L1SP-DRD0002800000 - LUMILEDS HOLDING B.V.

ILLUMINATION

No. E352519

LUXEON SunPlus

2835 Line

LEDs engineered to deliver the precise

wavelengths of light needed to improve

crop yield

The LUXEON SunPlus 2835 Line is purpose-built to enable ease of system

design for Horticulture applications. The LUXEON SunPlus 2835 Line

oers the only LEDs available today that are binned and tested based

on Photosynthetic Photon Flux (PPF). The LUXEON SunPlus 2835 Line

includes options for single driver solutions and multi-channel, color

tunable solutions.

FEATURES AND BENEFITS PRIMARY APPLICATIONS

120° angle for uniform light distribution for greenhouse, vertical farming

and interweaving applications Horticulture

2.8 x 3.5mm package

Table of Contents

General Product Information ......................................................................2

Product Test Conditions ..............................................................................2

Part Number Nomenclature ..........................................................................2

Environmental Compliance ...........................................................................2

Performance Characteristics ......................................................................3

Product Selection Guide..............................................................................3

Optical Characteristics ...............................................................................3

Electrical and Thermal Characteristics..................................................................4

Absolute Maximum Ratings .......................................................................4

Characteristic Curves .............................................................................5

Spectral Power Distribution Characteristics .............................................................5

Photon Output Characteristics ........................................................................5

Forward Current Characteristics.......................................................................7

Radiation Pattern Characteristics ......................................................................9

Product Bin and Labeling Denitions ..............................................................10

Decoding Product Bin Labeling.......................................................................10

PPF Bins...........................................................................................10

Color Bin Denitions ................................................................................11

Peak Wavelength Bins...............................................................................11

Forward Voltage Bins ...............................................................................11

Mechanical Dimensions..........................................................................12

Reow Soldering Guidelines ......................................................................13

JEDEC Moisture Sensitivity ...........................................................................13

Solder Pad Design ..................................................................................14

Packaging Information...........................................................................15

Pocket Tape Dimensions ............................................................................15

Reel Dimensions ...................................................................................15

General Product Information

Product Test Conditions

LUXEON SunPlus 2835 Line LEDs are tested and binned with a DC drive current of 120mA at a junction temperature, Tj, of 25°C.

Part Number Nomenclature

Part numbers for LUXEON SunPlus 2835 Line follow the convention below:

L 1 S P – A A A B B 0 C C 0 0 0 0 0

Where:

A A A – designates color (FRD=Far Red, DRD=Deep Red, PRP=Purple, RYL=Royal Blue, LME=Lime and

PNK=Horticultural White)

B B – designates typical percentage of PPF in the blue spectrum (420 to 480nm) vs. the total PPF in the

Photosynthetic Active Radiation (PAR) region (400 to 700nm), which applies only to purple LEDs

(00=2.5%, 10=12.5% and 20=25%)

C C – designates package size (28=2835)

Therefore, the following part number is used for a LUXEON SunPlus 2835 Royal Blue:

L 1 S P – R Y L 0 0 0 2 8 0 0 0 0 0

Environmental Compliance

Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON SunPlus

2835 Line is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment,

namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the

following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or

polybrominated diphenyl ethers (PBDE).

Performance Characteristics

Product Selection Guide

Table 1. Product performance of LUXEON SunPlus 2835 Line at 120mA, Tj=25°C.

COLOR

PEAK WAVELENGTH

(nm)

PPF (µmol/s) [1]

in PAR (400 to 700nm) [2] PPF/W

TYPICAL

(µmol/J)

PART

NUMBER

MINIMUM MAXIMUM MINIMUM TYPICAL

Horticulture White – – 0.71 0.78 2.28 L1SP-PNK1002800000

Purple (2.5% Blue) [4] – – 0.58 0.63 1.84 L1SP-PRP0002800000

Purple (12.5% Blue) [5] – – 0.64 0.70 2.04 L1SP-PRP1002800000

Purple (25% Blue) [6] – – 0.67 0.74 2.16 L1SP-PRP2002800000

Far Red 720 740 0.54 0.60 [3] 2.32 L1SP-FRD0002800000

Deep Red 650 670 0.56 0.62 2.32 L1SP-DRD0002800000

Royal Blue 440 455 0.67 0.74 2.06 L1SP-RYL0002800000

Lime – – 0.72 0.80 2.22 L1SP-LME0002800000

Notes for Table 1:

