• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and prod uct information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
1
Cascadable Thin Film Amplifier,
13 dB Gain, 5 - 1000 MHz
Rev. V4
AM-176 / AMC-176
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Features
• 4.0 dB Typical Noise Figure
• 13.5 dBm Typical Midband 1 dB Compression
• 1.25:1 Typical VSWR
Description
M/A-COM’s AM-176 is a fe edback amplifier with high
intercept and compression points. This amplifier is
packaged in a TO-8 package. Due to the internal
power dissipation the thermal rise should be
minimized. The ground plane on the PC board
should be configured to remove heat from under the
package. AM-176 is ideally suited for use where a
high intercept, high reliability amplifier is requi red.
TO-8-1
Parameter Absolute Maximum
Max. Input Power +10 dBm
Vbias +15.75 V
Operating Temperature -55°C to +85°C
Storage Temperature -65°C to +125°C
Absolute Maximum Ratings 1
1. Operation of this device above any one of these parameters
may cause permanent damage.
Ordering Information
Part Number Package
AM-176 PIN TO-8-1
AMC-176 SMA Connectorized
Outline Drawing: SMA Connectorized *
∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified.