Datasheet BR & SU Series UL 489 (Branch rated) Circuit Breakers UL1077 Supplementary Protectors NEW Compared to traditional fuse installation, the UL489 and CSA compliant circuit breakers listed here assist with the complex task of selecting correct types and characteristics and offer a less bulky installation solution. Our range of miniature, molded-case circuit breakers, in combination with our accessories for factory or on-site installation, offer enhanced control and monitoring capabilities. Installation kits include all parts and instructions to make the on-site job easy. We supply UL489 compliant 1, 2 and 3-pole-type circuit breakers from 0.5 to 60 Ampere and with type C and D characteristics. Attachments such as neutral switches, auxiliary contacts and shunt trips are also available for this system. All accessories for modern busbar installations are available in compliance with the relevant UL standards. Weidmuller, Canada 10 Spy Court Markham, Ontario L3R 5H6 Telephone: (800) 268-4080 Facsimile: (877) 300-5635 Email: info1@weidmuller.ca Website: www.weidmuller.ca Weidmuller, Mexico Blvd. Hermanos Serdan 698, Col. San Rafael Oriente Puebla, Puebla, Mexico C.P. 72029 Telephone: 01 222 2686267 Facsimile: 01 222 2686219 Email: clientes@weidmuller.com.mx Website: www.weidmuller.com.mx Weidmuller, United States 821 Southlake Blvd. Richmond, Virginia 23236 Telephone: (800) 849-9343 Facsimile: (804) 379-2593 Email: info@weidmuller.com Website: www.weidmuller.com Branch Circuit Breakers Application Schematic Power Circuit UL489 UL489 Power Circuit Power Transformer Control Circuit Control Transformer UL1077 UL489 Power Transformer UL489 UL489 UL1077 UL489 UL489 UL1077 UL489 M M Outlet Sizing of main branch circuit protector according to table 430.52 in NEC(R) Fixed mounted cabinet /panel heater (resistive loads) * Dual Element (Time Delay) Fuse Maximum fuse = largest motor FLA x 175 % + FLA of all other motors and general loads in group * Inverse Time Breaker Maximum circuit breaker = largest motor FLA x 250 % + FLA of all other motors and general loads in group (for other fuse/breaker types see table 430.52) 2 Branch Circuit Breakers Branch Circuit Breakers AC Version, C and D Characteristics Single Pole - D Curve Single Pole - C Curve Current Ratings (amps) Part No. Description Part No. Description 0.5 BR1D05AC Branch / 1P Cct Brkr / D Curve / 0.5A BR1C05AC Branch / 1P Cct Brkr / C Curve / 0.5A 1 BR1D1AC Branch / 1P Cct Brkr / D Curve / 1A BR1C1AC Branch / 1P Cct Brkr / C Curve / 1A 2 BR1D2AC Branch / 1P Cct Brkr / D Curve / 2A BR1C2AC Branch / 1P Cct Brkr / C Curve / 2A 3 BR1D3AC Branch / 1P Cct Brkr / D Curve / 3A BR1C3AC Branch / 1P Cct Brkr / C Curve / 3A 5 BR1D5AC Branch / 1P Cct Brkr / D Curve / 5A BR1C5AC Branch / 1P Cct Brkr / C Curve / 5A 10 BR1D10AC Branch / 1P Cct Brkr / D Curve / 10A BR1C10AC Branch / 1P Cct Brkr / C Curve / 10A 15 BR1D15AC Branch / 1P Cct Brkr / D Curve / 15A BR1C15AC Branch / 1P Cct Brkr / C Curve / 15A 20 BR1D20AC Branch / 1P Cct Brkr / D Curve / 20A BR1C20AC Branch / 1P Cct Brkr / C Curve / 20A 25 BR1D25AC Branch / 1P Cct Brkr / D Curve / 25A BR1C25AC Branch / 1P Cct Brkr / C Curve / 25A 30 BR1D30AC Branch / 1P Cct Brkr / D Curve / 30A BR1C30AC Branch / 1P Cct Brkr / C Curve / 30A 40 BR1D40AC Branch / 1P Cct Brkr / D Curve / 40A BR1C40AC Branch / 1P Cct Brkr / C Curve / 40A 50 BR1D50AC