Ordering number:ENN2960 NPN Triple Diffused Planar Silicon Transistor 2SC4002 High-Voltage Driver Applications Features Package Dimensions * High breakdown voltage. * Adoption of MBIT process. * Excellent hFE linearity. unit:mm 2003B [2SC4002] 5.0 4.0 5.0 4.0 0.6 2.0 0.45 0.5 0.44 14.0 0.45 1 Specifications 1.3 2 3 1 : Emitter 2 : Collector 3 : Base SANYO : NP 1.3 Absolute Maximum Ratings at Ta = 25C Parameter Symbol Collector-to-Base Voltage Conditions Ratings Unit VCBO VCEO 400 V 400 V VEBO IC 5 200 Collector Current (Pulse) ICP 400 mA Collector Dissipation PC 600 mW 150 C -55 to +150 C Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Junction Temperature Tj Storage Temperature Tstg V mA Electrical Characteristics at Ta = 25C Parameter Symbol Conditions Ratings min typ max Unit Collector Cutoff Current ICBO VCB=300V, IE=0 0.1 A Emitter Cutoff Current IEBO VEB=4V, IC=0 0.1 A DC Current Gain hFE VCE=10V, IC=50mA fT VCE(sat) VBE(sat) VCE=30V, IC=10mA IC=50mA, IB=5mA Gain-Bandwidth Product Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage 60* 70 IC=50mA, IB=5mA * : The 2SC4002 is classified by 50mA hFE as follows : Rank D E hFE 60 to 120 100 to 200 200* MHz 0.6 V 1.0 V Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 82903TN (KT)/D1598HA (KT)/6139MO, TS No.2960-1/3 2SC4002 Continued from preceding page. Parameter Symbol Collector-to-Base Breakdown Voltage Ratings Conditions min V(BR)CBO IC=10A, IE=0 V(BR)CEO IC=1mA, RBE= Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage typ max Unit 400 V 400 V V(BR)EBO Cob IE=10A, IC=0 VCB=30V, f=1MHz Cre ton VCB=30V, f=1MHz Turn-ON Time See specified test circuit. Turn-OFF Time toff See specified test circuit. 5.0 s Output Capacitance Reverse Transfer Capacitance 5 V 4 pF 3 pF 0.25 s Switching Time Test Circuit PW=20s D.C.1% IB1 IB2 OUTPUT INPUT RB VR RL 50 VCC=150V + 470F + 100F VBE= --1V 10IB1= --10IB2=IC=50mA RL=3k, RB=200 at IC=50mA IC -- VBE 120 hFE -- IC 5 VCE=10V VCE=10V 3 Ta=70C DC Current Gain, hFE 2 80 25C 100 60 25C 20 --30C 40 Ta=70C Collector Current, IC - mA 100 --30C 7 5 3 2 10 7 5 0 0 0.2 0.4 0.6 0.8 1.0 1.2 Base-to-Emitter Voltage, VBE - V 7 1.4 7 5 3 2 Ta=70C 7 25C, --30C 5 7 10 2 3 5 7 100 2 3 ITR06236 IC / IB=10 7 Base-to-Emitter Saturation Voltage, VBE (sat) - V Collector-to-Emitter Saturation Voltage, VCE (sat) - V 1.0 5 VBE(sat) -- IC 10 IC / IB=10 0.1 3 Collector Current, IC - mA VCE(sat) -- IC 2 2 1.0 ITR06235 5 3 2 1.0 Ta= --30C 7 5 70C 25C 3 3 2 2 7 1.0 2 3 5 7 10 2 3 Collector Current, IC - mA 5 7 2 100 ITR06237 7 1.0 2 3 5 7 10 2 3 5 Collector Current, IC - mA 7 100 2 3 ITR06238 No.2960-2/3 2SC4002 SW Time -- ID 10 3 2 7 5 tf 3 2 0.1 7 5 1.0 2 3 5 7 IC=200mA 10 ms 100 5 DC 3 2 op era tio n(T a= 10 25 C ) 5 3 2 1.0 5 10 2 3 5 7 100 Collector Current, IC - mA 2 3 5 ITR06239 2 3 5 7 10 2 3 5 7 100 2 Collector-to-Emitter Voltage, VCE - V 3 5 ITR06240 PC -- Ta 700 Collector Dissipation, PC - mW ton Ta=25C VCC=150V 10IB1= --10IB2=IC ICP=400mA 3 2 s 1.0 5 s 1m Collector Current, IC - mA tst g 5 0m 10 Switching Time, SW Time - s 7 ASO 1000 600 500 400 300 200 100 0 0 20 40 60 80 100 120 Ambient Temperature, Ta - C 140 160 ITR06241 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of August, 2003. Specifications and information herein are subject to change without notice. PS No.2960-3/3