TLP281(GB-TP) - Toshiba - Datasheet.Directory

TLP281,TLP281-4

2007-10-01 1

TOSHIBA PHOTOCOUPLER GaAs IRED & PHOTO-TRANSISTOR

TLP281,TLP281-4

PROGRAMMABLE CONTROLLERS

AC/DC-INPUT MODULE

PC CARD MODEM(PCMCIA)

TLP281 and TLP281-4 is a very small and thin coupler, suitable

for surface mount assembly in applications such as PCMCIA Fax

modem, programmable controllers.

TLP281 and TLP281-4 consist of photo transistor, optically coupled

to a gallium arsenide infrared emitting diode.

z Collector-Emitter Voltage : 80 V (MIN)

z Current Transfer Ratio : 50% (MIN)

Rank GB : 100% (MIN)

z Isolation Voltage : 2500 Vrms (MIN)

z UL Recognized : UL1577 , File No. E67349

z BSI Approved : BS EN 60065: 2002,

: BS EN 60950-1: 2002

Certificate No. 8143, 8144

Pin Configuration (top view)

1:ANODE

2:CATHODE

3:EMITTER

4:COLLECTOR

1,3,5,7 :ANODE

2,4,6,8 :CATHODE

9,11,13,15 :EMITTER

10,12,14,16 :COLLECTOR

TLP281 TLP281-4

8 9

7 10

TOSHIBA ―

Weight: 0.05 g

TOSHIBA ―

Weight: 0.19 g

Unit in mm

TLP281,TLP281-4

2007-10-01 2

*1: Ex. rank GB: TLP281 (GB)

(Note): Application type name for certification test, please use standard product type name, i.e.

TLP281 (GB): TLP281−1 , TLP281−4 (GB): TLP281−4

Current Transfer Ration (%)

(IC / IF)

IF = 5 mA, VCE = 5 V, Ta = 25℃

TYPE Classi-

Fication(*1)

Min Max

Marking of Classification

Blank 50 600

Blank ,Y■,YE,G,G■,GR,B,BL,GB

Rank Y 50 150 YE

Rank GR 100 300 GR

Rank BL 200 600 BL

Rank GB 100 600 GB

Rank YH 75 150 Y■

Rank GRL 100 200 G

Rank GRH 150 300 G■

TLP281

Rank BLL 200 400 B

Blank 50 600

Blank , GB

TLP281-4

Rank GB 100 600 GB

TLP281,TLP281-4

2007-10-01 3

Absolute Maximum Ratings (Ta = 25℃)

RATING

CHARACTERISTIC SYMBOL

TLP281 TLP281−4 UNIT

Forward Current IF 50 mA

Forward Current Derating ∆IF /°C −0.7 (Ta≥53°C) −0.5 (Ta≥25°C) mA /°C

Pulse Forward Current IFP 1 A

Reverse Voltage VR 5 V

LED

Junction Temperature Tj 125 °C

Collector-Emitter Voltage VCEO 80 V

Emitter-Collector Voltage VECO 7 V

Collector Current IC 50 mA

Collector Power Dissipation

(1 Circuit) PC 150 100 mW

Collector Power Dissipation

Derating(Ta≥25°C) (1 Circuit) ∆PC /°C −1.5 −1.0 mW /°C

DETECTOR

Junction Temperature Tj 125 °C

Operating Temperature Range Topr −55~100 °C

Storage Temperature Range Tstg −55~125 °C

Lead Soldering Temperature Tsol 260 (10s) °C

Total Package Power Dissipation

(1 Circuit) PT 200 170 mW

Total Package Power Dissipation

Derating (Ta≥25°C) (1 Circuit) ∆PT /°C −2.0 −1.7 mW /°C

Isolation Voltage (Note1) BVS 2500(AC,1min,R.H.≤60%) Vrms

Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the

significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even

if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum

ratings.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook

(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test

report and estimated failure rate, etc).

(Note1) Device considered a two terminal device : LED side pins shorted together and DETECTOR side pins shorted

together.