Branch / 1P Cct Brkr / D Curve / 50A BR1C50AC Branch / 1P Cct Brkr / C Curve / 50A 60 BR1D60AC Branch / 1P Cct Brkr / D Curve / 60A BR1C60AC Branch / 1P Cct Brkr / C Curve / 60A Double Pole - D Curve Double Pole - C Curve Current Ratings (amps) Part No. Description Part No. Description 0.5 BR2D05AC Branch / 2P Cct Brkr / D Curve / 0.5A BR2C05AC Branch / 2P Cct Brkr / C Curve / 0.5A 1 BR2D1AC Branch / 2P Cct Brkr / D Curve / 1A BR2C1AC Branch / 2P Cct Brkr / C Curve / 1A 2 BR2D2AC Branch / 2P Cct Brkr / D Curve / 2A BR2C2AC Branch / 2P Cct Brkr / C Curve / 2A 5 BR2D5AC Branch / 2P Cct Brkr / D Curve / 5A BR2C5AC Branch / 2P Cct Brkr / C Curve / 5A 10 BR2D10AC Branch / 2P Cct Brkr / D Curve / 10A BR2C10AC Branch / 2P Cct Brkr / C Curve / 10A 15 BR2D15AC Branch / 2P Cct Brkr / D Curve / 15A BR2C15AC Branch / 2P Cct Brkr / C Curve / 15A 20 BR2D20AC Branch / 2P Cct Brkr / D Curve / 20A BR2C20AC Branch / 2P Cct Brkr / C Curve / 20A 25 BR2D25AC Branch / 2P Cct Brkr / D Curve / 25A BR2C25AC Branch / 2P Cct Brkr / C Curve / 25A 30 BR2D30AC Branch / 2P Cct Brkr / D Curve / 30A BR2C30AC Branch / 2P Cct Brkr / C Curve / 30A 40 BR2D40AC Branch / 2P Cct Brkr / D Curve / 40A BR2C40AC Branch / 2P Cct Brkr / C Curve / 40A 50 BR2D50AC Branch / 2P Cct Brkr / D Curve / 50A BR2C50AC Branch / 2P Cct Brkr / C Curve / 50A 60 BR2D60AC Branch / 2P Cct Brkr / D Curve / 60A BR2C60AC Branch / 2P Cct Brkr / C Curve / 60A Triple Pole - D Curve Triple Pole - C Curve Current Ratings (amps) Part No. Description Part No. Description 1 BR3D1AC Branch / 3P Cct Brkr / D Curve / 1A BR3C1AC Branch / 3P Cct Brkr / C Curve / 1A 2 BR3D2AC Branch / 3P Cct Brkr / D Curve / 2A BR3C2AC Branch / 3P Cct Brkr / C Curve / 2A 5 BR3D5AC Branch / 3P Cct Brkr / D Curve / 5A BR3C5AC Branch / 3P Cct Brkr / C Curve / 5A 10 BR3D10AC Branch / 3P Cct Brkr / D Curve / 10A BR3C10AC Branch / 3P Cct Brkr / C Curve / 10A 15 BR3D15AC Branch / 3P Cct Brkr / D Curve / 15A BR3C15AC Branch / 3P Cct Brkr / C Curve / 15A 20 BR3D20AC Branch / 3P Cct Brkr / D Curve / 20A BR3C20AC Branch / 3P Cct Brkr / C Curve / 20A 25 BR3D25AC Branch / 3P Cct Brkr / D Curve / 25A BR3C25AC Branch / 3P Cct Brkr / C Curve / 25A 30 BR3D30AC Branch / 3P Cct Brkr / D Curve / 30A BR3C30AC Branch / 3P Cct Brkr / C Curve / 30A 40 BR3D40AC Branch / 3P Cct Brkr / D Curve / 40A BR3C40AC Branch / 3P Cct Brkr / C Curve / 40A 50 BR3D50AC Branch / 3P Cct Brkr / D Curve / 50A BR3C50AC Branch / 3P Cct Brkr / C Curve / 50A 60 BR3D60AC Branch / 3P Cct Brkr / D Curve / 60A BR3C60AC Branch / 3P Cct Brkr / C Curve / 60A 3 Branch Circuit Breakers Accessories for Branch Circuit Breakers Module Type of Contact Contacts Weight g / Each Packing Unit Part No. Auxiliary contact, for mounting on the right 1/2 1 auxiliary contact 1NO 35 6 BAU10 1/2 2 auxiliary contacts 1NO + 1NC 40 6 BAU11 14 BAU10 13 24 12 BAU11 23 11 Standards UL489 and CSA-22.2 Nr. 5-09 Rated operating currents 10 A /240 V AC 3 A / 110 V DC 1 A / 220 V DC Minimum contact load 1 mA at 24 V DC Conductor cross sections Type of conductor *) min. max. Single wire 1.0 mm2 (AWG18) 2.5 mm2 (AWG14) Stranded wire 1.0 mm2 (AWG18) 1.5 mm2 (AWG16) Stranded wire with ferrule 1.0 mm (AWG18) 1.5 mm2 (AWG16) Torque max. 0.8 Nm (7 lb.in) *) Stripped length 8 - 9 mm 2 ( ) values in brackets = measurement units for North America Lock-off/Lock-on device 4 Weight g / Each Packing Unit 2 10 Part No. LD10 Branch Circuit Breakers Accessories for Branch Circuit Breakers Mounting Instructions of Accessories Applies to BNS... and BST: The accessory devices BNS... and BST can be installed on the right or left. Mounting 1. Bring the blue knobs of all devices into the "OFF" position 2. Remove grey cover from the switching device and attachment 3. Insert drive plate between the switching device and BNS... or BST 4. Insert connecting pin into the knob (insertion depth approx. 