Selector Chart For Fuseholders Panel Mount Snap-in NEW NEW Rear mount captive fuse carrier recessed fuse carrier Press fit version Series / page FPG / 74 FPG / 76 FPG / 77 FBS / 86 Panel mount * * * rear mount * * Solder/quick terminals * * * * * * * * * Solder terminals FEU / 80 * Holds 5x20mm fuse Holds 5x20mm or 1 / 4 x 11/ 4" fuse * Finger grip or slotted fuse carriers available for most styles - ordered separately. Watertight and medical grade versions available. Panel and Pcb Mount High current Series / page FIZ, FUL / 82 Panel mount * Pcb mount Quick terminals * Holds 5x20mm fuse Holds 5x20mm or 1 / 4 x 11/ 4" fuse * Captive fuse carrier FPG / 84 FPG, FBS / 83 FAC / 85 FAU / 85 * * * * * * * * * Finger grip or slotted fuse carriers available for most styles - ordered separately. Watertight and medical grade versions available. Pcb Mount Blocks and Clips SMT fuseholder Series / page OMH / 87 Surface mount * Through-hole mount Fuse blocks OG, OGN, OGD / 88 Holds 5x20mm fuse Holds 5x20mm or 1 / 4 x 11/ 4" fuse Fuse clips Microfuse holders OG / 91-92 FMS, FMR / 90 * * * * * Screw mount Holds SMT fuse Fuse blocks UH, UHB, RSH / 89 * * * * * * * * for series MSF 125V microfuse Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com 73 About Shock Safety for Fuseholders and Power Entry Modules Miniature Fuses Miniature Fuses are protective devices for electrically powered apparatus, small motors, measuring instruments, semiconductors, or assembled circuits. They protect against damage and destruction as a result of unacceptable current loads and short circuits. According to VDE 0820 and IEC 257, miniature fuses consist of a fuseholder, a fuse, and possibly a bayonet-type cap (fuse carrier). A distinction is made between open and closed types. The particular advantage of the closed designs is that there is less risk of electrical shock both in normal use and while changing the fuse. Extra-safe handling with Schurter power entry modules Protection against contact with live parts is an important aspect when dealing with electrical connecting devices. Both your customers and your servicing engineers will appreciate the greatest possible protection against accidental contact with live parts--something which can easily happen as a result of inappropriate use, or during servicing or repair work. In particular, our "shocksafe," "extra-safe fuse-drawers" and "protective covers" precautions are effective ways of protecting against accidental contact when using the power entry modules. Explanations, thermal requirements, selection criteria 1. Remarks on PC2 a) Closed fuseholder b) When the fuse carrier is removed, no life parts can be touched. c) During insertion or removal of a fuse, no live parts can be touched, neither through the fuse nor the fuse carrier. Protection against electric shock (against direct contact with live parts) for fuseholders The assessment of the protection against electric shock assumes that the fuseholder is properly assembled, installed and operated as in normal use, e.g., on the front panel of the equipment. IEC 60127-6 and EN 60127-6 divides into three categories: Category Features PC1 Fuseholders without integral protection against electric shock. They are only suitable for applications where corresponding additional means are provided to protect against electric shock. PC2 Fuseholders with integral protection against electric shock Live part is not accessible: - when the fuseholder is closed - after the fuse carrier (incl. fuse) has been removed - either during insertion or removal of the fuse carrier (inc. fuse) Compliance is checked by using the standard test finger specified in IEC 60529. PC3 Fuseholder with enhanced integral protection against electric shock The requirements for this category are the same as those for category PC2, with the exception that the testing is carried out with a rigid test wire of 1 mm diameter according to IEC 60529, table VI, instead of the standard test finger. Remarks on PC3 Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com 3 About Shock Safety For Power Entry Modules, continued Thermal requirements of the fuseholder Illustration of temperatures experienced in practice 2.1 Influencing factors Front panel of the equipment The design engineer of electrical equipment is responsible for its safety and functioning to humans, animals and real values. Above all, it is his task to make sure that the state of the art as well as the valid national and international standards and regulations be observed. TA1 In view of the safety of electrical equipment the selection of the most suitable fuseholder is of great importance. Among other parameters, one has to make sure that the maximum admissible power acceptances and temperatures defined by the manufacturer are followed. Differing definitions and requirements in the most important standards for fuses and fuseholders are time and again origin for the incorrect selection of fuseholders. T A1 TA2 T S1 T For a correct selection, the following influence factors, depending on the application and mounting method, have to be followed: 2.2 Rated current of a fuseholder The value of current assigned by the manufacturer of the fuseholder and to which the rated power acceptance is referred. S2 The rated power acceptance of a fuseholder is determined by a standardised testing procedure according to IEC 60127-6. It is intended to be the power dissipation caused by the inserted dummy fuse at the rated current of the fuseholder and at an ambient air temperature of TA1 = TA2 = 23C (over a long period). During this test the following temperatures must not be exceeded on the surface of the fuseholder: Fuseholder surface area Maximum allowable temperature measuring points (see figure 1) C 1. Accessible parts 1) TS1 85 2. Inaccessible parts 1) Insulating parts TS2 2) NOTES: = ambient air temperature, surrounding the equipment = ambient air temperature in the equipment = temperature of accessible parts on fuseholder surface = temperature of inaccessible parts on fuseholder surface Example of a derating curve I admissible power acceptance in Watts 2.4 Rated power acceptance and admissible temperatures of a fuseholder. TA2 2.5 Correlation between operating current I, ambient air temperature TA1 and the power acceptance Ph of the fuseholder. 2.3 Rated power dissipation of the fuse (power dissipation at rated current) See product group "fuses," page 102. TS2 TS1 To equate the rated current of a fuse with the rated current of the fuseholder, may, especially at higher currents, cause high, not admissible temperatures, when the influence of the power dissipation in the contacts of the fuseholder was not taken into consideration. 1. Rated power dissipation of the suitable fuse. 2. Admissible power acceptance, operating current and temperatures of the suitable fuseholder. 3. Differing ambient air temperatures outside and inside of the equipment. 4. Length and cross section of the connecting wire. 5. Head dissipation/cooling, ventilation. Heat influence of adjacent components. Cover of the equipment FOLDOUT PAGE 3 2. = operating current of the fuseholder 3.50 I << In 3.00 I = 0.7 In I = 1.0 In 2.50 2.00 1.50 1.00 0.50 0.00 TA1 20 30 40 50 ambient air temperature TA1 in C 60 70 80 90 (C) 85 C = TS1 max. = TA1 max The derating curves demonstrate the admissible power acceptance of a fuseholder depending on the ambient air temperature T A1 for the following fuseholder operating currents: I << In, I = 0,7 * In and I = 1,0 * In . This power acceptance corresponds to the max. admissible power dissipation of a fuse-link. 1) When the fuseholder is properly assembled, installed and operated as in normal use, e.g., on the front panel of equipment. The corresponding values for other operating currents can be interpolated between the existing curves or calculated as follows: 2) The maximum allowable temperature of the used insulating materials corresponds to the Relative Temperature Index (RTI) according to IEC 60216-1 or UL 746 B. Ph = Po - P c = Po - (R c * I2) Ph = admissible power acceptance in watt of the fuseholder, depending on T A1 Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com About Shock Safety For Power Entry Modules, continued Po I Rc 3. Selection of a suitable fuseholder with respect to the power acceptance at the corresponding ambient air temperature. 4.2 What is the admissible power acceptance Ph of the fuseholder? Solutions 4.2.1 4.2.2 The result of the interpolation for the rated current I = 5 A is a Ph of approx. 2,4 W. The result of the calculation is Ph = Po - (Rc * I2) = 2,5 - (0,005 * 52) = 2,37 W P 2,4 W. Derating curves of the fuseholder, type FEF, rated current In - 10A P = 2,4 W = admissible power n acceptance at TAI - 50C Summary The adherence to the limits, indicatd by SCHURTER, in particular the power acceptance limits at the corresponding ambient air temperatures and mounting conditions of the fuseholder, is important for the safety of the product. It is therefore necessary to observe the following two steps: Step 1 Selection of the fuseholder based on the power acceptance Ph at operating current I and maximum ambient air temperature TA1. Pf Ph = Po - Pc = Po - (Rc * I2) Pf = rated power dissipation in watt of the fuse-link, calculated from (In . U), whereas: In = rated current in ampere of the fuse-link U = voltage drop in volt at In ; values according to SCHURTER's catalog. Ph, Po, Pc, Rc = see pos. 2.5 admissible power acceptance in Watts FOLDOUT PAGE 4 Pc = admissible power acceptance in watt of a fuseholder at I << In , depending on TA1 . The values can be taken from the derating curve I << In of the corresponding fuseholder. = power dissipation in watt in the fuseholder contacts at the operating current in ampere. = operating current in ampere of the fuseholder. = contact resistance in ohm between the fuseholder terminals according to SCHURTER's catalog. 