MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Low impedance, 105C
CAT. No. E1001D
@Ultra Low impedance for Personal Computer and Storage Equipment
@Rated voltage 63 to 100V newly added
@Endurance with ripple current: 105C 2000 to 5000 hours
@Non solvent-proof type
?SPECIFICATIONS
(at 20C, 120Hz)
(at 20C after 2 minutes)
(at 20C, 120Hz)
(at 120Hz)
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
Items
-
40 to +105C
6.3 to 100Vdc
P20% (M)
I=0.01CV or 3MA, whichever is greater.
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
Rated voltage (Vdc)
tanE (Max.)
When nominal capacitance exceeds 1000MF, add 0.02 to the value above for each 1000MF increase.
Z (-25C) / Z (+20C) 2max.
Z (-40C) / Z (+20C) 3max.
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for the specified period of time at 105C.
Time F5 & F6.3 : 2000hours F8 : 3000hours F10 : 4000hours F12.5 & F16 : 5000hours
Capacitance change [P25% of the initial value
D.F. (tanE)[200% of the initial specified value
Leakage current [The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 500 hours at 105C
without voltage applied.
Capacitance change [P25% of the initial value
D.F. (tanE)[200% of the initial specified value
Leakage current [The initial specified value
Characteristics
6.3V
0.22 10V
0.19 16V
0.16 25V
0.14 35V
0.12 50V
0.10 63V
0.09 80V
0.09 100V
0.08
?DIMENSIONS (Radial Lead Type=VB) [mm]
?PART NUMBERING SYSTEM
KZE 6.3 VB 1500 M J20
Capacitance
4.7MF
10MF
100MF
2200MF
Code
4R7
10
100
2200
Case code
Cap tolerance (P20%)
Nominal cap code
Radial lead type
Rated voltage in volts
Series name
5
0.5
2.0
fD
fd
F
fD'
L'
6.3
0.5
2.5
8
0.6
3.5
12.5
0.6
5.0
16
0.8
7.5
10
0.6
5.0
FD+0.5max.
L+1.5max.
lower Z
KZE
Lower Z
KY
KZH
Sleeve
L' 15min 4min
FD'
Fd
FP0.5
Vent
(except F5 & F6.3)
FP0.5
(F5 to F10) (F12.5 to F16)
Gas escaped end seal
?RATED RIPPLE CURRENT MULTIPLIERS
120
0.40
0.50
0.60
0.75
0.85
1k
0.75
0.85
0.87
0.90
0.95
10k
0.90
0.94
0.95
0.95
0.98
100k
1.00
1.00
1.00
1.00
1.00
Capacitance(mF) Frequency (Hz)
6.8 to 180
220 to 560
680 to 1,800
2,200 to 3,900
4,700 to
@Frequency Multipliers
Upgrade!
Upgrade!
(1/2)
ALUMINUM ELECTROLYTIC CAPACITORS