ID100 ID101 MONOLITHIC DUAL PICO AMPERE DIODES FEATURES DIRECT REPLACEMENT FOR INTERSIL ID100 & ID101 REVERSE LEAKAGE CURRENT IR = 0.1pA REVERSE BREAKDOWN VOLTAGE BVR 30V ID100 ID101 Crss = 0.75pF TO-78 TOP VIEW TO-71 TOP VIEW REVERSE CAPACITANCE ABSOLUTE MAXIMUM RATINGS 1 @ 25 C (unless otherwise stated) Maximum Temperatures Storage Temperature -65 to +150 C Operating Junction Temperature -55 to +150 C Maximum Power Dissipation @ TA = + 25 Continuous Power Dissipation 300mW Maximum Currents Forward Current 20mA Reverse Current 100A Maximum Voltages Reverse Voltage 30V Diode to Diode Voltage 50V ELECTRICAL CHARACTERISTICS @ 25 C (unless otherwise stated) SYMBOL BVR CHARACTERISTIC MIN Reverse Breakdown Voltage 30 VF Forward Voltage 0.8 IR Reverse Leakage Current TYP MAX 1.1 UNITS V 0.1 2.0 |IR1-IR2| Differential Leakage Current Crss Total Reverse Capacitance 0.75 IR = 1A IF = 10mA VR = 1V 10 pA 3 2 CONDITIONS 1 pF VR = 10V VR = 10V, f = 1MHz Figure 1. Operational Amplifier Protection Input Differential Voltage limited to 0.8V (typ) by Diodes ID100 D1 and D2. Common Mode Input voltage limited by Diodes ID100 D3 and D4 to 15V. Figure 2. Sample and Hold Circuit Typical Sample and Hold circuit with clipping. ID100 diodes reduce offset voltages fed capacitively from the ID100 switch gate. FIGURE 1 Linear Integrated Systems FIGURE 2 * 4042 Clipper Court * Fremont, CA 94538 * Tel: 510 490-9160 * Fax: 510 353-0261 Doc 20117 6/15/2013 Rev#A3 ECN# ID100 ID101 0.210 0.170 1. Absolute maximum ratings are limiting values above which serviceability may be impaired. 2. Design reference only, not 100% tested. 3. Pins 3 & 5 on ID100 and ID101 must not be connected, in any fashion or manner, to any circuit or node. Information furnished by Linear Integrated Systems is believed to be accurate and reliable. However, no responsibility is assumed for its use; nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Linear Integrated Systems. Linear Integrated Systems (LIS) is a 25-year-old, third-generation precision semiconductor company providing high-quality discrete components. Expertise brought to LIS is based on processes and products developed at Amelco, Union Carbide, Intersil and Micro Power Systems by company President John H. Hall. Hall, a protege of Silicon Valley legend Dr. Jean Hoerni, was the director of IC Development at Union Carbide, co-founder and vice president of R&D at Intersil, and founder/president of Micro Power Systems. Linear Integrated Systems * 4042 Clipper Court * Fremont, CA 94538 * Tel: 510 490-9160 * Fax: 510 353-0261 Doc 20117 6/15/2013 Rev#A3 ECN# ID100 ID101