7 mm) 5. Combine switching device and BNS... or BST 6. Screw the devices together (observe correct screw length) Mounting screw 34 mm (see accessories page 6) Neutral switch/ Shunt trip Switching device Neutral switch/ Shunt trip Auxiliary contact Applies to BAU... The auxiliary contact BAU... can only be installed on the right. Installation 1. Flick the blue switches of all devices to the "OFF" position 2. Remove the grey cover from the switching device and attachment 3. Combine switching device and BAU... 4. Insert connection screws and connect the two devices by turning the screws 90 5. After installation, close and open to check correct operation Switching device Auxiliary contact Applies to all switching devices BNS..., BST and BAU... The load and mains can be connected into either the top or bottom (Line/Load Reversible). Design of the terminals * Optical detection of screw position * Increased breaking resistance if the screwdriver becomes jammed * Universal connecting terminals, suitable for connecting all known cable lugs such as ring or forked cable lugs and pin terminals * Ring cable lugs can be connected by opening the flap and removing the connecting screw * Can also be used for applications that require ring cable lugs (e.g. nuclear power stations) * DIN EN 50274, VDE 0660-514 compliant protection against contact with live parts is fully guaranteed 1. Box terminal for solid conductors flexible conductors with or without cable lug 2. Screw terminal for forked cable lug 3. Screw terminal for ring cable lug (ring tongue) 5 Branch Circuit Breakers Busbar and Accessories for Branch Circuit Breakers (UL 489) BTPC100 BPF35 BPF50 Criteria: * for MCBs according to UL489 * available in 1-3 phase types * addable system * Designed for a load up to 115A * suitable accessories as connection terminals and contact protection * Busbars may not be shortened Description Part No. Busbar/Branch Protection/1ph/6Poles BB106 Busbar/Branch Protection/1ph/12Poles BB112 Busbar/Branch Protection/1ph/18Poles BB118 Busbar/Branch Protection/1ph/12Poles BB206 Busbar/Branch Protection/2ph/12Poles BB212 Busbar/Branch Protection/2ph/18Poles BB218 Busbar/Branch Protection/3ph/6Poles BB306 Busbar/Branch Protection/3ph/12Poles BB312 Busbar/Branch Protection/3ph/18Poles BB318 PwrFeed Term - 35mm BPF35 PwrFeed Term - 50mm BPF50 Touch Protection 3Caps BTPC100 Mounting screw 34 mm to connect the auxiliary contact and shunt trip or neutral switch to the switching devices Packing Unit 10 pieces 6 Part No. MS34 Touch-protection caps to cover the connecting screws on the switching devices, neutral switches and shunt trips for increased touch protection Packing Unit 100 pieces Part No. TPC Branch Circuit Breakers Technical Data for Branch Circuit Breakers (AC) C D Application Lighting Wiring protection Control circuits Business equipment Appliances Motors low inrush