PR1001G/L - PR1007G/L 1.0A FAST RECOVERY GLASS PASSIVATED RECTIFIER SPICE MODELS: PR1001G PR1002G PR1003G PR1004G PR1005G PR1006G PR1007G Features * * * * * * * Glass Passivated Die Construction Diffused Junction Fast Switching for High Efficiency High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 30A Peak Low Reverse Leakage Current Plastic Material: UL Flammability Classification Rating 94V-0 B A A C D DO-41 Plastic Mechanical Data * * * * * * Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number DO-41 Weight: 0.35 grams (approx.) A-405 Weight: 0.20 grams (approx.) A-405 Dim Min Max Min A 25.40 3/4 25.40 Max 3/4 B 4.06 5.21 4.10 5.20 C 0.71 0.864 0.53 0.64 D 2.00 2.72 2.00 2.70 All Dimensions in mm "GL" Suffix Designates A-405 Package "G" Suffix Designates DO-41 Package Maximum Ratings and Electrical Characteristics @ TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. PR1002 PR1003 PR1004 PR1005 PR1006 PR1007 Unit Symbol PR1001 G/GL G/GL G/GL G/GL G/GL G/GL G/GL Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TA = 55C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Drop Peak Reverse Current at Rated DC Blocking Voltage @ IF = 1.0A @ TA = 25C @ TA = 100C VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 1.0 A IFSM 30 A VFM 1.3 V IRM 5.0 50 mA Reverse Recovery Time (Note 3) trr 150 Typical Junction Capacitance (Note 2) Cj 15 Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: 250 500 8 ns pF RqJA 95 K/W Tj, TSTG -65 to +150 C 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. DS27001 Rev. D1-2 1 of 2 www.diodes.com PR1001G/L - PR1007G/L a Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FWD RECTIFIED CURRENT (A) 1.0 0.8 0.6 0.4 0.2 Single phase half-wave 60 Hz resistive or inductive load 0 25 75 50 100 125 150 175 200 10 1.0 0.1 0.01 0.6 TA, AMBIENT TEMPERATURE (C) Fig. 1 Forward Derating Curve 1.0 1.2 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 30 100 Pulse Width 8.3ms Single Half-Sine-Wave (JEDEC Method) Tj = 25C f = 1.0MHz Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 0.8 20 10 0 PR1001 - PR1004 10 PR1005 - PR1007 1 1 10 1 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance 100 trr +0.5A Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) Oscilloscope (Note 1) -0.25A (+) -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS27001 Rev. D1-2 2 of 2 www.diodes.com PR1001G/L - PR1007G/L