PD2401
AC Solid State Relays
www.ixysic.com
DS-PD2401-R15 1
INTEGRATED CIRCUITS DIVISION
Part # Description
PD2401 4-Pin (16-Pin Body) DIP Package (25/Tube)
Parameter Rating Units
AC Operating Voltage 240 Vrms
Load Current 1 Arms
On-State Voltage Drop
(IL=1Arms)
1.2 Vrms
Applications
Features
Description
Ordering Information
Pin Configuration
Programmable Control
Process Control
Power Control Panels
Remote Switching
Gas Pump Electronics
Contactors
Large Relays
Solenoids
Motors
Heaters
Load Current up to 1Arms
Blocking Voltages up to 500VP
3750Vrms Input to Output Isolation
5mA Sensitivity
Zero-Crossing Detection
DC Control, AC Output
Low EMI and RFI Generation
High Noise Immunity
VDE compatible
Flammability Rating UL 94 V-0
The PD2401 is an AC Solid State Switch using optical
coupling with dual power SCR outputs to produce an
alternative to optocoupler and Triac circuits. The
PD2401 switches are robust enough to provide a
blocking voltage of up to 500VP and max surge
current rating of 20A. In addition, tightly controlled
zero-cross circuitry ensures switching of AC loads
without the generation of transients. The input and
output circuits are optically coupled to provide
3750Vrms of isolation and noise immunity between
control and load circuits. As a result the PD2401
is well suited for industrial environments where
electromagnetic interference would disrupt the
operation of electromechanical relays.
Approvals
UL Recognized Component: UL 508 File E69938
CSA Certified Component: File 043639
16
1
10
+ LED
AC Load
- LED
AC Load
8
ZC
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
2R15
PD2401
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Typical values are characteristic of the device at +25°C,
and are the result of engineering evaluations. They are
provided for information purposes only, and are not part of
the manufacturing testing requirements.