3.50 I << In 3.00 I = 0.7 In I = 1.0 In 2.50 2.00 1.50 1.00 0.50 0.00 20 30 40 50 60 70 80 90 ambient air temperature TA1 in C Step 2 The reduction of the power acceptance of the fuseholder (from step 1) based on the different conditions at the mounting place etc. have to be determined by the design engineer responsible. 4.4 Verification of the thermal requirements Examples: * ambient air temperature is considerably higher inside of an equipment than outside (TA2 > TA1 ) * cross-section of the conductor, unfavourable heat dissipation * heat influence of adjacent components Pf Ph (c) this means: the rated power dissipation Pf of the fuse-link must be less/equal than the admissible power acceptance Ph of the fuseholder. Therefore, temperature measurements on the appliance under normal and faulty conditions are absolutely necessary. 4. Example Pf = 0,4 W; Ph = 2,4 W at TA1 = 50 C Step 2 To consider the different conditions at the mounting place according to step 1, see illustration in section 2.4. 4.5 Conclusion (without consideration of step 2) 4.1 What's given? * Step 1 The following condition must be fulfilled: Fuse FSF 0034.1523, rated current In = 5 A. Voltage drop U at In = 80 mV, typ. Rated power dissipation Pf = (In * U) = (5 A * 0,08 V) = 0,4 W. * Fuseholder FEF 0031.1081, rated current In = 10 A Rated power acceptance at TA1 23 C = 3,2 W. * Ambient air temperature = 50 C. Admissible power acceptance Ph at an ambient air temperature TA1 50 C according to the derating curve: Ph at I << I n = 2,5 W I = 0,7 * In = 7 A = 2,2 W I = 1,0 * In = 10 A =2 W * Contact resistance R c = 5 m * The value Pf is less than Ph . The condition according to formula is fulfilled. It has been chosen a suitable fuseholder. * If the value Pf were greater than P h the condition wouldn't be fulfilled. In that case, do select another fuseholder with a higher power acceptance or change the thermal conditions at the fuseholder mounting place. Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com About Shock Safety For Power Entry Modules, continued 5. Standards for fuseholders IEC IEC 257 EN EN 60257 IEC 60127-6 EN 60127-6 NF UL CSA NF C93-436 UL 512 CSA, C22.2-39 IEC: International Electrotechnical Commission EN: European Standard NF: French Standard 6. Title Fuseholders for miniature fuse-links. This standard has been replaced by the new standard IEC 60127-6. Fuseholders for miniature fuse-links. This standard replaces the IEC 257. Fuseholders for professional purposes Fuseholders Fuseholder assemblies UL: Underwriters Laboratories Inc. USA CSA: Canadian Standards Association Explanation to the main fuseholder standards Extra-Safe Medical Fuse Drawers for Power Entry Modules As mentioned in section 2, the most relevant standards define rated current and rated power acceptance differently. This lead in the past often to confusion or even to a wrong fuseholder design-in. For example the standard UL 512 does not define a maximum power acceptance value, but sets a certain value of temperature rise for the fuseholder. For this reason the marked amperage values on the fuseholder, defined by UL and CSA, are not suggested to be used except in special cases. In order to eliminate such confusion, SCHURTER new decided to define the rated current and rated power acceptance values according to IEC 60127-6 and EN 60127-6. For added safety, extra-safe fuse drawers are available for the SCHURTER line of power entry modules (with and without mains filters). The drawer can only be removed with the aid of a tool (e.g. screwdriver) so that opening by hand is virtually impossible. With the KEA series, it is also necessary to pull out the mains outlet first. Only then can the drawer be removed from the socket. Extra-safe fuse drawers are able to satisfy the following standards and international specifications: Appliance standard IEC 601-1, BS 5724 part 1, and DIN/VDE 0750 part 1 (suitable for medical applications). The most important definitions are to be found in section 2. Conclusion * * * The high UL and CSA current ratings are replaced by more realistic rated currents defined by SCHURTER. Focused on the new fuseholder standard IEC 60127-6 and EN 60127-6, the power acceptance of several fuseholders had to be reduced. The design-in procedure and in particular to choose the correct fuseholder in terms of thermal requirements (refer to section 2-4) is now made much easier. Your advantages: * More security for your equipment * Faster and much easier selection of the correct fuseholder 6 Fig.1 Extra-safe fusedrawer can only be removed with the aid of a tool (e.g. screwdriver) Fig.2 Fingergrip fusedrawer can be removed by hand Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com About Power Dissipation Power dissipation is the product of voltage drop multiplied by rated current. Power dissipation generates heat. High in-rush and/or higher operating temperatures can become a problem. Too much heat may lead to melting of the plastic, contact problems, premature failure of the fuse, etc. Therefore, suitable fuseholders/power entry modules must be selected not only by desired function and application specific requirements, but also by the amount of power dissipation through the area holding the fuse. Current ratings for fuseholders/power entry modules vary widely from agency to agency, due to different methods used for temperature rise testing. For the specifier, it is important to know that the temperature rise testing is performed at UL and CSA using dummy inserts in place of actual fuses. European test agencies, however, rely on IEC methods that reflect more realistic field conditions. Current ratings provided by the test agency should always be observed. However, it is imperative that attention also be given to the maximum permissible power dissipation values provided by the manufacturer when selecting a fuseholder/power entry module. For further clarification, please refer to the following excerpt from IEC 257 amendment 2, as shown below: * Depending upon the type of fuse-link applied in the holder and the possible prolonged overloads of this fuse-link, the contributions to the actual power dissipation in the holder produced by the contact resistances and the fuse-link may vary considerably. * Certain types of miniature fuse-links, covered by IEC Publication 127-2, especially the quick-acting type with high breaking capacity, may sustain overloads at a level of 1.7 to 2.1 times rated current for a considerable period of time. The application of such fuse-links in closed fuseholders can under those circumstances result in temperature rises of the holder and its accessible parts, beyond the limits e.g. given in IEC Publication 65: Safety Requirements For Mains Operated Electronic and Related Apparatus For Household and Similar Use. Attention should therefore be given to the possibility of a dangerous situation arising out of such overloads. MAXIMUM POWER DISSIPATION VALUES Ambient temperature +23C (0.1) according to IEC 127-6 Fuseholders Fuseholders LEGEND LEGEND 5 X 20mm = 5 X 20mm = 1 1 /4 x 11/4" = /4 x 11/4 " = Quick-connect terminals Pcb terminals Tamb Values are determined at ambient temperatures ranging from +20C to +80C Power Entry Modules Tamb Values are determined at ambient temperatures ranging from +20C to +80C Power Entry Modules LEGEND LEGEND 2 Pole = 2 Pole = 1 Pole = 1 Pole = Tamb Tamb KP / GSF1 / GSF2 5 x 20 Values are determined at ambient temperatures ranging from +20C to +80C Values are determined at ambient temperature +23C. Values at a higher ambient temperature on request. Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com 7 "Press fit" Panel Mount Fuseholders for 5 x 20mm Fuses FOLDOUT PAGE 74 FPG * Rated voltage: 250 V * New panel-mount, front side, press-fit mount, secured with potting compound on the rear side * Shocksafe category PC2 * Rated voltage: 250 V * Rated current: 10 A * Rated power acceptance at ambient air temperature Ta 23 C: 2.5 W * Power acceptance at higher Ta: see derating curves * Allowable ambient air temperatures Ta for accessible parts: -25 to +85 C NEW FPG Important note The potting compound may have an major influence on the termal behavior of the fuseholder. It is therefore necessary to check the admissible temperatures surface. Panel thickness max. Standards IEC 60127-6 (formerly IEC 257), EN 60127-6 (formerly EN 60257), UL 512, CSA C22.2-39 solder-/quick-connect terminals 4.8 x 0.5 mm, tin plated, for conductor cross-sections up to 2.5 mm2 * bayonet type fuse carrier, slotted * solder-/quick-connect terminals: 4.8 x 0.5 mm * degree of protection IP40 from frontside according to IEC 60529 * sealed from the rear * suitable for equipment with protection classes I and II according to IEC 60536 Approvals, Patents UL recognition (16 A/250 V) CSA certification (16 A/250 V) VDE approval (10 A/250 V) File #E39328 File #LR38467 File #77570 Admissible power acceptance in Watts Derating curve 2.50 I << In I = 0.7 In 2.00 I = 1.0 In 1.50 1.00 0.50 0.00 20 30 40 50 60 Ambient air temperature Ta C Patents in U.S. (No. 4,453,794/4,536,054) and in further countries Order Numbers (see page 102 for fuses) FPG 3101.0060 Fuseholder complete with fuse carrier (slotted, IP 40), black Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com 70 80 90 FPG / FEF Shocksafe Panel Mount Fuseholders for 5 x 20mm Fuses General standards Built according to UL 512, CSA C22.2-39, DIN/ VDE 0820, IEC 257 and 127-6, EN 60257 and 60127-6, SEMKO SS-EN 60257; SEV 3133(FEF) Insulation resistance More than 10,000 meg-ohms at 500V DC/1 min. Test voltage 50 Hz for 1 minute; 3 kV between contacts, 4 kV from contacts to panel Contact Resistance Less than .005 ohm at 20 millivolts Ambient temperaturesTamb -40 C to +85 C in function of Pv Crossing frequency 60 Hz per IEC 68-2-6, test Fc Vibration resistance Environmental sealing protection Body material Contact material Patents Options Sealed (IP 67) or unsealed; .187" easy access solder/quick-connect terminals FPG FI CS 10-500 Hz; .03 inch (0.75mm) constant amplitude or 10 G constant acceleration IP 40 or 67 per IEC 529/DIN 40050 FPG: temp. resistant thermoplastic (UL 94V-O) FEF: thermoset (UL 94V-O) Brass, tin-plated U.S. FPG: white or grey body; fuseholder without hexnut Solder terminals FPG FEF FEF 4.8 x 0.5 Double start thread M 12.7 x 1.5 Double start thread M 12.7 x 1.5 fixing nut SW 14 (VDE) bayonet fuse carrier - slotted or finger grip solder/quick-connect terminals .187 x .020" (4.8 x 0.5mm) anti-rotation protection (use "D" cut-out) environmental sealing protection IP 40 (sealed from the back) or 67 (sealed from the front and back) per IEC 529/DIN 40050 * max. power dissipation 4 watts, according to IEC 127-6. For additional values P v in function of Tamb , see page 5. * * * * * UL CSA VDE SEMKO SEV UL CSA VDE SEMKO SEV SETI CS * * * * recognition certification approval approval approval (16A/250V) File #E39328 (16A/250V) File #LR38456 (10A/250V) File #77570 File (10A/250V) numbers (10A/250V) on request bayonet fuse carrier - slotted or finger grip solder terminals (end terminal 45 or 90) anti-rotation protection (use "D" cut-out) environmental sealing protection IP 40 per IEC 529/DIN 40050 max. power dissipation 4.5 watts , according to IEC 127-6. For additional values Pv in function of Tamb , see page 5. recognition certification approval approval approval approval certification (10A/250V) File #E39328 (10A/250V) File #LR38456 (10A/250V) File #8596, expert report (6.3A/250V) File (10A/250V) numbers (6.3A/250V) on request (10A/250V) Order Numbers (see page 102 for fuses) FPG 3101.0010 FPG 3101.0015 FPG 3101.7011 FPG 3101.7511 Complete fuseholder with fuse carrier (slotted) Complete fuseholder with fuse carrier (finger grip) Fuse carrier - slotted (spare part only) Fuse carrier - finger grip (spare part only) Sealed version - sealed from the front and back FPG 3101.0110 Complete fuseholder with fuse carrier (slotted, IP 67) FPG 3101.0115 Complete fuseholder with fuse carrier (finger grip, IP 67) FPG 3101.7021 Fuse carrier - slotted (IP 67, spare part only) FPG 3101.7521 Fuse carrier - finger grip (IP 67, spare part only) Accessories: 74 FEF 0031.1081 Complete fuseholder with fuse carrier (slotted) solder terminals with 90 end terminal FEF 0031.1085 Complete fuseholder with fuse carrier (slotted) solder terminals with 45 end terminal FEF 0031.1907 Complete fuseholder with fuse carrier (finger grip) solder terminals with 90 end terminal FEK 0031.3555 Fuse carrier - slotted (spare part only) FEK 0031.3560 Fuse carrier - finger grip (spare part only) Accessories: see page 93 for spare plastic or metal nut see page 93 for spare plastic or metal nut Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com FIO / FIN Shocksafe Panel Mount Fuseholders for 5 x 20mm Fuses General standards Built according to UL 512, CSA C22.2-39, DIN/ VDE 0820, IEC 257 and 127-6, EN 60257 and 60127-6, SEMKO SS-EN 60257; SEV 3133 Insulation resistance FIO: more than 100 meg-ohms at 500V DC FIN: more than 10,000 meg-ohms at 500V DC Test voltage 50 Hz for 1 minute; > 3 kV between contacts, > 4 kV from contacts to panel (6 mm) Contact Resistance Less than .005 ohm at 20 millivolts FI CS Ambient temperaturesTamb -25 C to +85 C in function of Pv Vibration resistance FIO: 10-500 Hz; .03 inch (0.75mm) constant amplitude or 10 G constant acceleration Crossing frequency 60 Hz per IEC 68-2-6, test Fc Environmental sealing protection IP 40/65/67 per IEC 529/DIN 40050 Body material Thermoset (UL 94V-O) Contact material Brass, tin-plated Sealed from the front (IP 65) or unsealed .110" solder/quick-connect terminals Sealed from the front and back (IP 67) .110" solder/quick-connect terminals FIO FIN screw type fuse carrier - slotted solder/quick-connect terminals .110 x .020" (2.8 x 0.5mm) anti-rotation protection (use "D" cut-out) environmental sealing protection IP 40 or 65 (sealed from the front), per IEC 529/DIN 40050 * max. power dissipation 2.8 watts, according to IEC 127-6. For additional values Pv in function of Tamb , see page 5. * * * * UL CSA VDE SEMKO SEV SETI CS UL CSA VDE SEMKO SEV SETI CS * * * * recognition certification approval approval approval approval certification (VDE) (10A/250V) File #E39328 (10A/250V) File #LR38456 (6.3A/250V) File #1769, expert report (6.3A/250V) File (6.3A/250V) numbers (6.3A/250V) on request (6.3A/250V) Order Numbers FIO 0031.1381 Complete IP40 fuseholder/carrier,end terminal 30 FIO 0031.1383 Complete IP40 fuseholder/carrier,end terminal 90 FEK 0031.1372 Fuse carrier (IP 40, spare part only) screw type fuse carrier - slotted solder/quick-connect terminals .110 x .020" (2.8 x 0.5mm) anti-rotation protection (use "D" cut-out) environmental sealing protection IP 67 (sealed from the front and back), per IEC 529/DIN 40050 * max. power dissipation 2.8 watts, according to IEC 127-6. For additional values Pv in function of Tamb , see page 5. recognition certification approval approval approval approval certification (10A/250V) File #E39328 (10A/250V) File #LR38456 (6.3A/250V) File #1769, expert report (6.3A/250V) File (6.3A/250V) numbers (6.3A/250V) on request (6.3A/250V) (see page 102 for fuses) Sealed from the front and back FIN 0031.1351 Complete IP67 fuseholder/carrier, end terminal straight FIN 0031.1353 Complete IP67 fuseholder/carrier,end terminal 90 FEK 0031.1371 Fuse carrier (IP 67, spare part only) Sealed version - sealed from the front FIO 0031.1361 Complete IP65 fuseholder/carrier,end terminal 30 FIO 0031.1363 Complete IP65 fuseholder/carrier,end terminal 90 FEK 0031.1371 Fuse carrier (IP 65, spare part only) Accessories: See page 93 for square flange, anti-rotation washer, spare plastic or metal nut, face plates Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com 75 Snap-in Mount Fuseholders FPG / FEF Shocksafe for 5 x 20mm Fuses General standards Built according to UL 512, CSA C22.2-39, DIN/ VDE 0820, IEC 257 and 127-6, EN 60257 and 60127-6, SEMKO SS-EN 60257; SEV 3133(FEF) Insulation resistance More than 10,000 meg-ohms at 500V DC/1 min. Test voltage 50 Hz for 1 minute; 3 kV between contacts, 4 kV from contacts to panel Contact Resistance Less than .005 ohm at 20 millivolts Ambient temperaturesTamb -40 C to +85 C in function of Pv Crossing frequency 60 Hz per IEC 68-2-6, test Fc .187" easy access solder/quick-connect terminals Vibration resistance Environmental sealing protection Body material Contact material Patents Options FI (VDE) CS 10-500 Hz; .03 inch (0.75mm) constant amplitude or 10 G constant acceleration IP 40 per IEC 529/DIN 40050 FPG: temp. resistant thermoplastic (UL 94V-O) FEF: Thermoset (UL 94V-O) Brass, tin-plated U.S. FPG: white body; fuseholder without hexnut .110" solder/quick-connect or solder terminals NEW Snap-in FPG FPG FEF Mounting cut-out for FEF 031.1091/1095 * * * * * for panel thickness 1.0 - 3.0mm bayonet fuse carrier - slotted or finger grip solder/quick-connect terminals .187 x .020" (4.8 x 0.5mm) anti-rotation protection (use "D" cut-out) environmental sealing protection IP 40 (sealed from the back) per IEC 529/DIN 40050 * max. power dissipation 4 watts, according to IEC 127-6. For additional values P v in function of T amb , see page 5. * for panel thickness 0.75 - 3.0mm * bayonet fuse carrier - slotted (for finger grip style fuse carrier, use FPG) * solder (90 end terminal) or solder/quick-connect terminals .110 x .020" (2.8 x 0.5mm; end terminal 45 or 90) * anti-rotation protection (use "D" or "notched" cut-out) * environmental sealing protection IP 40 per IEC 529/DIN 40050 * max. power dissipation 4.5 watts, according to IEC 127-6. For additional values P v in function of Tamb , see page 5. UL CSA VDE SEMKO SEV UL recognition (10A/250V) File #E39328 CSA* certification (10A/250V) File #LR38456 VDE approval (10A/250V) File #8596, expert report SEMKO approval (6.3A/250V) File SEV approval (10A/250V) numbers SETI** approval (6.3A/250V) on request CS certification (10A/250V) * CSA data is only valid for panels made of insulating material ** excludes FEF 0031.1161 / 1165 