RN73H high heat resistance, high reliability metal film chip resistor resistors EU features * High precision type 0.05% is available with standard products * Improved moisture resistance by glass passivation layer * High reliability and high stability at elevated temperatures * Low current noise * Products with lead-free terminations meet EU RoHS requirements * Rated ambient temperature: 85C, rated up to +155C * AEC-Q200 Qualified: 0402 (1E), 0603 (1J), 0805 (2A), 1206 (2B), 1210 (2E) dimensions and construction c Type c W Solder Plating Ni Plating t d Protective Coating Resistive Inner Electrode Film Ceramic Substrate 1J (0603) .063.008 .031.004 .012.004 .012.004 .018.004 (1.60.2) (0.80.1) (0.30.1) (0.450.1) (0.30.1) 2A (0805) .079.008 .049.008 .016.008 (2.00.2) (1.250.2) (0.40.2) 2B (1206) .063.008 .126.008 (1.60.2) (3.20.2) .098.008 (2.50.2) 80 % Rated Power 80 % Rated Power 100 40 t +.002 -.004 +0.05) -0.1 1E (0402) 100 60 +.004 -.002 +0.1 (1.0-0.05 ) .039 2E (1210) Derating Curve Dimensions inches (mm) W c d L (Inch Size Code) L .010 .020.002 .010.004 (0.50.05) (0.250.1) (0.25 .02.012 (0.50.3) .012 (0.3 .016 (0.4 .014.002 (0.350.05) +.008 -.004 +0.2 ) -0.1 .02.004 (0.50.1) +.008 -.004 +0.2 ) -0.1 .024.004 (0.60.1) 1E (90C) 1J (95C) 2A (100C) 2B, 2E (110C) 60 40 20 20 0 -60 -40 -55 -20 0 80 100 120 85 Ambient Temperature (C) 20 40 60 140 0 -60 -40 -55 160 155 For resistors operated at an ambient temperature of 85C or above, a power rating shall be derated in accordance with the above derating curve. ordering information RN73H 2B Type Size 1E: 0.063W 1J: 0.1W 2A: 0.125W 2B: 0.25W 2E: 0.25W T Termination Material T: Sn G: Au (1E, 1J only) -20 0 20 100 120 40 60 80 90 95 110 Terminal Part Temperature (C) 140 160 155 For resistors operated terminal part temperature of described for each size or above, a power rating shall be derated in accordance with derating curve. Please refer to "Introduction of the derating curves based on the terminal part temperature" in the beginning of our catalog before use. TD Packaging TP: 0402 only: 7" 2mm pitch punched paper TD: 0603, 0805, 1206, 1210: 7" 4mm pitch punched paper TDD: 0603, 0805, 1206, 1210: 10" paper tape TE: 0805, 1206, 1210: 7" embossed plastic TED: 0805, 1206, 1210: 10" embossed plastic For further information on packaging, please refer to Appendix A 1002 Nominal Resistance 3 significant figures + 1 multiplier "R" indicates decimal on value <100 B 25 Resistance Tolerance A: 0.05% B: 0.1% C: 0.25% D: 0.5% F: 1.0% T.C.R. (ppm/C) 05 10 25 50 100 Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 40 10/23/15 KOA Speer Electronics, Inc. * 199 Bolivar Drive * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com RN73H applications and ratings Rated Power Rated T.C.R. Part Terminal Rating Ambient (ppm/C) Designation Part @ 85C Temp. Max. (A0.05%) Temp. 10 -- 1/16W 85C 90C 25 -- RN73H1E (.063W) -- 50 5 100 - 59k 10 47 - 59k 1/10W RN73H1J 47 - 59k 25 85C 95C (.10W) 50 -- 100 -- 5 100 - 100k 47 - 100k 10 1/8W RN73H2A (.125W) 25 85C 100C 47 - 100k -- 50 -- 100 100 - 300k 5 47 - 300k 10 1/4W RN73H2B (.25W) 47 - 300k 25 85C 110C -- 50 -- 100 100 - 510k 10 25 51 - 510k 1/4W RN73H2E (.25W) -- 50 85C 110C 100 * No marking on E-192 values -- Resistance Range () E-24, E-96, E-192* (B0.1%) (C0.25%) (D0.5%) (F1.0%) 47 - 