NA-2
NAM series
Low leakage current type
NAM -10 -000 -O
Ordering information
1 Model Name
2 Rated Current
3 Line to ground capacitor code:See table 1.1.
table1.1 Line to ground capacitor code
Code Leakage Current
(Input 125/250V 60Hz)
Line to ground
capacitor
(nominal value)
000 5 A/ 10 A max Not Provided
101 12.5 A/ 25 A max 100pF
221 25 A/ 50 A max 220pF
331 37.5 A/ 75 A max 330pF
471
50 A/
100 A max 470pF
* When the line to ground capacitor code is
different, the attenuation characteristic is
different.
4 Options
D
:DIN rail installation type
*
The dimensions change when the option is set.
Refer to External view.
1 2 3 4
Features of NAM series
Circuit Diagram Derating Curve
LI
NE
Case
: Mounting Plate
1
24
3
CY
CY
CY : Line to ground capacitor
LOAD
Low leakage current type
- Single Phase 250 VAC
- Push down type terminal block
R
9050 60 70 80
20
0
-4040-30-20
100
80
60
40
55
Ambient Temperature [C]
Load Factor [%]
Specifications
No. Items NAM-04-000 NAM-06-000 NAM-10-000 NAM-16-000 NAM-20-000 NAM-30-000
1Rated Voltage[V] AC 1f 250 / DC250
2 Rated Current[A] 4 6 10 16 20 30
3 Test Voltage (Terminal-Mounting Plate) 2,500 VAC (Cutoff Current = 20mA), 1minute at room temperature and humidity
4 Isolation Resistance (Terminal-Mounting Plate) 500 VDC 100MW min at room temperature and humidity
5 Leakage current 125/250V 60Hz 5A/10 A max
6 Voltage drop 1.0V max
7 Safety agency approval temperatures -25 to +85C (Refer to Derating Curve)
8 Operating temperature -40 to +85C (Refer to Derating Curve)
9 Operating humidity 20 to 95%RH (Non condensing)
10 Storage temperature/humidity -40 to +85C/20 to 95%RH (Non condensing)
11 Vibration 10 to 55Hz, 19.6m/s2 (2G), 3min. Period, 1hour each X, Y and Z axis
12 Impact 196.1m/s2 (20G), 11ms Once each X, Y and Z axis
13 Safety agency approvals UL1283, CSA C22.2 No.8 (C-UL), DIN EN60939 VDE0565 Teil3-1, ENEC (At only AC input)
14 Case size (without projection) /Weight
53X41X92 mm [2.09X1.61X3.62 inches] (WXHXD) /300g max (Option : -D refer to external view)
DIN rail installation type is optionThe terminal cover is retracted inside the unit
NA-5
NAH,NAC,NAM,NAP series
Mounting Plate
Terminal cover
2-Protection Earth
6-M4
2-f4.8
Name Plate
¶ Tolerance : ±1 [±0.04]
¶ Weight : 300g max
¶ Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 [0.04]
¶ Case : PBT
¶ Dimensions in mm, [ ]=inches
¶ Terminal block screw tighting torque M4:1.6N-m (16.9kgf-cm) max
Output
Terminal
Input
Terminal
Output
Terminal
Mounting Hole
Input
Terminal
82 ±0.5
77
15
45 ±0.5
(2)
41
53
[2.09]
[1.61]
[0.08]
[1.77]
[0.47]
[0.59]
92
Terminal cover
¶ Closed the terminal cover
12
8
27
(2.5)
[0.1]
[3.62]
[3.23]
[0.19]
[3.03]
[1.06]
[0.31]
As this product is adopted push-down type terminal block, this appearance is as follows.
1The terminal cover is retracted inside the unit.
2The screws for connecting the terminals are held in the up right position.
¡Note when installing the EMI/EMC
Filter on a DIN rail.
When the EMI/EMC Filter is grounded through
the DIN rail, the proper noise attenuation may not
be achieved.
Be sure to connect the protection earth (PE) of
the EMI/EMC Filter body to the earth.
It can connect the ground to either one only.
6-M4
Name Plate
Output
Terminal
Output
Terminal
7
(9)
(11)92
53
41 (2)
12
15
77
¶ Tolerance : ±1 [±0.04]
¶ Weight : 300g max
¶ Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 [0.04]
¶ Case : PBT
¶ Dimensions in mm, [ ]=inches
¶ Terminal block screw tighting torque M4:1.6N-m (16.9kgf-cm) max
(2.5)
8
27
2-Protection Earth
Mounting Plate
Terminal cover
DIN rail
Input
Terminal
Input
Terminal
Terminal cover
¶ Closed the terminal cover
[2.09]
[0.47]
[0.59]
[0.35]
[0.28]
[0.08]
[1.61]
[0.1]
[3.62] [0.43]
[3.03]
[1.06]
[0.31]
Standard Type
DIN rail installation Type
Name Plate
DIN rail
External view