recognition certification approval approval approval (16A/250V) File #E39328 (16A/250V) File #LR38456 (10A/250V) File #77570 File (10A/250V) numbers (10A/250V) on request Order Numbers (see page 102 for fuses) Panel thickness 1.0 - 1.8 mm FPG 3101.0030 Complete fuseholder with fuse carrier (slotted) FPG 3101.0035 Complete fuseholder with fuse carrier (finger grip) Panel thickness 2.0 - 3.0 mm FPG 3101.0031 Complete fuseholder with fuse carrier (slotted) FPG 3101.0036 Complete fuseholder with fuse carrier (finger grip) FPG 3101.8011 Fuse carrier - slotted (spare part only) FPG 3101.8511 Fuse carrier - finger grip (spare part only) Panel thickness 0.75 - 1.5 mm FEF 0031.1091 Complete fuseholder with fuse carrier (slotted); solder terminals FEF 0031.1161 Complete fuseholder with fuse carrier (slotted); solder/ quick-connect terminals Panel thickness 1.8 - 3.0 mm FEF 0031.1095 Complete fuseholder with fuse carrier (slotted); solder terminals FEF 0031.1165 Complete fuseholder with fuse carrier (slotted); solder/ quick-connect terminals FEK 0031.3555 Fuse carrier - slotted (spare part only) 76 Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com FPG Shocksafe Rear Panel Mount Fuseholders For 5 x 20mm Fuses General standards Built according to UL 512, CSA C22.2-39, DIN/ VDE 0820, IEC 257 and 127-6, EN 60257 and 60127-6, SEMKO SS-EN 60257 Insulation resistance More than 10,000 meg-ohms at 500V DC/1 min. Test voltage 50 Hz for 1 minute; 3 kV between contacts, 4 kV from contacts to 7mm panel Contact Resistance Less than .005 ohm at 20 millivolts Ambient temperaturesTamb -40 C to +85 C in function of Pv NEW Vibration resistance Crossing frequency Environmental sealing protection Body material Contact material Patents Options 10-500 Hz; .03 inch (0.75mm) constant amplitude or 10 G constant acceleration 60 Hz per IEC 68-2-6, test Fc IP 40 or 67 per IEC 529/DIN 40050 Temperature resistant thermoplastic (UL 94V-O) Brass, tin-plated U.S. and Worldwide White body; fuseholder without hexnut Speed assembly - pre-wire terminals before mounting FPG add nuts to adjust profile FPG Fixing nut sw 14 * * * * * * rear panel, screw-on mounting pre-wire terminals before mounting for quicker assembly bayonet fuse carrier - slotted or finger grip solder/quick-connect terminals .187 x .020" (4.8 x 0.5mm) anti-rotation protection (use "D" cut-out) environmental sealing protection IP 40 (sealed from the back) or 67 (sealed from the front and back) per IEC 529/DIN 40050 * max. power dissipation 4 watts, according to IEC 127-6. For additional values Pv in function of Tamb , see page 5. UL CSA VDE SEMKO SEV recognition certification approval approval approval (16A/250V) File #E39328 (16A/250V) File #LR38456 (10A/250V) File #77570 File (10A/250V) numbers (10A/250V) on request Order Numbers FPG 3101.0020 Complete fuseholder with fuse carrier (slotted) FPG 3101.0025 Complete fuseholder with fuse carrier (finger grip) FPG 3101.7011 Fuse carrier - slotted (spare part only) FPG 3101.7511 Fuse carrier - finger grip (spare part only) Accessories: (see page 102 for fuses) Sealed version - sealed from the front and back FPG 3101.0120 Complete fuseholder with fuse carrier (slotted, IP 67) FPG 3101.0125 Complete fuseholder with fuse carrier (finger grip, IP 67) FPG 3101.7021 Fuse carrier - slotted (IP 67, spare part only) FPG 3101.7521 Fuse carrier -finger grip (IP 67, spare part only) See page 93 for spare plastic or metal hexnut Accessories: See page 93 for spare plastic or metal hexnut Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com 77 FEU Shocksafe Panel Mount Fuseholders for / x 1 / " or 5 x 20mm Fuses 1 4 1 General standards Built according to UL 512, CSA C22.2-39, DIN/ VDE 0820, IEC 257 and 127-6, EN 60257 and 60127-6, SEMKO SS-EN 60257, SEV 3133 Insulation resistance More than 10,000 meg-ohms at 500V DC / 1 min. Test voltage 50 Hz for 1 minute; 3 kV between contacts, 4 kV from contacts to 7mm panel Contact Resistance Less than .005 ohm at 20 millivolts Ambient temperaturesTamb -40 C to +85 C in function of P v 4 Vibration resistance Crossing frequency Environmental sealing protection Body material Contact material Patents .187" quick-connect terminals (VDE) FI CS 10-500 Hz; .03 inch (0.75mm) constant amplitude or 10 G constant acceleration 60 Hz per IEC 68-2-6, test Fc IP 40 per IEC 529/DIN 40050 Temperature resistant thermoplastic (UL 94V-O) Brass, tin-plated U.S. Solder terminals FEK FEK FEK FEU with 90 end terminal FEU with straight end terminal * * * * * * low profile international fuseholder bayonet fuse carrier - finger grip or slotted quick-connect terminals .187 x .020" (4.8 x 0.5mm) anti-rotation protection (use "D" cut-out) mounting hole: 12.7 mm (0.5") max. power dissipation 5 watts (using 1/4 x 11/4" fuse); 4.5 watts (using 5x20mm fuse), according to IEC 127-6. For additional values Pv in function of Tamb , see page 5. UL CSA VDE SEMKO SEV CS recognition certification approval approval approval certification (20A/250V) File #E39328 (16A/250V) File #LR38456 (10A/250V) File #1691, expert report (10A/250V) File numbers (10A/250V) on request (10A/250V) FEU * * * * * * low profile international fuseholder bayonet fuse carrier - finger grip or slotted solder terminals .138 x .10" (3.5 x 2.5mm) anti-rotation protection (use "D" cut-out) mounting hole 12.7 mm (0.5") max. power dissipation 5 watts (using 1/ 4 x 11/ 4" fuse); 4.5 watts (using 5x20mm fuse), according to IEC 127-6. For additional values Pv in function of Tamb , see page 5. UL CSA VDE SEMKO SEV SETI CS recognition certification approval approval approval approval certification (20A/250V) File #E 39328 (16A/250V) File #LR38456 (10A/250V) File #1691, expert report (10A/250V) File (10A/250V) numbers (6.3A/250V) on request (10A/250V) Order Numbers (see page 102 for fuses) Complete fuseholder with fuse carrier (slotted/grey for 1/ 4 x 1 1/4" fuse) FEU 0031.1680 Complete fuseholder with fuse carrier (slotted/grey for 1 FEU 0031.1699 With 90 end terminal /4 x 11/4" fuse) FEU 0031.1764 With straight end terminal FEU 0031.1753 Complete fuseholder with fuse carrier (slotted/black for Complete fuseholder with fuse carrier (slotted/black for 5x20mm fuse) 5x20mm fuse) FEU 0031.1706 With 90 end terminal FEU 0031.1755 Complete fuseholder with fuse carrier (finger grip/black FEU 0031.1754 With straight end terminal for 1/4 x 11/4" fuse) Complete fuseholder with fuse carrier (finger grip/black for 1/ 4 x 11/ 4" fuse) FEU 0031.1673 Fuseholder body only FEU 0031.1761 With 90 end terminal FEK 0031.1666 Fuse carrier only - slotted/grey for 1/4 x 11/ 4" fuse FEU 0031.1765 With straight end terminal FEK 0031.1663 Fuse carrier only - slotted/black for 5x20mm fuse FEU 0031.1693 Fuseholder body only - 90 end terminal FEK 0031.1667 Fuse carrier only - finger grip/black for 1/ 4 x 11/ 4" fuse FEU 0031.1694 Fuseholder body only - straight end terminal FEK 0031.1666 Fuse carrier only - slotted/grey for 1/4 x 1 1/ 4" fuse FEK 0031.1663 Fuse carrier only - slotted/black for 5x20mm fuse FEK 0031.1667 Fuse carrier only - finger grip/black for 1/ 4 x 1 1 /4" fuse Accessories: see page 93 for square flange, anti-rotation washer, spare plastic or metal nut, face plates, insulation cover 78 Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com FEU Shocksafe Panel Mount Fuseholders for / x 1 / " or 5 x 20mm Fuses 1 4 1 General standards Built according to UL 512, CSA C22.2-39, DIN/ VDE 0820, IEC 257 and 127-6, EN 60257 and 60127-6, SEMKO SS-EN 60257, SEV 3133 Insulation resistance More than 10,000 meg-ohms at 500V DC / 1 min. Test voltage 50 Hz for 1 minute; 3 kV between contacts, 4 kV from contacts to 7mm panel Contact Resistance Less than .005 ohm at 20 millivolts Ambient temperaturesTamb -40 C to +85 C in function of Pv (VDE) 4 Vibration resistance Crossing frequency Environmental sealing protection Body material Contact material Patents .187" quick-connect terminals FI CS 10-500 Hz; .03 inch (0.75mm) constant amplitude or 10 G constant acceleration 60 Hz per IEC 68-2-6, test Fc IP 40 per IEC 529/DIN 40050 Temperature resistant thermoplastic (UL 94V-O) Brass, tin-plated U.S. Solder terminals FEK FEK FEU with 90 end terminal FEU FEU with straight end terminal * * * * * * high profile international fuseholder bayonet fuse carrier - slotted quick-connect terminals .187 x .020" (4.8 x 0.5mm) anti-rotation protection (use "D" cut-out) mounting hole: 12.7 mm (0.5") max. power dissipation 5 watts (using 1/ 4 x 11/ 4" fuse); 4.5 watts (using 5x20mm fuse), according to IEC 127-6. For additional values Pv in function of Tamb , see page 5. UL CSA VDE SEMKO SEV CS recognition certification approval approval approval certification (20A/250V) File #E 39328 (16A/250V) File #LR38456 (10A/250V) File #1691, expert report (10A/250V) File numbers (10A/250V) on request (10A/250V) Order Numbers Complete fuseholder with fuse carrier (slotted/grey for 1/ 4 x 11/ 4" fuse) FEU 0031.1768 With 90 end terminal FEU 0031.1752 With straight end terminal Complete fuseholder with fuse carrier (slotted/black for 5x20mm fuse) FEU 0031.1767 With 90 end terminal FEU 0031.1769 With straight end terminal FEU 0031.1695 FEU 0031.1696 FEK 0031.1666 FEK 0031.1663 Fuseholder body only - 90 end terminal Fuseholder body only - straight end terminal Fuse carrier only - slotted/grey for 1/ 4 x 1 1 /4" fuse Fuse