Individual Electrical Characteristics (Ta = 25℃)

CHARACTERISTIC SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT

Forward Voltage VF I

F = 10 mA 1.0 1.15 1.3 V

Reverse Current IR V

R = 5 V — — 10 μA

LED

Capacitance CT V = 0, f = 1 MHz — 30 — pF

Collector-Emitter

Breakdown Voltage

V(BR) CEO I

C = 0.5 mA 80 — — V

Emitter-Collector

Breakdown Voltage

V(BR) ECO I

E = 0.1 mA 7 — — V

VCE = 48 V,

Ambient Light Below

(100 ℓx)

— 0.01

(2)

0.1

(10) μA

Collector Dark Current

(Note2) ICEO VCE = 48 V, Ta = 85°C

Ambient Light Below

(100 ℓx)

— 2

(4)

(50) μA

DETECTOR

Capacitance

(Collector to Emitter) CCE V = 0, f = 1 MHz — 10 — pF

(Note 2) Because of the construction,leak current might be increased by ambient light.

Please use photocoupler with less ambient light.

TLP281,TLP281-4

2007-10-01 4

Coupled Electrical Characteristics (Ta = 25℃)

CHARACTERISTIC SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT

50 — 600

Current Transfer Ratio IC / IF

IF = 5 mA, VCE = 5 V

Rank GB 100 — 600

— 60 —

Saturated CTR IC / IF (sat)

IF = 1 mA, VCE = 0.4 V

Rank GB 30 — —

IC = 2.4 mA, IF = 8 mA — — 0.4

— 0.2 —

Collector-Emitter

Saturation Voltage

VCE (sat) IC = 0.2 mA, IF = 1 mA

Rank GB — — 0.4

Off-State Collector Current IC (off) VF = 0.7 V, VCE = 48 V — — 10 μA

Isolation Characteristics (Ta = 25℃)

CHARACTERISTIC SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT

Capacitance

(Input to Output) CS VS = 0 V, f = 1 MHz — 0.8 — pF

Isolation Resistance RS VS = 500 V, R.H.≤60% 5×1010 1014 — Ω

AC , 1 minute 2500 — —

AC , 1 second,in OIL — 5000 —

Vrms

Isolation Voltage BVS

DC , 1 minute, in OIL — 5000 — Vdc

Switching Characteristics (Ta = 25℃)

CHARACTERISTIC SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT

Rise Time tr — 2 —

Fall Time tf — 3 —

Turn-On Time ton — 3 —

Turn-Off Time toff

VCC = 10 V, IC = 2 mA

RL = 100Ω

— 3 —

μs

Turn-On Time tON — 2 —

Storage Time ts — 25 —

Turn-Off Time tOFF

RL = 1.9 kΩ (Fig.1)

VCC = 5 V, IF = 16 mA

— 40 —

μs

(Fig.1)SWITCHING TIME TEST CIRCUIT

TLP281,TLP281-4

2007-10-01 5

TLP281

TLP281-4

TLP281

TLP281-4

TLP281,TLP281-4

2007-10-01 6

TLP281,TLP281-4

2007-10-01 7

TLP281,TLP281-4

2007-10-01 8

RESTRICTIONS ON PRODUCT USE 20070701-EN

• The information contained herein is subject to change without notice.

• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor

devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical

stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of

safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of

such TOSHIBA products could cause loss of human life, bodily injury or damage to property.

In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as

set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and

conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability

Handbook” etc.

• The TOSHIBA products listed in this document are intended for usage in general electronics applications

(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,

etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires

extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or

bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or

spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,

medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his

document shall be made at the customer’s own risk.

• The products described in this document shall not be used or embedded to any downstream products of which

manufacture, use and/or sale are prohibited under any applicable laws and regulations.

• The information contained herein is presented only as a guide for the applications of our products. No

responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which

may result from its use. No license is granted by implication or otherwise under any patents or other rights of

TOSHIBA or the third parties.

• GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break,

cut, crush or dissolve chemically.

• Please contact your sales representative for product-by-product details in this document regarding RoHS

compatibility. Please use these products in this document in compliance with all applicable laws and regulations

that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses

occurring as a result of noncompliance with applicable laws and regulations.