10k 47 - 300k 47 - 300k 100 - 59k 47 - 360k 15 - 1M 15 - 1M -- 100 - 100k 47 - 1M 15 - 1.5M 15 - 1.5M -- 100 - 300k 47 - 1M 15 - 1M 15 - 1M -- 100 - 510k 15 - 1M 15 - 1M -- 47 - 10k 47 - 300k 47 - 300k -- 47 - 360k 15 - 1M 15 - 1M -- -- 47 - 10k 47 - 300k 10 - 300k -- 47 - 360k 10 - 1M 10 - 1M 10 - 1M -- 47 - 10k 47 - 300k 10 - 300k -- 47 - 360k 10 - 1M 10 - 1M 10 - 1M -- 47 - 1M 15 - 1.5M 15 - 1.5M -- -- 47 - 1M 15 - 1M 15 - 1M -- 100 - 510k 15 - 1M 15 - 1M -- 47 - 1M 10 - 1.5M 10 - 1.5M 10 - 1.5M -- 47 - 1M 10 - 1M 10 - 1M 10 - 1M 47 - 1M 10 - 1.5M 10 - 1.5M 10 - 1.5M -- 47 - 1M 10 - 1M 10 - 1M 10 - 1M 100 - 510k 10 - 1M 10 - 1M 100 - 510k 10 - 1M 10 - 1M 10 - 1M 10 - 1M Maximum Working Voltage Maximum Overload Voltage 50V 100V 75V 150V 150V 300V 200V 400V 200V 400V Operating Temperature: -55C to +155C environmental applications Performance Characteristics Parameter Resistance T.C.R. Overload (Short time) Resistance to Solder Heat Requirement R (%+0.05) Limit Typical Within specified tolerance -- Within specified T.C.R. -- 0.05% 0.01% 0.05%* 0.01% Rapid Change of Temperature 0.1%* 0.02% Moisture Resistance Endurance at 85C High Temperature Exposure 0.1%* 0.1%* 0.1%* 0.05% 0.03% 0.05% Test Method 25C +25C/+125C: T.C.R. +5 (x10-6K); +15C/-55C and +25C/+155C: other Rated Voltage x 2.5 or Max. overload voltage, whichever is less for 5 seconds 260C 5C, 10 seconds 1 second 1E, 1J, 2A: -55C (30 minutes), +155C (30 minutes), 1000 cycles 2B, 2E: -55C (30 minutes), +155C (30 minutes), 500 cycles 85C 2C, 85%5%RH, 1000 hours; 1.5 hr ON, 0.5 hr OFF cycle 85C 2C, 3000 hours, 1.5 hr ON, 0.5 hr OFF cycle +155C, 1000 hours * Depends on resistance value, please contact KOA Speer for details. Precautions for Use * The properly and electrostatically measured taping materials are used for the components, but attention should be paid to the fact that there is some danger the parts absorb on the top tapes to cause a failure in the mounting and the parts are destructed by static electricity (1J, 2A, 2B, 2E: 1kV and more, 1E: 0.5kV and more at Human Body Model 100pF, 1.5k) to change the resistance in the conditions of an excessive dryness or after the parts are given vibration for a long time as they are packaged on the tapes. Similarly, care should be given not to apply the excessive static electricity when mounting on the boards. * Ionic impurities such as flux etc. that are attached to these products or those mounted onto a PCB, negatively affect their moisture resistance, corrosion resistance, etc. The flux may contain ionic substances like chlorine, acid, etc. while perspiration and saliva include ionic impurities like sodium (Na), chlorine (Cl-) etc. Therefore these kinds of ionic substances may induce electrical corrosion when they invade into the products. Either thorough washing or using RMA solder and flux are necessary since lead free solder contains ionic substances. Washing process is needed, before putting on moisture proof material in order to prevent electrical corrosion. * Please pay attention that the top of an iron does not direct touch to the components. There is a risk that may cause a change in resistance. Take care that another risk may happen that the protecting coat is carbonized in an instant when touched directly by the top of the iron, also climatic-proof for electric corrosion or insulation of protecting coat may be dropped down. Be sure not to give high temperature on the top of the iron as it will degrade the protecting coat. * Avoid storing components under direct sun rays, high temperature/humidity. Direct sun rays will cause quality change of taping and difficulty of keeping appropriate peeling strength. 