1. Lumileds maintains a tolerance of ±7.5% on µmol/s measurements for LUXEON SunPlus 2835.

2. PAR is the photosynthetic active radiation from 400 to 700nm.

3. Far Red typical PPF is measured from 700 to 800nm.

4. PPF in blue spectrum (420–480nm) ranges from 0–5% of total PPF in PAR (400–700nm). Typical PPF in the blue spectrum is 2.5%.

5. PPF in blue spectrum (420–480nm) ranges from 10–15% of total PPF in PAR (400–700nm). Typical PPF in the blue spectrum is 12.5%.

6. PPF in blue spectrum (420–480nm) ranges from 20–30% of total PPF in PAR (400–700nm). Typical PPF in the blue spectrum is 25%

Optical Characteristics

Table 2. Optical characteristics for LUXEON SunPlus 2835 Line at 120mA, Tj=25°C.

PART NUMBER TYPICAL SPECTRAL

HALF-WIDTH [1] (nm)

TYPICAL TEMPERATURE

COEFFICIENT OF DOMINANT

WAVELENGTH (nm/°C)

TYPICAL TOTAL

INCLUDED ANGLE [2]

TYPICAL

VIEWING ANGLE [3]

L1SP-PNK1002800000 – – 140° 120°

L1SP-PRPxx02800000 – – 140° 120°

L1SP-RYL0002800000 15 0.04 140° 130°

L1SP-LME0002800000 – 0.01 140° 120°

L1SP-FRD0002800000 30 0.17 140° 130°

L1SP-DRD0002800000 20 0.16 140° 130°

Notes for Table 2:

1. Spectral half-width is the spectral bandwidth at 50% of the peak intensity.

2. Total angle at which 90% of the total luminous ux is captured.

3. Viewing angle is the o axis angle from the LED centerline where the luminous intensity is ½ of the peak value.

Electrical and Thermal Characteristics

Table 3. Electrical and thermal characteristics for LUXEON SunPlus 2835 Line at 120mA, Tj=25°C.

PART NUMBER

FORWARD VOLTAGE [1] (Vf)TYPICAL TEMPERATURE

COEFFICIENT OF FORWARD

VOLTAGE [2] (mV/°C)

TYPICAL THERMAL

RESISTANCE—JUNCTION

TO SOLDER PAD (°C/W)

MINIMUM TYPICAL MAXIMUM

L1SP-PNK1002800000 2.70 2.85 3.00 -2.0 13.0

L1SP-PRPxx02800000 2.70 2.85 3.00 -2.0 to -4.0 13.0

L1SP-FRD0002800000 1.80 2.15 2.50 -1.2 15.0

L1SP-DRD0002800000 1.80 2.15 2.50 -2.4 15.0

L1SP-RYL0002800000 2.80 3.00 3.20 -2.5 25.0

L1SP-LME0002800000 2.80 3.00 3.10 -1.7 25.0

Notes for Table 3:

1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.

2. Measured between 25°C and 85°C.

Absolute Maximum Ratings

Table 4. Absolute maximum ratings for LUXEON SunPlus 2835 Line.

PARAMETER PURPLE AND

HORTICULTURE WHITE FAR RED DEEP RED ROYAL BLUE LIME

DC Forward Current [1, 2] 480mA 300mA 250mA 240mA 240mA

Peak Pulsed Forward Current [1, 3] 500mA 350mA 300mA 300mA 300mA

LED Junction Temperature [1] (DC & Pulse) 125°C 125°C 125°C 125°C 125°C

ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 2

Operating Case Temperature [1] -40°C to 105°C -40°C to 105°C -40°C to 105°C -40°C to 95°C -40°C to 105°C

LED Storage Temperature -40°C to 105°C -40°C to 105°C -40°C to 105°C -40°C to 95°C -40°C to 105°C

Soldering Temperature 20°C to 260°C

Allowable Reow Cycles 3

Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias

Notes for Table 4:

1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.