Transformers Power supplies Heaters Motors high inrush Reactive load Number of poles 1 - 3; 1 + N; 3 + N Standards UL489 and CSA-22.2 Nr. 5-09 Interrupting capacity 10 kA Back-up fuse 10 kA interrupting capacity none Rated voltage AC 50/60 Hz 0.3 - 32 A 277 / 480 V Rated voltage AC 50/60 Hz 40 - 63 A 240 V Rated current range Test currents Characteristic * 0.5 - 60 A 0.5 - 60 A Thermal not tripping I1 (A) > 1 h 1.05 x In 1.05 x In Thermal tripping I2 (A) < 1 h 1.35 x In 1.35 x In Electromagnetic not tripping I4 (A) > 0.1 s 5 x In 10 x In Electromagnetic tripping I5 (A) < 0.1 s 10 x In 16 x In Reference calibration temperature of the thermal tripping 40 C Influence of the ambient temperature on the thermal release: Decrease of the current values with higher ambient temperature and increase with lower temperatures of approximately 5 % per 10 C difference in temperature Frequency range of the electromagnetic trip 16 to 60 Hz With higher frequencies, the electromagnetic tripping values increase by approximately a factor of 1.1 at 100 Hz; 1.2 at 200 Hz; 1.3 at 300 Hz; 1.4 at 400 Hz; 1.5 for DC Ambient temperature -25 C to +55 C Storage temperature -40 C to +70 C Device depth according to DIN 43880 68 mm Mechanical life 10,000 switching cycles (ON / OFF) Protection cover Finger safe and safe to back of hand according to DIN EN 50274, VDE 0660-514 Degree of protection acc. EN / IEC 60529 IP20 Installation position any Mounting DIN-rail according to DIN EN 60715 35 mm Lockability The handle can be secured against manual switching in the on and off position by a lead seal Climatic resistance Humid heat constant according to DIN EN 60068-2-78 Humid heat cycle according to DIN EN 60068-2-30 Vibration resistance > 15 g according to DIN EN 60068-2-59 during a load with I1 Resistance to mechanical shocks 25 g 11 ms Approvals - BR... items pending Approvals - BAU..., BNS..., BST... items pending Approvals - BB..., BPF..., BTPC... items pending * Other switching devices in B and Z characteristics available on request Interrupting capacity acc. to IEC 60947-2, DIN EN 60947-2 Characteristic * C, D 1pole 0.5 - 60 A 240 V 15 kA 2pole / 3pole 0.5 - 60 A 415 V 15 kA 2pole / 3pole 40 - 60 A 415 V 10 kA 7 Branch Circuit Breakers Technical Data for Branch Circuit Breakers Dimension drawings product range BR Conductor Cross Sections Box Terminal Bottom Box Terminal Top Type of conductor *) max. min. max. min. Single wire 35 mm2 (AWG2) 1.0 mm2 (AWG18) 25 mm2 (AWG3) 1.0 mm2 (AWG18) Multiple wire 35 mm2 (AWG2) 16 mm2 (AWG6) 25 mm2 (AWG3) 16 mm2 (AWG6) Stranded wire 25 mm (AWG3) 1.0 mm2 (AWG18) 16 mm2 (AWG6) 1.0 mm2 (AWG18) Stranded wire with ferrule 16 mm2 (AWG6) 1.0 mm2 (AWG18) 16 mm2 (AWG6) 1.0 mm2 (AWG18) 2 Busbar cable lug up to 3 mm thickness up to 1.5 mm thickness Combined, conductor and busbar or cable lug up to 35 mm2 and up to 2 mm thickness not possible Torque max. 2.5 Nm (22.2 lb.in) *) Stripped lengths: 12 - 14 mm at the bottom, 10 - 12 mm at the top ( ) values in brackets = measurement units for North America Copper conductor with sheath insulation for 60/75 C Internal Resistance for Product Range BR 8 Trip Characteristic Rated Current [A] C [Ohm] D [Ohm] 0.3 16.8620 16.8620 0.5 6.8540 6.0009 1.0 1.7000 1.7560 1.6 0.5870 0.5870 2.0 0.4190 0.4190 3.0 0.2020 0.2020 4.0 0.1090 0.1090 5.0 0.0654 0.0654 6.0 0.0528 0.0491 8.0 0.0278 0.0240 10 