LITE-ON SEMICONDUCTOR MBR3030PTL thru 3060PTL REVERSE VOLTAGE - 30 to 60 Volts FORWARD CURRENT - 30 Amperes SCHOTTKY BARRIER RECTIFIERS TO-3P FEATURES Metal of silicon rectifier,majority carrier conducton Guard ring for transient protection Low power loss, high efficiency High current capability, low VF High surge capacity Plastic package has UL flammability classification 94V-0 For use in low voltage,high frequency inverters,free whelling,and polarity protection applications F E A P G Q O K PIN 2 1 B 3 D H MECHANICAL DATA C I Case : TO-3P molded plastic Polarity : As marked on the body Weight : 0.2 ounces, 5.6 grams Mounting position : Any Max. mounting torque = 0.5 N.m (5.1 Kgf.cm) N J L M L PIN 1 PIN 2 CASE PIN 3 DIM. A B C D E F G H I J K L M N O P Q TO-3P MIN. MAX. 15.75 16.25 21.25 21.75 20.10 19.60 3.78 4.38 1.88 2.08 4.87 5.13 4.4TYP. 1.90 2.16 2.93 3.22 1.12 1.22 2.90 3.20 5.20 5.70 2.10 2.40 0.76 0.51 2.18 1.93 20 TYP 10 TYP All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBOL CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (See Fig.1) VRRM VRMS VDC MBR 3030PTL 30 MBR 3035PTL 35 21 30 24.5 35 MBR MBR 3045PTL 3050PTL 45 50 MBR 3040PTL 40 28 31.5 45 40 MBR 3060PTL UNIT 60 42 60 V V V 35 50 I(AV) 30 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load IFSM 200 A Voltage Rate of Change (Rated VR) dv/dt 10000 V/us Maximum Forward Voltage (Note 1) @TC=110 C IF =15A @ IF =15A @ IF =30A @ IF =30A @ Maximum DC Reverse Current at Rated DC Blocking Voltage TJ =25 C TJ =125 C TJ =25 C TJ =125 C @TJ =25 C @TJ =125 C Typical Thermal Resistance (Note 2) VF 0.57 0.80 0.72 IR 1 60 0.85 0.75 1.05 0.90 5 100 V mA R0JC 5 C/W CJ 600 pF Operating Temperature Range TJ -55 to +150 C Storage Temperature Range TSTG -55 to +175 C REV. 4, Oct -2010, KTHD23 Typical Junction Capacitance per element (Note 3) NOTES : 1. 300us Pulse Width, 2% Duty Cycle. 2. Thermal Resistance Junction to Case. 3. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. AVERAGE FORWARD CURRENT AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE 40 30 20 10 RESISTIVE OR INDUCTIVE LOAD 0 50 25 75 100 125 150 PEAK FORWARD SURGE CURRENT, AMPERES RATING AND CHARACTERISTIC CURVES MBR3030PTL thru MBR3060PTL FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 200 150 100 50 8.3ms Single Half-Sine-Wave 1 175 2 5 CASE TEMPERATURE , C 50 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL REVERSE CHARACTERISTICS FIG.4 - TYPICAL FORWARD CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT ,(A) 100 TJ = 125 C 10 TJ = 75 C 1.0 0.1 TJ = 25 C 0.01 MBR3030PTL~ MBR3045PTL 10 MBR3050PTL ~ MBR3060PTL 1.0 TJ = 25 C PULSE WIDTH 300us 300ua 0.1 0 20 40 60 80 100 140 120 0.1 0.2 0.3 0.4 FIG.5 - TYPICAL JUNCTION CAPACITANCE 10000 1000 100 10 TJ = 25 C, f= 1MHz 1 0.1 0.5 0.6 0.7 0.8 0.9 INSTANTANEOUS FORWARD VOLTAGE , VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE ,(%) CAPACITANCE , (pF) INSTANTANEOUS REVERSE CURRENT ,(mA) 20 10 1 10 REVERSE VOLTAGE , VOLTS 100 1.0 Legal Disclaimer Notice MBR3030PTL thru MBR3060PTL Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.