2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” with frequencies ≥100Hz and amplitude of ≤15% of the maximum

allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC forward current at the corresponding

maximum junction temperature.

3. Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse-on time is ≤5ms per cycle and the duty cycle is ≤50%.

4. Transient reverse voltages and surge currents due to electrical switching or supply interruptions are acceptable if these events do not last for more than 10ms, the amplitude of the reverse

voltage does not exceed 5V and the reverse current is less than 220uA.

5. Max 5V reverse for up to 10s is an acceptable beginning of life, one time test condition.

Characteristic Curves

Spectral Power Distribution Characteristics

Photon Output Characteristics

Figure 1. Typical normalized power vs. wavelength for LUXEON SunPlus 2835 Line at 120mA, Tj=25°C.

Figure 2a. Typical normalized photon output vs. junction temperature

for LUXEON SunPlus 2835 Royal Blue, Deep Red, Far Red, Horticulture White, and Purple at 120mA.

Figure 2c. Typical normalized photon output vs. forward current

for LUXEON SunPlus 2835 Royal Blue, Deep Red, Far Red, Horticulture White, and Purple at Tj=25°C.

Figure 2b. Typical normalized photon output vs. junction temperature for LUXEON SunPlus 2835 Lime at 120mA.

Forward Current Characteristics

Figure 2d. Typical normalized photon output vs. forward current for LUXEON SunPlus 2835 Lime at Tj=25°C.

Figure 3a. Typical forward current vs. forward voltage

for LUXEON SunPlus 2835 Royal Blue, Deep Red, Far Red, Horticulture White, and Purple at Tj=25°C.

Figure 3b. Typical forward current vs. forward voltage for LUXEON SunPlus 2835 Lime at Tj=25°C.

Far Red

Deep Red

Royal Blue

Lime

Cool White

Radiation Pattern Characteristics

Figure 4. Typical radiation pattern for LUXEON SunPlus 2835 Line at 120mA, Tj=25°C.

Figure 5. Typical polar radiation pattern for LUXEON SunPlus 2835 Line at 100mA, Tj=25°C.

Product Bin and Labeling Denitions

Decoding Product Bin Labeling

In the manufacturing of semiconductor products, there are variations in performance around the average values given in the

technical datasheet. For this reason, Lumileds bins LED components for luminous ux or radiometric power, color point, peak or

dominant wavelength and forward voltage.

All emitters packaged within a reel are of the same bin combination.

LUXEON SunPlus 2835 Line LEDs are labeled using a 4-digit alphanumeric CAT code following the format below:

A B B C

Where:

A – designates PPF bin (example: J= 0.7 to 0.75 µmol/s, K= 0.75 to 0.80 µmol/s)

B B – designates color or peak wavelength bin (example: 10=720 to 740nm)

C – designates forward voltage bin (example: B=1.8 to 2.0V, C=2.0 to 2.2V)

Therefore, LUXEON SunPlus 2835 Far Red with a PPF range of 0.55 to 0.60 µmol/s, peak wavelength of 720 to 740nm and a

forward voltage range of 1.80 to 2.0V has the following CAT code:

F 1 0 B

PPF Bins

Table 5 lists the standard PPF bins for LUXEON SunPlus Series. Although several bins are outlined, product availability in a

particular bin varies by production run and by product performance.

Table 5. PPF bin denitions for LUXEON SunPlus 2835 Line.

BIN PPF [1] (µmol/s)

MINIMUM MAXIMUM

D 0.45 0.50

E 0.50 0.55

F 0.55 0.60

G 0.60 0.65

H 0.65 0.70

J 0.70 0.75

K 0.75 0.80

L 0.80 0.85

M 0.85 0.90

N 0.90 0.95

P 0.95 1.00

Q 1.00 1.05

R 1.05 1.10

Notes for Table 5:

1. Lumileds maintains a tolerance of ±7.5% on µmol/s measurements.

Color Bin Denitions

Table 6. Color bin denitions for LUXEON SunPlus 2835 Line.