0.0216 0.0187 12 0.0084 0.0085 13 0.0084 0.0085 15/16 0.0085 0.0076 20 0.0067 0.0064 25 0.0050 0.0041 30/32 0.0032 0.0027 40 0.0025 0.0022 50 0.0019 0.0018 60 0.0018 0.0017 1-pole 2-pole 3-pole Branch Circuit Breakers Curves for Branch Circuit Breakers AC Product Range BR 1.05-1.35xl N 60 40 10 10 4 1 1 10 10 4 4 1 1 0,4 0,4 C D C 10 -1 Seconds 4x10 -2 10 -2 4x10 -3 10 -3 Product Range BR 1.05-1.35xl N 60 40 4 10 -1 Seconds Tripping time t Minutes Minutes Tripping time t D 4x10 -2 10 -2 4x10 -3 1 2 3 4 5 6 8 10 16 20 40 Multiple of rated current C and D characteristic AC BR models ln = 0.5 - 10 A 100 10 -3 1 2 3 4 5 6 8 10 16 20 40 100 Multiple of rated current C and D characteristic AC BR models ln = 12 - 60 A 9 Supplementary Circuit Breakers Supplementary Circuit Breakers Our range of UL1077 supplementary protectors can be used where additional protection is required in control circuits. Combined with the accessories it also offers enhanced monitoring and control capabilities. Single Pole - D Curve Single Pole - C Curve Current Ratings (amps) Part No. Description Part No. Description 0.5 SU1D05AC Suppl / 1P Cct Brkr / D Curve / 0.5A SU1C05AC Suppl / 1P Cct Brkr / C Curve / 0.5A 1 SU1D1AC Suppl / 1P Cct Brkr / D Curve / 1A SU1C1AC Suppl / 1P Cct Brkr / C Curve / 1A 2 SU1D2AC Suppl / 1P Cct Brkr / D Curve / 2A SU1C2AC Suppl / 1P Cct Brkr / C Curve / 2A 3 SU1D3AC Suppl / 1P Cct Brkr / D Curve / 3A SU1C3AC Suppl / 1P Cct Brkr / C Curve / 3A 5 SU1D5AC Suppl / 1P Cct Brkr / D Curve / 5A SU1C5AC Suppl / 1P Cct Brkr / C Curve / 5A 10 SU1D10AC Suppl / 1P Cct Brkr / D Curve / 10A SU1C10AC Suppl / 1P Cct Brkr / C Curve / 10A 15 SU1D15AC Suppl / 1P Cct Brkr / D Curve / 15A SU1C15AC Suppl / 1P Cct Brkr / C Curve / 15A 20 SU1D20AC Suppl / 1P Cct Brkr / D Curve / 20A SU1C20AC Suppl / 1P Cct Brkr / C Curve / 20A 25 SU1D25AC Suppl / 1P Cct Brkr / D Curve / 25A SU1C25AC Suppl / 1P Cct Brkr / C Curve / 25A 30 SU1D30AC Suppl / 1P Cct Brkr / D Curve / 30A SU1C30AC Suppl / 1P Cct Brkr / C Curve / 30A 40 SU1D40AC Suppl / 1P Cct Brkr / D Curve / 40A SU1C40AC Suppl / 1P Cct Brkr / C Curve / 40A 50 SU1D50AC Suppl / 1P Cct Brkr / D Curve / 50A SU1C50AC Suppl / 1P Cct Brkr / C Curve / 50A 60 SU1D60AC Suppl / 1P Cct Brkr / D Curve / 60A SU1C60AC Suppl / 1P Cct Brkr / C Curve / 60A Double Pole - D Curve Double Pole - C Curve Current Ratings (amps) Part No. Description Part No. Description 0.5 SU2D05AC Suppl / 2P Cct Brkr / D Curve / 0.5A SU2C05AC Suppl / 2P Cct Brkr / C Curve / 0.5A 1 SU2D1AC Suppl / 2P Cct Brkr / D Curve / 1A SU2C1AC Suppl / 2P Cct Brkr / C Curve / 1A 2 SU2D2AC Suppl / 2P Cct Brkr / D Curve / 2A SU2C2AC Suppl / 2P Cct Brkr / C Curve / 2A 5 SU2D5AC Suppl / 2P Cct Brkr / D Curve / 5A SU2C5AC Suppl / 2P Cct Brkr / C Curve / 5A 10 SU2D10AC Suppl / 2P Cct Brkr / D Curve / 10A SU2C10AC Suppl / 2P Cct Brkr / C Curve / 10A 15 SU2D15AC Suppl / 2P Cct Brkr / D Curve / 15A SU2C15AC Suppl / 2P Cct Brkr / C Curve / 15A 20 SU2D20AC Suppl / 2P Cct Brkr / D Curve / 20A SU2C20AC Suppl / 2P Cct Brkr / C Curve / 20A 25 SU2D25AC Suppl / 2P Cct Brkr / D Curve / 25A SU2C25AC Suppl / 2P Cct Brkr / C Curve / 25A 30 SU2D30AC Suppl / 2P Cct Brkr / D Curve / 30A SU2C30AC Suppl / 2P Cct Brkr / C Curve / 30A 40 SU2D40AC Suppl / 2P Cct Brkr / D Curve / 40A SU2C40AC Suppl / 2P Cct Brkr / C Curve / 40A 50 SU2D50AC Suppl / 2P Cct Brkr / D Curve / 50A SU2C50AC