Absolute Maximum Ratings @ 25ºC
Parameter Min Max Units
Blocking Voltage - 500 VP
Reverse Input Voltage - 5 V
Input Control Current - 100 mA
Peak (10ms) - 1 A
Input Power Dissipation 1- 150 mW
Total Package Dissipation 2- 1600 mW
Isolation Voltage, Input to Output 3750 - Vrms
Operational Temperature -40 +85 ºC
Storage Temperature -40 +125 ºC
1 Derate linearly 1.33 mW / ºC
2 Derate linearly 16.6 mW / ºC
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics
AC Operating Voltage IF=5mA VOP 20 - 240 Vrms
Load Current (Continuous) VL=120-240VAC IL0.005 - 1 Arms
Maximum Surge Current t<16ms IPEAK - - 20 A
Off-State Leakage Current VL=500VDC ILEAK --1mA
On-State Voltage Drop IL=1.0Arms - - - 1.2 Vrms
Critical Rate of Rise - dV/dt 1000 1200 - V/µs
Switching Speeds
Turn-On IF=5mA ton - - 0.5 Cycles
Turn-Off toff - - 0.5
Zero-Cross Turn-On Voltage 11st half-cycle --25V
Subsequent half-cycle - - 1 V
Operating Frequency - - 20 - 500 Hz
Load Power Factor for Guaranteed Turn-On 2- PF 0.25 - - -
Capacitance Input-To-Output VIO=0V, f=1MHz CIO -3 -pF
Input Characteristics
Input Control Current
For Normal Environment - IF
--5
mA
For High Noise Environment - - - 10
Input Voltage Drop IF=5mA VF0.9 1.2 1.5 V
Input Dropout Voltage - - 0.8 - - V
Reverse Input Current VR=5V IR- - 10 µA
1 Zero Cross 1st half-cycle @ < 100Hz.
2 Snubber circuits may be required at low power factors.
Electrical Characteristics @ 25ºC
INTEGRATED CIRCUITS DIVISION
PD2401
www.ixysic.com 3
R15
-40
1.2
1.0
0.8
0.6
0.4
0.2
05585
0
Ambient Temperature (ºC)
Load Current, Free Air
RTJA=60ºC/W
Load Current (Arms)
20
15
10
5
0
16 50 100
25
Max. Surge Current (Non-Repetitive)
Pulse Duration (ms)
Peak Surge Current (A)
NOTE: Values apply to
TJ=50ºC before Surge
0
1.3
1.2
1.1
1.0
10 25 40 55 70 85
0.9
Forward Voltage (V)
Ambient Temperature (ºC)
Typical Forward Voltage
vs. Temperature
Critical Rate of Rise (V/µs)
0
800
600
400
200
1200
1000
25 50 85
1400
0
Ambient Temperature (ºC)
Typical dV/dt vs. Temperature
Vo
63%
10%
RC
dV/dt Method
In accordance with
EIA/NARM Standards
RS-443 for Solid State Relays
Vo = 300V
dV
dt
0.63 x 300V
RC RC
189
==
PERFORMANCE DATA*
*Unless otherwise noted, data presented in these graphs is typical of device operation at 25ºC.
For guaranteed parameters not indicated in the written specifications, please contact our application department.
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
4R15
PD2401
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits classifies its plastic encapsulated devices for moisture sensitivity according to the latest version of
the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of
our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices
when handled according to the limitations and information in that standard as well as to any limitations set forth in the
information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) classification as shown below, and should be handled
according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device Moisture Sensitivity Level (MSL) Classifi cation
PD2401 MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Soldering Profile
Provided in the table below is the Classification Temperature (TC) of this product and the maximum dwell time the
body temperature of this device may be (TC - 5)ºC or greater. The classification temperature sets the Maximum
Body Temperature allowed for this device during lead-free reflow processes. For through-hole devices, and any other
processes, the guidelines of J-STD-020 must be observed.
Device Classifi cation Temperature (Tc) Dwell Time (tp) Max Refl ow Cycles
PD2401 245ºC 30 seconds 1
Board Wash
IXYS Integrated Circuits recommends the use of no-clean flux formulations. Board washing to reduce or remove flux
residue following the solder reflow process is acceptable provided proper precautions are taken to prevent damage
to the device. These precautions include, but are not limited to: using a low pressure wash and providing a follow
up bake cycle sufficient to remove any moisture trapped within the device due to the washing process. Due to the
variability of the wash parameters used to clean the board, determination of the bake temperature and duration
necessary to remove the moisture trapped within the package is the responsibility of the user (assembler). Cleaning
or drying methods that employ ultrasonic energy may damage the device and should not be used. Additionally, the
device must not be exposed to flux or solvents that are Chlorine- or Fluorine-based.
INTEGRATED CIRCUITS DIVISION
Specification: DS-PD2401-R15
©Copyright 2018, IXYS Integrated Circuits
All rights reserved. Printed in USA.
6/27/2018
For additional information please visit our website at: www.ixysic.com
5
PD2401
IXYS Integrated Circuits makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes
to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits'
Standard Terms and Conditions of Sale, IXYS Integrated Circuits assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but
not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits' product may result in direct physical harm, injury, or death to a person or severe property
or environmental damage. IXYS Integrated Circuits reserves the right to discontinue or make changes to its products at any time without notice.
Dimensions
mm
(inches)
PCB Hole Pattern
7.620 ± 0.254
(0.300 ± 0.010)
9.144 ± 0.508
(0.360 ± 0.020)
0.254 TYP
(0.010 TYP)
7.239 TYP
(0.285 TYP)
6.350 ± 0.127
(0.250 ± 0.005)
19.202 ± 0.381
(0.756 ± 0.015)
17.780 ± 0.127
(0.700 ± 0.005)
15.240 ± 0.127
(0.600 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
2.540 ± 0.127
(0.100 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
4.064 TYP
(0.160 TYP)
Pin 1
Pin 16
0.559 ± 0.102
(0.022 ± 0.004)
Pin 1
Pin 16
17.780
(0.700)
15.240
(0.600)
7.620
(0.300)
0.800 DIA x 4
(0.031 DIA x 4)
PD2401
Mechanical Dimensions