carrier only - slotted/black for 5x20mm fuse * * * * * * high profile international fuseholder bayonet fuse carrier - slotted solder terminals .138 x .10" (3.5 x 2.5mm) anti-rotation protection (use "D" cut-out) mounting hole 12.7 mm (0.5") max. power dissipation 5 watts (using 1/ 4 x 11/ 4" fuse); 4.5 watts (using 5x20mm fuse), according to IEC 127-6. For additional values Pv in function of Tamb , see page 5. UL CSA VDE SEMKO SEV CS recognition certification approval approval approval certification (20A/250V) File #E39328 (16A/250V) File #LR38456 (10A/250V) File #1691, expert report (10A/250V) File (10A/250V) numbers on request (10A/250V) (see page 102 for fuses) FEU 0031.1659 Complete fuseholder with fuse carrier (slotted/grey for 1 /4 x 11/4" fuse) FEU 0031.1751 Complete fuseholder with fuse carrier (slotted/black for 5x20mm fuse) FEU 0031.1653 Fuseholder body only FEK 0031.1666 Fuse carrier only - slotted/grey for 1/ 4 x 11/ 4" fuse FEK 0031.1663 Fuse carrier only - slotted/black for 5x20mm fuse Accessories: see page 93 for square flange, anti-rotation washer, spare plastic or metal nut, face plates, insulation cover Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com 79 FEU Shocksafe Panel Mount Fuseholders for / x 1 / " or 5 x 20mm Fuses 1 4 1 CS 4 (VDE) Built according to UL 512, CSA C22.2-39, DIN/ VDE 0820, IEC 257 and 127-6, EN 60257 and 60127-6, SEMKO SS-EN 60257, SEV 3133 Medical standards Slotted fuse carrier meets tool-only accessibility (FEU 031.1681 only) requirements of medical equipment standards IEC 601-1, BS 5724 part 1, DIN/VDE 0750 part 1 Insulation resistance More than 10,000 meg-ohms at 500V DC / 1 min. Test voltage 50 Hz for 1 minute; 3 kV between contacts, 4 kV from contacts to 7mm panel Contact Resistance Less than .005 ohm at 20 millivolts Ambient temperaturesTamb -40 C to +85 C in function of Pv Vibration resistance 10-500 Hz; .03 inch (0.75mm) constant amplitude or 10 G constant acceleration Crossing frequency 60 Hz per IEC 68-2-6, test Fc Environmental sealing protection IP 40 per IEC 529/DIN 40050 Body material Temperature resistant thermoplastic (UL 94V-O) Contact material Brass, tin-plated Patents U.S. Recessed fuse carrier Finger grip fuse carrier General standards FEU FEK FEK FEU * low profile international fuseholder with recessed fuse carrier (for medical grade fuseholder with captive fuse carrier, see series FBS, page 86) * bayonet fuse carrier - slotted * solder terminals .138 x .10" (3.5 x 2.5mm) * anti-rotation protection (use "D" cut-out) * mounting hole 12.7 mm (0.5") * max. power dissipation 5 watts (using 1/4 x 11/4" fuse); 4.5 watts (using 5x20mm fuse), according to IEC 127-6. For additional values P v in function of Tamb , see page 4. * * * * * * UL CSA VDE SEMKO SEV CS UL CSA VDE SEMKO SEV CS recognition certification approval approval approval certification (20A/250V) File #E 39328 (16A/250V) File #LR38456 (10A/250V) File #1691, expert report (10A/250V) File numbers (10A/250V) on request (10A/250V) low profile international fuseholder bayonet fuse carrier - finger grip solder terminals .138 x .10" (3.5 x 2.5mm) anti-rotation protection (use "D" cut-out) mounting hole: 12.7 mm (0.5") max. power dissipation 4.2 watts (using 1/ 4 x 11/ 4" fuse); 4.5 watts (using 5x20mm fuse), according to IEC 127-6. For additional values Pv in function of Tamb , see page 4. recognition certification approval approval approval certification (20A/250V) File #E39328 (16A/250V) File #LR38456 (10A/250V) File #1691, expert report (10A/250V) File numbers (10A/250V) on request (10A/250V) Order Numbers (see page 102 for fuses) FEU 0031.1758 Complete fuseholder with fuse carrier (slotted/grey for 1 /4 x 11 /4" fuse) FEU 0031.1757 Complete fuseholder with fuse carrier (slotted/black for 5x20mm fuse) FEU 0031.1803 Complete fuseholder with fuse carrier (finger grip/black for 5x20mm fuse) FEU 0031.1804 Complete fuseholder with fuse carrier (finger grip/black for 1/4 x 11/4" fuse) FAU 0031.1681 Fuseholder body only FEK 0031.1666 Fuse carrier only - slotted/grey for 1/4 x 11/4" fuse FEK 0031.1663 Fuse carrier only - slotted/black for 5x20mm fuse FEU 0031.1801 Fuseholder body only FEU 0031.1811 Fuse carrier for 5x20mm fuses FEU 0031.1812 Fuse carrier for 1 /4 x 11/4" fuses Accessories: see page 93 for square flange, anti-rotation washer, spare plastic or metal nut, face plates, insulation cover 80 Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com FEC Shocksafe Panel Mount Fuseholders for / x 1 / " or 5 x 20mm Fuses 1 4 General standards Built according to UL 512, CSA C22.2-39, DIN/ VDE 0820, IEC 257 and 127-6, EN 60257 and 60127-6, SEMKO SS-EN 60257, SEV 3133 Insulation resistance More than 10,000 meg-ohms at 500V DC/1 min. Test voltage 50 Hz for 1 minute; 3 kV between contacts, 4 kV from contacts to panel (8 mm) Contact Resistance Less than .005 ohm at 20 millivolts Ambient temperaturesTamb -40 C to +85 C in function of Pv 1 FI 4 Vibration resistance Crossing frequency Environmental sealing protection Body material Contact material CS 10-500 Hz; .03 inch (0.75mm) constant amplitude or 10 G constant acceleration 60 Hz per IEC 68-2-6, test Fc IP 40 per IEC 529/DIN 40050 Thermoset (UL 94V-O) Brass, tin-plated .250" solder/quick-connect terminals FEC 031.1631 * * * * * * FEK 031.1616 bayonet fuse carrier - finger grip or slotted solder/quick-connect terminals .250 x .032" (6.3 x 0.8mm). Solder terminals available on request. anti-rotation protection (use "D" cut-out) environmental sealing protection IP 40 per IEC 529/DIN 40050 metal nut M16 x 1.5, double pitch max. power dissipation 5 watts (using 5x20mm fuse); 3.2 watts (using 1/4 x 11/4" fuse), according to IEC 127-6. For additional values Pv in function of Tamb , see page 5. UL CSA VDE SEMKO SEV SETI CS 1) FEK 031.1611 / 031.1613 recognition certification approval approval approval approval certification (20A/500V1) File #39328 (12A/500V1) File #LR38456 (10A/500V1) File #45269 (10A/500V1) File (10A/500V1) numbers (6.3A/250V) on request (10A/250V) Fuses according to 250V standards only Order Numbers (see page 102 for fuses) FEC 0031.1631 FEK 0031.1611 FEK 0031.1613 FEK 0031.1616 Fuseholder body Fuse carrier (slotted) for 5 x 20mm fuses Fuse carrier (slotted) for 1/4 x 11/4" fuses Fuse carrier (finger grip) for 1/4 x 11/4" fuses 0098.0044 Accessories: Spare metal nut (optional) See page 93 for screw adapters for quick-connect terminals Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com 81 High Current, Shocksafe Panel Mount Fuseholders for 1/4 x 1 1/4" or 5 x 20mm Fuses General standards Built according to UL 512, CSA C22.2-39, DIN/ VDE 0820, IEC 257 and 127-6, EN 60257 and 60127-6, SEMKO SS-EN 60257, SEV 3133 Insulation resistance More than 10,000 meg-ohms at 500V DC/1 min. Test voltage 50 Hz for 1 minute; 3 kV between contacts, 4 kV from contacts to panel (8 mm) Contact Resistance Less than .005 ohm at 20 millivolts Ambient temperaturesTamb -40 C to +85 C in function of Pv Rated 16A / 30A - for 5 x 20mm fuses Vibration resistance Crossing frequency Environmental sealing protection Body material Contact material 10-500 Hz; .03 inch (0.75mm) constant amplitude or 10 G constant acceleration 60 Hz per IEC 68-2-6, test Fc IP 40 or 67 per IEC 529/DIN 40040 Thermoset (UL 94V-O) Brass, tin-plated FUL FEK current carrying Double start thread M 18.5 x 2 current carrying terminals 6.3 x 0.8 CS Rated 16A-30A - for 1/4 x 11/4" or 5 x 20mm fuses FIZ solder / quick-connect FI quick-connect terminals 6.3 x 0.8 Double start thread M 18.5 x 2 FIZ / FUL Solder terminal * screw type fuse carrier (slotted) * solder / quick-connect terminals .250 x .032" (6.3 x 0.8mm) according to NEMA DC-2 * anti-rotation protection (use "D" cut-out) * environmental sealing protection IP 40 or 67 (watertight from front side according to IEC 529) * max. power dissipation 4.2 watts, according to IEC 127-6. For additional values P v in function of Tamb , see page 5. UL CSA VDE SEMKO SEV SETI CS recognition certification approval approval approval approval certification (30A/250V) File #E 39328 (30A/250V) File #LR 38456 (16A/250V) File #41424 (16A/250V) File (16A/250V) numbers (6.3A/250V) on request (16A/250V) * screw type fuse carrier (slotted) * quick-connect terminals .250 x .032" (6.3 x 0.8mm) according to NEMA DC-2 (solder terminals optional) * anti-rotation protection (use "D" cut-out) * environmental sealing protection IP 40 or 67 (watertight from front side according to IEC 529) * max. power dissipation 4.6 watts (using 1/ 4 x 11/ 4" fuse); 5.2 watts (using 5x20mm fuse), according to IEC 127-6. For additional values P v in function of Tamb , see page 5. UL CSA VDE SEMKO SEV CS recognition certification approval approval approval certification (30A/250V) File #E 39328 (30A/250V) File #LR 38456 (16A/250V) File #41424 (16A/250V) File (16A/250V) numbers on request (16A/250V) Order Numbers (see page 102 for fuses) FIZ 0031.2201 FIZ 0031.2203 Complete fuseholder with fuse carrier, IP 67 (watertight) Complete fuseholder with fuse carrier, IP 40 FEK 0031.2220 FEK 0031.2221 0583.0012 Fuse carrier, IP 67 watertight (spare part only) Fuse carrier, IP 40 (spare part only) Spare metal nut (optional) FUL 0031.2303 FUL 0031.2304 FUL 0031.2307 FUL 0031.2308 FEK 0031.2320 FEK 0031.2321 FEK 0031.2322 FEK 0031.2323 0098.0042 Fuseholder body only, IP 