Suppl / 2P Cct Brkr / C Curve / 50A 60 SU2D60AC Suppl / 2P Cct Brkr / D Curve / 60A SU2C60AC Suppl / 2P Cct Brkr / C Curve / 60A 10 Supplementary Circuit Breakers Triple Pole - D Curve Triple Pole - C Curve Current Ratings (amps) Part No. Description Part No. Description 1 SU3D1AC Suppl / 3P Cct Brkr / D Curve / 1A SU3C1AC Suppl / 3P Cct Brkr / C Curve / 1A 2 SU3D2AC Suppl / 3P Cct Brkr / D Curve / 2A SU3C2AC Suppl / 3P Cct Brkr / C Curve / 2A 5 SU3D5AC Suppl / 3P Cct Brkr / D Curve / 5A SU3C5AC Suppl / 3P Cct Brkr / C Curve / 5A 10 SU3D10AC Suppl / 3P Cct Brkr / D Curve / 10A SU3C10AC Suppl / 3P Cct Brkr / C Curve / 10A 15 SU3D15AC Suppl / 3P Cct Brkr / D Curve / 15A SU3C15AC Suppl / 3P Cct Brkr / C Curve / 15A 20 SU3D20AC Suppl / 3P Cct Brkr / D Curve / 20A SU3C20AC Suppl / 3P Cct Brkr / C Curve / 20A 25 SU3D25AC Suppl / 3P Cct Brkr / D Curve / 25A SU3C25AC Suppl / 3P Cct Brkr / C Curve / 25A 30 SU3D30AC Suppl / 3P Cct Brkr / D Curve / 30A SU3C30AC Suppl / 3P Cct Brkr / C Curve / 30A 40 SU3D40AC Suppl / 3P Cct Brkr / D Curve / 40A SU3C40AC Suppl / 3P Cct Brkr / C Curve / 40A 50 SU3D50AC Suppl / 3P Cct Brkr / D Curve / 50A SU3C50AC Suppl / 3P Cct Brkr / C Curve / 50A 60 SU3D60AC Suppl / 3P Cct Brkr / D Curve / 60A SU3C60AC Suppl / 3P Cct Brkr / C Curve / 60A Switching Devices Supplementary Protector Rated Current in A Rated Voltage Volt AC Weight g / Each Packing Unit 150 5 Test Currents * Electromagnetic Not Tripping I4 A Tripping I5 A 400 700 Part No. Neutral switch 0.5 - 60 277/480 SNS63A * additional electromagnetic protection 11 Supplementary Circuit Breakers Accessories for Supplementary Circuit Breakers Auxiliary contact Module Type of Contact Contacts Part No. 1/2 1/2 1 auxiliary contact 2 auxiliary contacts 1NO 1NO + 1NC SAU10 SAU11 Weight g / Each 35 40 Packing Unit 10 10 24 12 14 SAU11 SAU10 23 13 11 Standards Acc. to IEC 60947-5-1, DIN EN 60947-5-1, VDE 0660-200, UL508 Rated operating currents 10 A /240 V AC 3 A / 110 V DC 1 A / 220 V DC Minimum contact load 1 mA at 24 V DC Conductor cross sections Type of conductor *) min. max. Single wire Stranded wire 1.0 mm2 (AWG18) 1.0 mm2 (AWG18) 2.5 mm2 (AWG14) 1.5 mm2 (AWG16) Stranded wire with ferrule 1.0 mm2 (AWG18) Torque 1.5 mm2 (AWG16) max. 0.8 Nm (7 lb.in) *) Stripped length 8 - 9 mm Shunt trip Module Rated Operating Voltage Max. Operating Current at Part No. Un (t < 10 ms) 1 24 V UC 0.6 A 1 110 - 240 V UC, 415 V AC 0.25 A at 110 V Weight g / Each Packing Unit SST24V 105 5 SST110V 105 5 0.5 A at 240 V 0.58 A at 277 V Lock-off/Lock-on device 12 Packing Unit Weight g / Each 10 2 Part No. LD10 Supplementary Circuit Breakers Accessories for Supplementary Circuit Breakers Mounting Instructions of Accessories Applies to SNS63A and SAU...: Mounting screw 34 mm (see accessories page 6) The accessory devices SNS63A and SAU... can be installed on the right or left. The auxiliary contact H... UM can only be installed on the right. Mounting: 1. Flick the blue switches of all devices to the "OFF" position 2. Remove the grey cover from the switching device and attachment 3. Insert the drive plate between the switching device and SNS63A and SAU... 4. Insert the connecting pin into the switch (insertion depth approx. 