Dimensions in mm Connectors according to DIN 41612 / IEC 60603-2 Type B/2 Female connector Hole pattern Press-fit technology - Performance level II Termination length No. of contacts 16 Contact arrangement a b 4 3 2 1 4 3 2 1 32 Part number 102-69004-xx 102-79006-xx 102-79106-xx 102-69064-xx 102-79066-xx 102-79166-xx Accessories - Press-fit tool (see page 208) - Support tool (see page 209) - Coding accessories (see page 160) On request - Performance levels I + III or customer-specific - Special contact length - Alternative surface Sn, e. g. for WireWrap Note - * Rear mating zone performance level II Ordering note - PCB 1.5 to 2.0 mm = xxx-xxxxx-01 with termination length = 3.2 mm - PCB 2.0 to 2.8 mm = xxx-xxxxx-02 with termination length = 4.6 mm - PCB > 2.8 mm = xxx-xxxxx-03 with termination length = 4.6 mm 90 Options - Without flange - Contact arrangement (see page 162) ept GmbH I Phone +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-mail sales@ept.de I www.ept.de Connectors according to DIN 41612 / IEC 60603-2 Type B/2 Female connector Solder technology - Performance level II Termination length Manual soldering with solder lug No. of contacts 16 Contact arrangement a b 4 3 2 1 4 3 2 1 32 Accessories - Coding accessories (see page 160) Part number 102-90004 102-90005 102-90006 102-90025 102-90064 102-90065 102-90066 102-90075 On request - Performance levels I + III or customer-specific - Also in THTR Options - Board lock (see page 159) - Contact arrangement (see page 162) ept GmbH I Phone +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-mail sales@ept.de I www.ept.de 91