120_* 12 50 60 500 3300 .09 1000
CT1008HS-150_* 15 50 60 500 2500 .13 1000
CT1008HS-180_* 18 50 60 350 2500 .08 1000
CT1008HS-220_* 22 50 60 350 2400 .13 1000
CT1008HS-270_ 27 50 65 350 1600 .12 1000
CT1008HS-330_* 33 50 65 350 1600 .14 1000
CT1008HS-390_* 39 50 65 350 1500 .15 1000
CT1008HS-470_ 47 50 68 350 1500 .16 1000
CT1008HS-560_ 56 50 68 350 1300 .18 1000
CT1008HS-680_ 68 50 68 350 1300 .21 1000
CT1008HS-820_ 82 50 68 350 1200 .22 1000
CT1008HS-101_ 100 25 62 350 1000 .35 750
CT1008HS-121_ 120 25 62 350 950 .38 750
CT1008HS-151_ 150 25 46 100 850 .40 750
CT1008HS-181_ 180 25 48 100 750 .42 750
CT1008HS-221_ 220 25 48 100 700 .54 600
CT1008HS-271_ 270 25 48 100 600 .50 600
CT1008HS-331_ 330 25 48 100 570 .70 550
CT1008HS-391_ 390 25 48 100 500 .72 550
CT1008HS-471_ 470 25 48 100 450 .95 520
CT1008HS-561_ 560 25 48 100 415 1.2 420
CT1008HS-621_ 620 25 48 100 375 1.3 320
CT1008HS-681_ 680 25 48 100 375 1.4 400
CT1008HS-751_ 750 25 48 100 360 1.5 370
CT1008HS-821_ 820 25 48 100 350 1.5 400
CT1008HS-911_ 910 25 48 50 330 2.0 350
CT1008HS-102_ 1000 25 44 50 310 2.1 340
CT1008HS Series
From 10 nH to 1,000 nH
Not shown at actual size.
CHARACTERISTICS
Description: SMD ceramic core wire-wound chip inductor
Applications: LC resonant circuits such as oscillator and signal
generators, impedance matching, circuit isolation, RF filters, disk
drives and computer peripherals, audio and video equipment, TV,
radio and telecommunication equipment
Operating T emperature: -40°C to +125°C
Inductance T olerance: ±2%, ±5%, ±10%, ±20%
Testing: Inductance and Q are tested on an HP4286A or
HP4287A at specified frequency
Packaging: Tape & Reel
Marking: Reels are marked with inductance code and tolerance
Coated: Epoxy resin on top of the part to per manently set the coil
Miscellaneous: Par ts are also available with a clear plastic cap.
Other values available
Additional Information: Additional electrical & physical
information available upon request
Samples available. See website for ordering information.