5~35C/35~75%RH, there is no deterioration of solderability for 12 months, but take special care for storing, because condensation, dust, and toxic gas like hydrogen sulfide, sulfurous acid gas, hydrogen chloride, etc. may drop solderability. The upper electrodes could be peeled off when a heat-resistant masking tape is attached to the mounted chip resistors and then detached from them. It is confirmed that the adhesiveness gets stronger due to the exposure to heat under mounting. Accordingly, we recommend the use of masking tape be refrained. If the use of heat-resistant masking tape is unavoidable, please make sure that the adhesives on the tape do not directly come in contact with the product. For Surface Temperature Rise Graph see Environmental Applications. Additional environmental applications can also be found at www.koaspeer.com Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/06/17 KOA Speer Electronics, Inc. * 199 Bolivar Drive * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com 41 resistors high heat resistance, high reliability metal film chip resistor Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: KOA Speer: RN73H1JTTD2911D25 RN73H1JTTD2911D50 RN73H1JTTD2911F10 RN73H1JTTD2911F25 RN73H1JTTD2911F50 RN73H1JTTD2912A05 RN73H1JTTD2912A10 RN73H1JTTD2912A25 RN73H1JTTD2912B05 RN73H1JTTD2912B10 RN73H1JTTD2912B25 RN73H1JTTD2912B50 RN73H1JTTD2912C10 RN73H1JTTD2912C25 RN73H1JTTD2912C50 RN73H1JTTD2912D10 RN73H1JTTD2912D25 RN73H1JTTD2912D50 RN73H1JTTD2912F10 RN73H1JTTD2912F25 RN73H1JTTD2912F50 RN73H1JTTD2913B25 RN73H1JTTD2913B50 RN73H1JTTD2913C25 RN73H1JTTD2913C50 RN73H1JTTD2913D25 RN73H1JTTD2913D50 RN73H1JTTD2913F25 RN73H1JTTD2913F50 RN73H1JTTD2940A05 RN73H1JTTD2940A10 RN73H1JTTD2940A25 RN73H1JTTD2940B05 RN73H1JTTD2940B10 RN73H1JTTD2940B25 RN73H1JTTD2940B50 RN73H1JTTD2940C10 RN73H1JTTD2940C25 RN73H1JTTD2940C50 RN73H1JTTD2940D10 RN73H1JTTD2940D25 RN73H1JTTD2940D50 RN73H1JTTD2940F10 RN73H1JTTD2940F25 RN73H1JTTD2940F50 RN73H1JTTD2941A05 RN73H1JTTD2941A10 RN73H1JTTD2941A25 RN73H1JTTD2941B05 RN73H1JTTD2941B10 RN73H1JTTD2941B25 RN73H1JTTD2941B50 RN73H1JTTD2941C10 RN73H1JTTD2941C25 RN73H1JTTD2941C50 RN73H1JTTD2941D10 RN73H1JTTD2941D25 RN73H1JTTD2941D50 RN73H1JTTD2941F10 RN73H1JTTD2941F25 RN73H1JTTD2941F50 RN73H1JTTD2942A05 RN73H1JTTD2942A10 RN73H1JTTD2942A25 RN73H1JTTD2942B05 RN73H1JTTD2942B10 RN73H1JTTD2942B25 RN73H1JTTD2942B50 RN73H1JTTD2942C10 RN73H1JTTD2942C25 RN73H1JTTD2942C50 RN73H1JTTD2942D10 RN73H1JTTD2942D25 RN73H1JTTD2942D50 RN73H1JTTD2942F10 RN73H1JTTD2942F25 RN73H1JTTD2942F50 RN73H1JTTD2943B25 RN73H1JTTD2943B50 RN73H1JTTD2943C25 RN73H1JTTD2943C50 RN73H1JTTD2943D25 RN73H1JTTD2943D50 RN73H1JTTD2943F25 RN73H1JTTD2943F50 RN73H1JTTD2980A05 RN73H1JTTD2980A10 RN73H1JTTD2980A25 RN73H1JTTD2980B05 RN73H1JTTD2980B10 RN73H1JTTD2980B25 RN73H1JTTD2980B50 RN73H1JTTD2980C10 RN73H1JTTD2980C25 RN73H1JTTD2980C50 RN73H1JTTD2980D10 RN73H1JTTD2980D25 RN73H1JTTD2980D50 RN73H1JTTD2980F10 RN73H1JTTD2980F25