Product information ELST 412 FA Industrial Connecting Solutions:Archive - Industrial Connectors:Circular Connectors E-series M12 / M12 push-pull (Archive):with screw locking:Appliance socket for front panel mounting (circuit board):ELST 412 FA http://e-catalog.hirschmann.com/link/57078-24228-62529-24256-24257-24274-36836/en/conf/uistate Name ELST 412 FA Appliance connector for flange mounting, with flat gasket Delivery informations Availability no longer available Product description Description Appliance connector for flange mounting, with flat gasket Type ELST 412 FA Order No. 932 328-206 Type of contact male Number of contacts 4 Standard IEC 61076-2-101 (Ed. 1)/ IEC 60947-5-2 Housing Color grey Technical data Pin dimensions 1 mm Rated voltage AC/DC 150 V Rated current 4A Type of termination solder, hollow pins Suitable cables max. 0.5 mm 2 Material Contact material Cu Zn Contact surface material Sn Contact bearer material PA Housing material PA O-Ring NBR Environmental conditions Protection class (IEC 60529) IP 68 Pollution severity 3 Temperature range -25 C to +90 C Inflammability class Contact bearer 94 V-2 Approvals UL UL Packing unit Packaging unit 100 pieces Scope of delivery and accessories Accessories to order separately Belden Deutschland GmbH protective cap M12 VS, order no. 734 209-100 www.beldensolutions.com 18-08-2014 Page 1 of 2 Industrial Connecting Solutions:Archive - Industrial Connectors:Circular Connectors E-series M12 / M12 push-pull (Archive):with screw locking:Appliance socket for front panel mounting (circuit board):ELST 412 FA http://e-catalog.hirschmann.com/link/57078-24228-62529-24256-24257-24274-36836/en/conf/uistate Picture Drawing Belden Deutschland GmbH Im Gewerbepark 2 58579 Schalksmuhle Germany Phone: +49 7127/14-1806 E-Mail: icos-sales@belden.com The information published in the websites has been compiled as carefully as possible. It is subject to alteration without notice in technical as well as in price-related/commercial respect. The complete information and data were available on user documentation. Mandatory information can only be obtained by a concrete query. Belden Deutschland GmbH www.beldensolutions.com 18-08-2014 Page 2 of 2