67 (watertight), solder terminals Fuseholder body only, IP 67 (watertight), quick-connect terminals Fuseholder body only, IP 40, solder terminals Fuseholder body only, IP 40, quick-connect terminals Fuse carrier for 1 /4 x 11 /4 " fuses, IP 67 (watertight) Fuse carrier for 1 /4 x 11 /4 " fuses, IP 40 Fuse carrier for 5 x 20mm fuses, IP 67 (watertight) Fuse carrier for 5 x 20mm fuses, IP 40 Spare metal nut (optional) Accessories: See page 93 for insulation cover and screw adapter for quick-connect terminals 82 Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com FPG / FAB Shocksafe PCB Mount Fuseholders For 5 x 20mm Fuses General standards Built according to UL 512, CSA C22.2-39, DIN/ VDE 0820, IEC 257 and 127-6, EN 60257 and 60127-6, SEMKO SS-EN 60257; SEV 3133(FAB) Insulation resistance More than 10,000 meg-ohms at 500V DC/1 min. Test voltage 50 Hz for 1 minute; 3 kV between contacts, 4 kV from contacts to 7mm panel Contact Resistance Less than .005 ohm at 20 millivolts Ambient temperaturesTamb -40 C to +85 C in function of Pv Crossing frequency 60 Hz per IEC 68-2-6, test Fc Vibration resistance Environmental sealing protection Body material FI CS 10-500 Hz; .03 inch (0.75mm) constant amplitude or 10 G constant acceleration IP 40 per IEC 529/DIN 40050 FAB: thermoset (UL 94V-O) FPG: temp. resistant thermoplastic (UL 94V-O) Brass, tin-plated U.S. and Worldwide FPG: white body Contact material Patents Options Non-conductive center post adds stability (VDE) "Kicked" PCB terminals NEW FPG FPG FAB Pins with spacing of 5.08 have the same potential * bayonet fuse carrier - slotted or finger grip * stand-offs for flux-proofing and ease of cleaning * solderability: 235 C / 2 sec. (IEC 68-2-20 Test Ta, method 1) soldering resistance: 350 C / 5 sec. (IEC 68-2-20 Test Tb, method 1B) * environmental sealing protection IP40 per IEC 529/DIN 40050 * wave solderable and washable in aqueous solutions (sealed from the bottom) * max. power dissipation 2.5 watts, according to IEC 127-6. For additional values Pv in function of Tamb , see page 5. * * * * UL CSA VDE SEMKO SEV UL CSA VDE SEMKO SEV SETI CS recognition certification approval approval approval (16A/250V) File #E39328 (16A/250V) File #LR38456 (10A/250V) File #77570 File (10A/250V) numbers (10A/250V) on request Order Numbers FPG 3101.0050 FPG 3101.0055 FPG 3101.8011 FPG 3101.8511 Complete fuseholder with fuse carrier (slotted) Complete fuseholder with fuse carrier (finger grip) Fuse carrier - slotted (spare part only) Fuse carrier - finger grip (spare part only) bayonet fuse carrier - slotted (for finger grip style fuse carrier, use FPG) body designed to protrude through panel opening stand-offs for flux-proofing and ease of cleaning solderability: 235 C / 2 sec. (IEC 68-2-20 Test Ta, method 1) soldering resistance: 350 C / 5 sec. (IEC 68-2-20 Test Tb, method 1B) * environmental sealing protection IP40 per IEC 529/DIN 40050 * wave solderable and washable in aqueous solutions * max. power dissipation 3.2 watts, according to IEC 127-6. For additional values Pv in function of Tamb , see page 5. recognition certification approval approval approval approval certification (12A/250V) File #E39328 (10A/250V) File #LR38456 (6.3A/250V) File #1686, expert report (6.3A/250V) File (6.3A/250V) numbers (6.3A/250V) on request (6.3A/250V) (see page 102 for fuses) FAB 0031.3558 Complete fuseholder with fuse carrier FEK 0031.3555 Fuse carrier (spare part only) Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com 83 FPG / FAF Shocksafe PCB Mount Fuseholders For 5 x 20mm Fuses General standards Built according to UL 512, CSA C22.2-39, DIN/ VDE 0820, IEC 257 and 127-6, EN 60257 and 60127-6, SEMKO SS-EN 60257; SEV 3133(FAF) Insulation resistance More than 10,000 meg-ohms at 500V DC/1 min. Test voltage 50 Hz for 1 minute; 3 kV between contacts, 4 kV from contacts to 7mm panel Contact Resistance Less than .005 ohm at 20 millivolts Ambient temperaturesTamb -40 C to +85 C in function of Pv Vibration resistance Crossing frequency Environmental sealing protection Body material Contact material Patents Options (VDE) FI CS 10-500 Hz; .03 inch (0.75mm) constant amplitude or 10 G constant acceleration 60 Hz per IEC 68-2-6, test Fc IP 40 or 54 per IEC 529/DIN 40050 temperature resistant thermoplastic (UL 94V-O) Brass, tin-plated U.S. and Worldwide FPG: white body Extra PCB terminals add stability Front seal (IP 54) or unsealed NEW FPG 3101.0045 FAF FPG 3101.0040 Pns with spacing of 5.08 have the same potential * * * * bayonet fuse carrier - slotted or finger grip body designed to protrude through panel opening stand-offs for flux-proofing and ease of cleaning solderability: 235 C / 2 sec. (IEC 68-2-20 Test Ta, method 1) soldering resistance: 350 C / 5 sec. (IEC 68-2-20 Test Tb, method 1B) * environmental sealing protection IP40 per IEC 529/DIN 40050 * wave solderable and washable in aqueous solutions (sealed from the bottom) * max. power dissipation 2.5 watts, according to IEC 127-6. For additional values P v in function of Tamb , see page 5. UL CSA VDE SEMKO SEV recognition certification approval approval approval * * * * bayonet fuse carrier - slotted (for finger grip style fuse carrier, use FPG) body designed to protrude through panel opening stand-offs for flux-proofing and ease of cleaning solderability: 235 C / 2 sec. (IEC 68-2-20 Test Ta, method 1) soldering resistance: 350 C / 5 sec. (IEC 68-2-20 Test Tb, method 1B) * environmental sealing protection IP40 / 54 per IEC 529/DIN 40050 * wave solderable and washable in aqueous solutions * max. power dissipation 3.4 watts, according to IEC 127-6. For additional values Pv in function of Tamb , see page 5. UL CSA VDE SEMKO SEV SETI CS (16A/250V) File #E39328 (16A/250V) File #LR38456 (10A/250V) File #77570 File (10A/250V) numbers (10A/250V) on request recognition certification approval approval approval approval certification (12A/250V) File #E39328 (10A/250V) File #LR38456 (6.3A/250V) File #1698, expert report (6.3A/250V) File (6.3A/250V) numbers (6.3A/250V) on request (6.3A/250V) Order Numbers (see page 102 for fuses) FPG 3101.0040 Complete fuseholder with fuse carrier (slotted) FPG 3101.0045 Complete fuseholder with fuse carrier (finger grip) FPG 3101.8011 Fuse carrier - slotted (spare part only) FPG 3101.8511 Fuse carrier - finger grip (spare part only) FAF 0031.3751 Complete fuseholder with fuse carrier, IP 40 Sealed version - sealed from the front FAF 0031.3753 Complete fuseholder with fuse carrier, IP 54 FEK 0031.3555 Fuse carrier, IP 40 (spare part only) FEK 0031.3562 Fuse carrier, IP 54 (spare part only) 84 Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com FAU / FAC Shocksafe PCB Mount Fuseholders for 1/4 x 1 1/4" or 5 x 20mm Fuses General standards Built according to UL 512, CSA C22.2-39, DIN/ VDE 0820, IEC 257 and 127-6, EN 60257 and 60127-6, SEMKO SS-EN 60257, SEV 3133 Insulation resistance More than 10,000 meg-ohms at 500V DC/1 min. Test voltage 50 Hz for 1 minute; 3 kV between contacts, 4 kV from contacts to panel (5mm FAU, 24mm FAC) Contact Resistance Less than .005 ohm at 20 millivolts Ambient temperaturesTamb -40 C to +85 C in function of Pv FI (VDE) Vibration resistance Crossing frequency Environmental sealing protection Body material Contact material Patents CS 10-500 Hz; .014 inch (0.35mm) constant amplitude or 5 G constant acceleration 60 Hz per IEC 68-2-6, test Fc IP 40 per IEC 529/DIN 40050 Temperature resistant thermoplastic (UL 94V-O) Brass, tin-plated U.S. "Kicked" PCB terminals "Kicked" PCB terminals FEK FAC FAU FEK FEK 0.5 * * * * bayonet fuse carrier - slotted or finger grip sleeve designed to protrude through panel opening stand-offs for flux-proofing and ease of cleaning solderability: 235C / 2 sec. (IEC 68-2-20 Test Ta, method 1) soldering resistance: 350C / 5 sec. (IEC 68-2-20 Test Tb, method 1B) * wave solderable and washable in aqueous solutions * max. power dissipation 4.1 watts (using 1/ 4 x 11/ 4" fuse); 3.8 watts (using 5x20mm fuse), according to IEC 127-6. For additional values Pv in function of Tamb , see page 5. * * * * UL CSA VDE SEMKO SEV SETI CS UL CSA VDE SEMKO SEV SETI CS recognition certification approval approval approval approval certification (16A/250V) File #E 39328 (16A/250V) File #LR 38456 (10A/250V) File #1688, expert report (6.3A/250V) File (6.3A/250V) numbers (6.3A/250V) on request (6.3A/250V) bayonet fuse carrier - slotted or finger grip round body designed to protrude through panel opening stand-offs for flux-proofing and ease of cleaning solderability: 235C / 2 sec. (IEC 68-2-20 Test Ta, method 1) soldering resistance: 350C / 5 sec. (IEC 68-2-20 Test Tb, method 1B) * wave solderable and washable in aqueous solutions * max. power dissipation 4.5 watts, according to IEC 127-6. For additional values Pv in function of Tamb , see page 5. recognition certification approval approval approval approval certification (16A/250V) File #E 39328 (16A/250V) File #LR 38456 (10A/250V) File #1690, expert report (6.3A/250V) File (6.3A/250V) numbers (6.3A/250V) on request (6.3A/250V) Order Numbers (see page 102 for fuses) FAU 0031.3581 Complete fuseholder with fuse carrier (slotted/grey for FAC 0031.3822 Complete fuseholder with fuse carrier (slotted/grey for 1 1 /4 x 1 1/ 4" fuse) /4 x 1 1/ 4" fuse) FAC 0031.3821 Complete fuseholder with fuse carrier (slotted/black for FAU 0031.3571 Complete fuseholder with fuse carrier (slotted/black for 5x20mm fuse) 5x20mm fuse) FAC 0031.3823 Complete fuseholder with fuse carrier (finger grip/black FAU 0031.3583 Complete fuseholder with fuse carrier (finger grip/black for 1/4 x 1 1 /4" fuse) for 1/4 x 1 1 /4" fuse) FAU 0031.3577 Fuseholder body only FAC 0031.3804 Fuseholder body only FEK 0031.1666 Fuse carrier only - slotted/grey for 1/ 4 x 1 1 /4" fuse FEK 0031.1666 Fuse carrier only - slotted/grey for 1/ 4 x 1 1 /4" fuse FEK 0031.1663 Fuse carrier only - slotted/black for 5x20mm fuse FEK 0031.1663 Fuse carrier only - slotted/black for 5x20mm fuse FEK 0031.1667 Fuse carrier only - finger grip/black for 1/ 4 x 1 1/4" fuse FEK 0031.1667 Fuse carrier only - finger grip/black for 1/ 4 x 1 1/4" fuse Accessories: see page 93 for square flange, anti-rotation washer, face plates Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com 85 FBS Medical Grade, Shockproof Fuseholders for 5 x 20mm Fuses General standards Medical standards Test voltage Ambient temperatures Built according to UL 512, CSA C22.2-39, DIN/ VDE 0820, IEC 257 and 127-6, EN 60257 and 60127-6, SEMKO SS-EN 60257 Slotted fuse carrier meets tool-only accessibility requirements of medical equipment standards IEC 601-1, BS 5724 part 1, DIN/VDE 0750 part 1 50 Hz / 1 min.; 3 kV between contacts, 4 kV from contacts to 7mm panel Storage: -25 C to +85 C Operating: +40 C for touchable surfaces, +85 C for untouchable surfaces CS Insulation resistance More than 10,000 meg-ohms at 500VDC / 1 min. Contact Resistance Less than .005 ohm at 20 millivolts Vibration resistance 10-500 Hz; .014 inch (0.35mm) constant amplitude or 5 G constant acceleration Crossing frequency 60 Hz per IEC 68-2-6, test Fc Environmental sealing protection IP 40 per IEC 529/DIN 40050 Body material Temperature resistant thermoplastic (UL 94V-O) Contact material Brass, tin-plated Patents US and Worldwide FBS FBS captive fuse carrier, slotted or finger grip FBS FBS double start thread double start thread mechanical stabilizing pins electrical contacts * panel mount for 5 x 20mm fuses * captive bayonet fuse carrier - finger grip or slotted * shockproof according to IEC 529 test probe; live parts are completely innaccessible to a probe measuring 1mm in diameter and 100mm in length (see page 3 for more information about shock safety) * solder/quick-connect terminals .187 x .020" (4.8 x 0.5mm) * anti-rotation protection (use "D" cutout) * mounting hole: 12.7 mm (0.5") * max. power dissipation 2.5 watts, according to IEC 127-6. For additional values P v in function of T amb , see page 5. * pcb mount for 5 x 20mm fuses: * captive bayonet fuse carrier - finger grip or slotted * shockproof according to IEC 529 test probe; live parts are completely innaccessible to a probe measuring 1mm in diameter and 100mm in length (see page 3 for more information about shock safety) * body designed to protrude through panel opening * stand-offs for flux-proofing and ease of cleaning * solderability: 350C/2 sec. (IEC 68-2-20 Test Ta, method 2) soldering resistance: 350C/10 sec. (IEC 68-2-20 Test Tb, method 2) * max. power dissipation 2.5 watts, according to IEC 127-6. For additional values P v in function of T amb , see page 5. UL CSA VDE SEMKO SEV CS UL CSA VDE SEMKO SEV CS recognition certification approval approval approval certification (10A/250V) File #E 39328 (10A/250V) File #LR 38456 (10A/250V) File #62305 (10A/250V) File (10A/250V) numbers on request (10A/250V) recognition certification approval approval approval certification (10A/250V) File #E 39328 (10A/250V) File #LR 38456 (10A/250V) File #62305 (10A/250V) File numbers (10A/250V) on request (10A/250V) Order Numbers (see page 102 for fuses) FBS 0031.3911 Complete fuseholder with fuse carrier (finger grip) FBS 0031.3991 Complete fuseholder with fuse carrier (finger grip) FBS 0031.3901 Complete fuseholder with fuse carrier (slotted) FBS 0031.3981 Complete fuseholder with fuse carrier (slotted) Accessories: See page 93 for square flange, anti-rotation washer, spare plastic or metal nut, face plates, insulation cover 86 Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com Board Mount Fuse Blocks - Surface Mount Blister tray package OMH 125V 7090 OGN accepts 7.4 x 3.1mm SMT fuse accepts 7 x 2mm Melf SMT fuse accepts 5 x 20mm fuse Solder pad solder pad Blister tray Spool Solder pad 14 Blister tape max. dimensions for removal of cover * max. ambient temp. -40 C to +85 C * vibration resistance: frequency range 10-500 Hz (1000Hz) amplitude, 0.75mm resp. accel. 100m/ s2 (10g), IEC 68-2-6, test Tc * shock resistance: 981m/s2 (100g), 11ms (IEC 68-227) * climatic category: HPF (DIN 40040) * reflow and vapor phase soldering * power dissipation: 1.186 watts/ 136.4C; 0.724 watts/94C; 0.532 watts/75.9C * body: temp. resistant thermoplastic (UL 94V-O); contacts: tin plated copper alloy * * * * max. ambient temp. -55C to +85C suitable for reflow and vapor phase soldering power dissipation:max. 0.9 watts body: temperature resistant thermoplastic (UL 94V-O); contacts: bronze, tin plated When used with fuses other than the Schurter Melf shown below, the suitability of these fuse blocks should be evaluated in the end use application. 3.5A max. recommended RMS current at 63V. 5A RMS current at 12V requires a minimum 10mm wide pcb trace. Standards: UL 512; CSA C22.2-39 Standards: UL 512; CSA C22.2-39 UL UL CSA recognition (5A/125V) file #E39328 certification (5A/125V) file #LR38456 CSA recognition (7A/125V) file #E41738 certification (7A/125V) file # LR 23151-12 * low profile fuse block with insulation walls, for 5 x 20mm fuse * J-bend SMT terminals * max. power dissipation 4 watts * contact resistance: < .005 ohm at 20 mV (IEC 127-6) * vibration resistance: frequency range 10-500 Hz, cross over frequency 60 Hz; < 60 Hz constant amplitude of 0.75mm, > 60 Hz constant acceleration 10g * dielectric strength: >3kV, 50 Hz/1 min. * max. ambient temp. -25C to +85C * solderability: 235 C/2s (IEC 68-2-20/Ta); reflow and vapor phase * soldering heat resistance: 350 C/5s (IEC 68-220/Tb) * body: temperature resistant thermoplastic PETP (UL 94V-O); contacts: copper-alloy, tin-plated * oxygen index rating: 33% * for optional cover, see page 93 Standards: UL 512, CSA C22.2-39, DIN/VDE 0820, IEC 257, EN 60257 UL CSA VDE See pages 130-133 for the OMF 63V and 125V surface mount fuses See page 136 for the MELF 125V surface mount fuse Order Numbers 0031.7701.11 packaged loose 0031.7701.22 750 pieces on tape & reel 0031.7701.23 1500 pieces on tape and reel 7090.9010.03 (see page 102 for fuses) packaged loose (231786) 7090.9010.55 (231786) SEMKO SEV recognition (10A/250V) file #E39328 certification (10A/250V) file #LR38456 approval (10A/250V) file #70428 approval (10A/250V) approval (10A/250V) 500 pieces on tape and reel 0031.8221 0031.8222 packaged loose 500 pieces - tray package for auto insertion Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com 87 Board Mount Fuse Blocks - Through-hole CS 7090 OGN OG OGD accepts 7 x 2mm Melf SMT fuse accepts 5 x 20mm fuse accepts 1/4 x 11/4 " fuse accepts 5 x 20mm or 1/4 x 11/4 " fuse 35.4 pcb drill hole O 1.4mm (+0.1) max. dimensions for removal of cover * max. ambient temp. Tamb -55C to +85C * suitable for reflow and vapor phase soldering * power dissipation max. 0.9 watts * body: temperature resistant thermoplastic (UL 94V-O); contacts: bronze, tin plated When used with fuses other than the Schurter Melf shown below, the suitability of these fuse blocks should be evaluated in the end use application. Standards: UL 512; CSA C22.2-39 UL CSA recognition (7A/125V) file #E41738 certification (7A/125V) file # LR 23151-12 * low profile fuse block with insulation walls, for 5 x 20mm fuse * "kicked" pcb terminals * max. power dissipation 4 watts * requires M 2.5 mounting screw (according to ISO 7046; not supplied) * contact resistance: < .005 ohm at 20 mV (IEC 127-6) * vibration resistance: frequency range 10-500 Hz, cross over frequency 60 Hz; < 60 Hz constant amplitude of 0.75mm, > 60 Hz constant acceleration 10g * dielectric strength: >3kV, 50 Hz/1 min. * Max. ambient temp. -25C to +85C * solderability: 235C/2s (IEC 68-2-20) * soldering heat resistance: 350 C/5s (IEC 68-2-20/Tb) * body: temp. resistant thermoplastic PETP (UL 94V-O) * oxygen index rating: 33% * contacts: brass, tin-plated * for optional cover, see page 93 * printed circuit board mountable for 1/4 x 11/4" fuse * test voltage: 4 kV, 50 Hz/1min. * -25C to +85C ambient temp. * insulation resistance: > 10,000 meg-ohms at 500V DC * contact resistance: < .004 ohm at 20 mV * body: thermoset (UL 94V-O) * max. power dissipation 4 watts * contacts: German silver * international fuse block, accepts 1/4 x 11 /4" fuse in upper or 5 x 20 mm fuse in lower portion * impossible to have two fuses installed at the same time * insulation walls reduce the risk of electric shock * "kicked" pcb terminals * clip ends prevent axial fuse movement * max. power dissipation 4 watts * contact resistance: < .005 ohm at 20 mV (IEC 127-6) * vibration resistance: freq. range 10500 Hz, cross over freq. 60 Hz; < 60 Hz constant amplitude of 0.75mm, > 60 Hz constant acceleration 10g * Max. ambient temp. -25C to +85C * solderability: 235C/2s (IEC 68-2-20) * soldering heat resistance: 350 C/10s (IEC 