7 mm) 5. Combine switching device and SNS63A and SAU... 6. Screw devices together(observe correct screw length) Neutral switch/ Shunt trip Switching device Neutral switch/ Shunt trip Auxiliary contact Applies to SAU...: The auxiliary contact SAU... can only be installed on the right. Installation: 1. Flick the blue switches of all devices to the "OFF" position 2. Remove the grey cover from the switching device 3. Combine switching device and SAU... 4. Insert connection screws and connect the two devices by turning the screws by 90 5. After installation close and open to check operation Switching device Auxiliary contact Applies to all switching devices SAU..., SNS and SST... Design of the terminals * Optical detection of screw position * Increased breaking resistance if the screwdriver becomes jammed * Universal connecting terminals, suitable for connecting all known cable lugs such as ring or forked cable lugs and pin terminals * Ring cable lugs can be connected by opening the flap and removing the connecting screw * Can also be used for applications that require ring cable lugs (e.g. nuclear power stations) * DIN EN 50274, VDE 0660-514 compliant protection against contact with live parts is fully guaranteed 1. Box terminal for solid conductors flexible conductors with or without cable lug 2. Screw terminal for forked cable lug 3. Screw terminal for ring cable lug (ring tongue) 13 Supplementary Circuit Breakers Busbar and Accessories for Supplementary Circuit Breakers (UL 1077) Produktbild / Product picture / Photo du produit SEC1P 1-10 AWG Copper wire Z2 Z2 max 50Ib-in STPC 1 SPF35 2 3 Z2 SPF95 1. Z2 1-4/0 AWG Copper wire 1.1. max 175 Ib-in 1-10 AWG Copper wire SPF50 1.2. max 50Ib-in 1.3. 1-14 AWG Copper wire max 35Ib-in SECMP SPF35 General Data SPF35 Ue f Uimp le Ue f Uimp le Infeed at the start of the busbar Infeed at the center of the busbar 1000 V AC/DC 50/60 Hz - 115 A #1-10 AWG 60C Cu SPF50 1000V AC/DC 50/60 Hz - 115 A Ue f Uimp le #1-14 AWG 75C Cu 0.56 in 0.56 in All SB models SPF95 1P 600 V AC 1000V DC 2/3P 600V AC 50/60 Hz - 18mm / 25mm 80A@40 C / 100A@30C 160A@40C / 200A@30C Description Busbar/Supplementary Protection/1ph/6Poles Busbar/Supplementary Protection/1ph/12Poles Busbar/Supplementary Protection/Aux/1ph/37Poles Busbar/Supplementary Protection/2ph/12Poles Busbar/Supplementary Protection/2ph/18Poles Busbar/Supplementary Protection/Aux/2ph/38Poles Busbar/Supplementary Protection/3ph/12Poles Busbar/Supplementary Protection/3ph/39Poles Busbar/Supplementary Protection/Aux/3ph/48Poles Ue f Uimp le 600V AC/DC 50/60 Hz - 200 A #1-4/0 AWG 75C Cu 1 in Part No. SB106 SB112 SB1A37 SB212 SB218 SB2A38 SB312 SB339 SB3A48P PwrFeed Term - 35mm SPF35 PwrFeed Term - 50mm SPF50 PwrFeed Term - 95mm SPF95 Touch Protection 5Caps Endcap/1P busbars Endcap/multi-P busbars 14 STPC SEC1P SECMP Supplementary Circuit Breakers Technical Data for Supplementary Circuit Breakers Characteristic C D Application Lighting,Control circuits Wiring protection, Business equipment Appliances Control transformers Power supplies Reactive load Number of poles 1 - 3; 1 + N; 3 + N Standards UL1077 and CSA-22.2 No.235 Interrupting capacity see data sheet for use in the USA and Canada Current limiting class 3 Max. back-up fuse see data sheet for use in the USA and Canada Rated voltage AC 277 / 480 V Test currents Rated current range 0.5 - 60 A 0.5 - 60 A Thermal not tripping I1 (A) > 1 h 1.13 x In 1.13 x In Thermal tripping I2 (A) < 1 h 1.45 x In 1.45 x In Electromagnetic not tripping I4 (A) > 0,1 s 5 x