High Precision (0.01 %/10 ppm/°C)
Conformal Coating Sil Resistor
CNS 020
Vishay Sfernice
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 60051
84 Revision: 25-Aug-09
SCHEMATIC
FEATURES
Tight TCR to 5 ppm/°C
Incorporates high stability thin film element
(0.1 % at + 70 °C at Pn during 1000 h)
Through hole (Sil)
100 Ω to 10 MΩ
Tight tolerance down to 0.01 %
Compliant to RoHS directive 2002/95/0EC
TYPICAL PERFORMANCE
Note
(1) 15 ppm/°C for R 1.5M
DIMENSIONS AND IMPRINTING
CNS 020
In clear: Model, Vishay logo and manufacturing code
On back: Ohmic value (in Ω), tolerance (in %)
** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902
ABS
TCR 5 ppm/°C
ABS
TOL. 0.01 %
STANDARD ELECTRICAL SPECIFICATIONS
TEST SPECIFICATIONS CONDITIONS
MATERIAL PASSIVATED NICHROME
Resistance range 100 Ω (minimum) to 10 MΩ (maximum)
Absolute TCR
Standard (1) ± 10 ppm/°C - 40 °C to + 125 °C
On request ± 5 ppm/°C 0 °C to + 70 °C
Tolerance: Absolute ± 0.01 % to ± 1 %
Power rating
0.5 W at + 70 °C
0.3 W at + 125 °C
Working voltage (maximum) 300 V
Operating temperature range - 55 °C to + 155 °C
B
A
E
D
C
F
G
DIMENSION INCHES MILLIMETERS
A 0.318 8.10
B 0.260 6.62
C 0.020 0.51
D 0.200 5.08
E 0.120 3.17
F 0.100 2.54
G 0.010 0.25
CNS 020
High Precision (0.01 %/10 ppm/°C)
Conformal Coating Sil Resistor Vishay Sfernice
Document Number: 60051 For technical questions, contact: sfer@vishay.com www.vishay.com
Revision: 25-Aug-09 85
ENVIRONMENTAL TEST
TEST
REQUIREMENTS
CONDITIONS
NFC 83220
CECC40300
MIL-PRF
55182E
DRIFTS
(max.)
Overload ± 0.01 % ± 0.05 % 0.01 % 2.5 Un/5 s
Umax. < 2 Un
Temperature cycling ± 0.01 % ± 0.05 % 0.01 % - 55 °C/+ 155 °C 5 cycles
CEI 63-2-14 Test No
Terminal strength ± 0.01 % ± 0.02 % 0.01 % CEI 68-2-21
Test Ua (pulling), Ub (bending), Uc (twisting)
Resistance to solder heat ± 0.01 % ± 0.02 % 0.01 % + 260 °C/10 s, CEI 68-2-20A
Test T6 (Met 1A)
Vibration ± 0.01 % ± 0.02 % 0.01 % 10 Hz to 500 Hz
10 g, 6 h Met B4; CEI 68-2-6 Test Fc
Climatic sequence
± 0.05 %
insulation resistance
> 102 MΩ
- 0.05 %
- 55 °C/+ 155 °C 6 cycles 95 % RH
RH 85 mbar
CEI68-1
Moisture
± 0.05 %
insulation resistance
> 102 MΩ
- 0.02 %
56 days 95 % RH
+ 40 °C
CEI 68-2-3
High temperature storage ± 0.05 % - 0.05 % 1000 h/+ 155 °C
CEI 68-2-20A; Test B
MECHANICAL SPECIFICATIONS
Resistive material Nichrome
Substrate material Alumina
Terminals Tin/silver on Cu alloy
Protection Conformal epoxy coating
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CNS020-301KF (preferred part number format)
GLOBAL MODEL VALUE TOLERANCE
CNS 020 Decimal: R, K or ML = ± 0.01 %
P = ± 0.02 %
W = ± 0.05 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1.0 %
Historical Part Number example: CNS 020 301K 1 % (will continue to be accepted)
CNS 020 301K 1 %
HISTORICAL MODEL VALUE TOLERANCE
CNS 0 2 0 - 3 0 1KF
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.