68-2-20/Tb) * body: temperature resistant thermoplastic PBTP (UL 94V-0); contacts: brass, tin-plated * U.S. and worldwide patents Standards: UL 512, CSA C22.2-39, DIN/ VDE 0820, IEC 257, EN 60257 Standards: UL 512, CSA C22.2-39, IEC 257, EN 60257 Standards: UL 512, CSA C22.2-39, DIN/ VDE0820, IEC257, EN60257 UL CSA VDE See page 136 for the MELF 125V surface mount fuse SEMKO SEV recognition (10A/250V) file #E39328 certification (10A/250V) file #LR38456 approval (10A/250V) file #70428 approval (10A/250V) approval (10A/250V) UL CSA CS 1) recognition (16A/500V1) file # E39328 certification (10A/250V) file #LR38456 certification (10A/250V) Fuses according to 250V standards only UL CSA VDE SEMKO SEV 1) recognition (16A/500V1 ) file #E39328 certification (16A/250V) file #LR38456 approval (10A/250V) file #70428 approval (10A/250V) approval (10A/250V) Fuses according to 250V standards only Order Numbers (see page 102 for fuses) 7090.9020.03 packaged loose (231787) 7090.9020.55 (231787) 500 pieces on tape & reel OGN 0031.8201 22.5 mm pin spacing OGN 0031.8211 25.0 mm pin spacing OG 0031.8002 OGD 0031.8231 replacements forOG 031.8001/OGB 031.8101 88 Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com Board Mount Fuse Blocks - Screw Mount CS CS UHB UH RSH accepts 5 x 20mm fuse accepts 5 x 20mm fuse accepts 1/4 x 11/4 " fuse * fuse block for 5 x 20mm fuse * solder terminals * test voltage: 50 Hz/1min.; > 3 kV between metal front plate and terminals * insulation resistance: > 10,000 meg-ohms at 500V DC * contact resistance: < .005 ohm at 20 mV * soldering heat resistance: max. 350C/5sec. * body material: fiberglass-reinforced polycarbonate * contacts: brass, tin-plated * requires M3 mounting screw (not supplied) * power dissipation on request * for optional cover, see page 93 * fuse block for 5 x 20mm fuse * single units or break-off strips of ten unit * solder/quick-connect terminals .187 x .020" (4.8 x 0.5mm) * test voltage: 3 kV, 50 Hz/1 min. * -25C to +85C ambient temp. * body: thermoset (UL 94V-O) contacts: nickel silver * requires M3 mounting screw (not supplied) * power dissipation on request * fuse block for 1 /4 x 11 /4" fuse * single units or break-off strips of ten units * solder/quick-connect terminals .187 x .020" (4.8 x 0.5mm) * test voltage: 3 kV, 50 Hz/1 min. * -25C to +85C ambient temp. * insulation resistance: > 10,000 meg-ohms at 500V DC * contact resistance: < .004 ohm at 20 mV * body: thermoset (UL 94V-O) * contacts: nickel silver * requires M3 mounting screw (not supplied) * max. power dissipation 4 watts Standards: UL 512, CSA C22.2-39, IEC 257 Standards: UL 512, CSA C22.2-39, IEC 257 Standards: UL 512, CSA C22.2-39, IEC 257, EN 60257 UL UL CSA recognition (6.3A/250V) file #E39328 certification (6.3A/250V) file #LR38456 CSA CS recognition (10A/250V) file #E39328 certification (10A/250V) file #LR38456 certification (10A/250V) UL CSA CS 1) Order Numbers UHB 0031.5101 recognition (16A/500V1) file # E39328 certification (10A/250V) file #LR38456 certification (10A/250V) Fuses according to 250V standards only (see page102 for fuses) UH 0031.5001 single unit RSH 0031.6001 single unit UH 0031.5010 strip of ten units RSH 0031.6010 strip of ten units Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com 89 Board Mount Holders for Microfuses NEW CS FMS 125V FMR 125V FMS 250V accepts 125V microfuse - vertical mount accepts 125V microfuse - horizontal mount accepts 250V microfuse * through-hole mount fuseholder * for vertical mounting of MSF 125V microfuse * body: temp. resistant thermoplastic (UL 94V-O); contacts: brass, silver-plated * through-hole mount fuseholder * for horizontal mounting of MSF 125V microfuse * body: temp. resistant thermoplastic (UL 94V-O); contacts: brass, silver-plated * through-hole mount fuseholder * accepts MSF, MST or MXT 250V microfuses * rated 5A/250V * body: temp. resistant thermoplastic (UL 94V-O); contacts: brass, tin-plated outside; 1 - 1.5 gold inside Standards: UL 512, CSA C22.2-39 Standards: UL 512, CSA C22.2-39 Standards: UL 512, CSA C22.2-39 UL UL CSA CS recognition (5A/125V) file #E39397 certification (5A/125V) file #LR38456 certification (5A/125V) See page 139 for the MSF 125V microfuse CSA recognition (5A/125V) file #E39328 certification (5A/125V) file #LR38456 See page 139 for the MSF 125V microfuse See pages 140-142 for the MSF/ MST / MXT 250V microfuses Order Numbers (see page 102 for fuses) FMS 0031.7501 for vertical mount microfuse 90 FMR 0031.7505 for horizontal mount microfuse FMS 0031.7601 Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com Board Mount Fuse Clips OG OG 7170 OG accepts 5 x 20mm fuse accepts 5 x 20mm fuse accepts 5 x 20mm fuse accepts 1/4 x 11/4 " or 5 x 20mm fuses footprint for 5 x 20mm fuses footprint for 1 /4 x 11 /4 " fuses * international fuse clip, built to accept 1/ 4 x 11/ 4" or 5 x 20mm fuses * change in footprint needed for different fuse size * contacts: bronze, tin-plated * fuse clip for 5 x 20 mm fuse * "kicked" terminals for optimum wave-soldering * current rating: 10A/250V * contacts: brass, tin-plated * fuse clip for 5 x 20 mm fuse * contacts: OG 0751.0052: bronze, tin-plated OG 0751.0062: brass, tin-plated * for optional cover, see page 93 Standards: UL 512 and IEC 257 Standards: UL 512 and IEC 257 Standards: UL 512 and IEC 257 UL recognition1) (6.3A/250V) file # E39328 UL recognition (10A/500V1 ) file # E39328 * * * * fuse clip for 5 x 20mm fuse screw-on pcb mount solder terminals contacts: bronze 1) 1) Order Numbers OG 0751.0110 Fuses according to 250V standards only part number 0751.0052 only OG 0751.0052 (see page102 for fuses) 7170.0430 OG 0751.0056 (231014) OG 0751.0062 Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com 91 Board Mount Fuse Clips OG OG 7170 7170 accepts 1/4 x 11/4 " or 5 x 20mm fuses accepts 1/4 x 11/4 " or 5 x 20mm fuses accepts 10.3 x 38mm fuse accepts 10.3 x 38mm fuse without support clip * international fuse clip, accepts 1/ 4 x 1 1/4" fuse in upper or 5 x 20 mm fuse in lower portion * impossible to have two fuses installed at the same time * clip ends prevent axial movement of the fuse * OG clip built in accordance with IEC 65, subclause 14.5.2, VDE 0860 IEC 257, UL 512 * no change in footprint needed for different fuse size * U.S. patented * international fuse clip, accepts 1/ 4 x 1 1/4" fuse in upper or 5 x 20 mm fuse in lower portion * impossible to have two fuses installed at the same time * clip ends prevent axial movement of the fuse * OG clip built in accordance with IEC 65, subclause 14.5.2, VDE 0860 IEC 257, UL 512 * no change in footprint needed for different fuse size * U.S. patented * fuse clip accepts 10.3 x 38mm fuse * for printed circuit board mounting * hole for optional securing screw * contacts: bronze, electroplated * for 10.3 x 38mm quick-acting fuse see series A3BK, page 155 Standards: UL 512 and IEC 257 Standards: UL 512 and IEC 257 UL recognition (20A) file # E41738 UL recognition (16A/500V1) file #E39328 1) with support clip * fuse clip accepts 10.3 x 38mm fuse * screw-on pcb mount * screw, plate and nut included * support clip recommended, part number 7170.0130 (ordered separately) * for 10.3 x 38mm quick-acting fuse see series A3BK, page 155 (Max. voltage depends on end use application) Fuses according to 250V standards only Order Numbers (see page 102 for fuses) OG 0751.0099 92 fuse clip, tinplated bronze OG 0751.0100 fuse clip, tinplated brass 7170.0470 7170.0520 (231660) (23634) Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com Accessories For Fuseholders / Fuse Blocks / Fuse Clips Square flange Anti-rotation washer Can be used with all fuseholders with a 0.5" mounting hole For securing fuseholders with a 0.5" mounting hole without having to punch a complicated "D" cut-out Metal nut made from nickel-plated brass. Thread: M 12.7 x 1.5 double pitch Plastic nut, fiberglass reinforced polycarbonate. Thread: M12.7 x 1.5, double pitch. Fuseholders may be supplied with clear or black plastic nut. Conversion to black nut in progress. Fuseholder faceplate with self adhesive backing for fuseholders with a 0.5" mounting hole Fuseholder faceplate with self adhesive backing for fuseholders with a 5/ 8" or 3 /4" mounting hole Cover for fuse block UHB 0031.5101 and fuse clips OG 0751.0052/0062 OGH 0853.9561: Macrolon (UL94 V-O), max. 1.6 Watts power dissipation OGH 0853.9562: Vitrex (UL94 V-O), max. 3.15 Watts power dissipation metal plastic (Macrolon) Order Numbers QF 0853.0066 VSI 0696.0033 0098.0026 0098.0093 Cover for fuse blocks OGN 0031.8201/8211/ 8221 Screw-adapter for quickconnect terminals .250 x .032", straight (6.3 x 0.8mm) Insulation boot for fuseholders FEU and FBS panel mount. Made of flexible plastic (UL 94V-O) Metal Plastic Macrolon (UL 94V-O), max. 1.6 Watts power dissipation 0880.0001 0880.0002 0.5" 5 /8" or 3/4" shown above with photos Insulation boot for fuseholders FIZ/FUL. Made from UL recognized component plastic (UL file #E41871) Insulation boot for fuseholders FEU. Made from UL recognized component plastic (UL file #E41871) 0859.0046 0859.0041 0859.0042 0859.0042 0859.0043 Order Numbers OGH 0853.0551 0750.0141 0859.0081 for FEU 031.1653 for FEU 031.1673 for FEU 031.1681 for FEU 031.1694 Schurter, Inc. * Phone 707-778-6311 * Fax 707-778-6401 * E-mail info@schurterinc.com * Website http://www.schurterinc.com 93