In 10 x In Electromagnetic tripping I5 (A) < 0,1 s 10 x In 16 x In Reference calibration temperature of the thermal tripping 30 C + 5 C Influence of the ambient temperature on the thermal release: Decrease of the current values with higher ambient temperature and increase with lower temperatures of approximately 5% per 10C difference in temperature Frequency range of the electromagnetic trip 16 2/3 to 60 Hz Ambient temperature -25 C to +55 C Storage temperature -40 C to +70 C Device depth according to DIN 43880 68 mm Mechanical live 10,000 cycles (ON / OFF) Protection cover Finger safe and safe to back of hand according to DIN EN 50274/ VDE0660-514 Insulation group acc. to DIN/VDE 0110 C at 250 V AC B at 400 V AC Degree of protection acc. to EN/IEC 60529 IP20 Installation position any Mounting DIN-rail according to DIN EN 60715 35 mm Lockability The handle can be secured against manual switching in the on and off position by a lead seal Climatic resistance Humid heat constant according to DIN EN 60068-2-78 Humid heat cycle according to DIN EN 60068-2-30 Vibration resistance > 15 g according to DIN EN 60068-2-59 during a load with I1 Resistance to mechanical shocks 25g 11ms Approvals - SU... items pending Approvals - SAU..., SNS..., SST... items pending Approvals - SB..., SPF..., STPC..., SEC... items pending 15 Supplementary Circuit Breakers Technical Data for Supplementary Circuit Breakers Conductor cross sections Box Terminal Bottom Box Terminal Top Type of conductor *) max. min. max. min. Single wire 35 mm2 (AWG2) 1 mm2 (AWG18) 25 mm2 (AWG3) 1 mm2 (AWG18) Multiple wire 35 mm2 (AWG2) 16 mm2 (AWG6) 25 mm2 (AWG3) 16 mm2 (AWG6) Stranded wire 25 mm2 (AWG3) 1 mm2 (AWG18) 16 mm2 (AWG6) 1 mm2 (AWG18) Stranded wire with ferrule 16 mm2 (AWG6) 1 mm2 (AWG18) 16 mm2 (AWG6) 1 mm2 (AWG18) Busbar cable lug up to 3 mm thickness Torque up to 1.5 mm thickness max. 2.3 Nm (20 lb.in) *) Stripped length: bottom 12 - 14 mm, top 10 - 12 mm Interrupting capacity and maximum back-up fuse for use in the USA and Canada Characteristic C and D Standards Interrupting capacity at rated voltage Ambient temperature 40 C UL1077 and CSA-22.2 No.235 Number of poles Maximum rated voltage [V] Rated current [A] Interrupting capacity [kA] Maximum back-up fuse [A] 1/1+N 277 0.5 - 10 10 70 A 1/1+N 277 12 - 60 10 4 x In 2/3/3+N 480 0.5 - 10 10 70 A 2/3/3+N 480 12 - 60 10 4 x In Internal resistance for Product Range SU Rated Current [A] Trip Characteristic C [Ohm] D [Ohm] 0.5 6.8540 6.0009 1.0 1.7000 1.7560 2.0 0.4190 0.4190 3.0 0.2020 0.2020 4.0 0.1090 0.1090 5.0 0.0654 0.0654 6.0 0.0528 0.0491 8.0 0.0278 0.0240 10 0.0216 0.0187 12/13 0.0084 0.0085 15/16 0.0085 0.0076 20 0.0067 0.0064 25 0.0050 0.0041 30/32 0.0032 0.0027 40 0.0025 0.0022 50 0.0019 0.0018 60 0.0018 0.0017 16 Supplementary Circuit Breakers Curves for Supplementary Circuit Breakers 60 40 Minutes Minutes 1.13-1.45 x l 1.13-1.45 x l N 60 40 10 4 4 1 10 10 4 4 1 1 0.4 0,4 0,4 0.4 B C D C D 4x10-2 Seconds 10 B 10 -1 4x10-2 Seconds 10 1 10 -1 N -2 -3 4x10 10 -2 -3 4x10 10 -3 10 -3 1 2 3 4 5 6 8 10 16 20 40 1 100 Multiple of rated current 2 3 4 5 6 8 10 20 40 100 Multiple of rated current B, C and D characteristic ln = 0.5 - 10 A SU models B, C and D characteristic ln = 12 - 60 A SU models Dimension Drawings for SU models 1-pole 2-pole 3-pole 17 18 Subject to technical changes * 04/13 * 0.0M * LIT1221