PRODUCT COLOR BIN [1]

LUXEON SunPlus 2835 Line

Purple (2.5% Blue) DA

Purple (12.5% Blue) FA

Purple (25% Blue) HA

Lime 20

Horticulture White GA

Notes for Table 6:

1. Lumileds maintains a tester tolerance of ±0.005 on color bin coordinates

Peak Wavelength Bins

Table 7. Peak wavelength bins for LUXEON SunPlus 2835 Line at specied test conditions.

PRODUCT COLOR BIN PEAK WAVELENGTH [1] (nm)

MINIMUM MAXIMUM

LUXEON SunPlus 2835 Line

Far Red 10 720 740

Deep Red 10 650 670

Royal Blue

30 440 445

40 445 450

50 450 455

Notes for Table 7:

1. Lumileds maintains a tolerance of ±2.0nm on peak wavelength measurements.

Forward Voltage Bins

Table 8. Forward voltage bin denitions for LUXEON SunPlus 2835 Line at specied test conditions.

PRODUCT COLOR BIN FORWARD VOLTAGE [1] (Vf)

MINIMUM MAXIMUM

LUXEON SunPlus 2835 Line

Far Red

Deep Red

B 1.80 2.00

C 2.00 2.20

D 2.20 2.40

E 2.40 2.60

Royal Blue

Purple

Lime

Horticulture White

Z 2.70 2.80

A 2.80 2.90

B 2.90 3.00

C 3.00 3.10

D 3.10 3.20

E 3.20 3.30

Notes for Table 8:

1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements for LUXEON SunPlus 2835 Line.

Mechanical Dimensions

Notes for Figure 6:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 6. Mechanical dimensions for LUXEON SunPlus 2835 Line.

Reow Soldering Guidelines

Table 9. Reow prole characteristics for LUXEON SunPlus 2835 Line.

PROFILE FEATURE LEAD-FREE ASSEMBLY

Preheat Minimum Temperature (Tsmin) 150°C

Preheat Maximum Temperature (Tsmax) 200°C

Preheat Time (tsmin to tsmax) 60 to 120 seconds

Ramp-Up Rate (TL to Tp) 3°C / second maximum

Liquidus Temperature (TL) 217°C

Time Maintained Above Temperature TL (tL) 10 to 30 seconds

Peak / Classication Temperature (Tp) 260°C

Time Within 5°C of Actual Temperature (tp) 10 to 30 seconds

Ramp-Down Rate (Tp to TL) 6°C / second maximum

Time 25°C to Peak Temperature 8 minutes maximum

JEDEC Moisture Sensitivity

Table 10. Moisture sensitivity levels for LUXEON SunPlus 2835 Line.

PRODUCT LEVEL FLOOR LIFE SOAK REQUIREMENTS STANDARD

TIME CONDITIONS TIME CONDITIONS

LUXEON SunPlus 2835 Line 2 1 Year ≤30°C / 60% RH 168 Hours +5 / -0 85°C / 60% RH

Time 25ºC to Peak

JEDEC J-STD-020D

Critical Zone

TL to Tp

Ramp-up

Ramp-down

Temperature

Time

Preheat Area

Tsmax

Tsmin

Figure 7. Visualization of the acceptable reow temperature prole as specied in Table 9.

Solder Pad Design

Notes for Figure 8:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 8. Recommended PCB solder pad layout for LUXEON SunPlus 2835 Line.

Packaging Information

Pocket Tape Dimensions

Reel Dimensions

Notes for Figures 9 and 10:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 9. Pocket tape dimensions for LUXEON SunPlus 2835 Line.

Figure 10. Reel dimensions for LUXEON SunPlus 2835 Line.

LUXEON is a registered trademark of the Lumileds

Holding B.V. in the United States and other countries.

lumileds.com

DS237 LUXEON SunPlus 2835 Line

Product Datasheet 20181119

Neither Lumileds Holding B.V. nor its aliates shall be liable for any kind of loss of data or any other damages,

direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds

Holding B.V. and/or its aliates have attempted to provide the most accurate information and data, the materials

and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its aliates

warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding

B.V. and its aliates reserve the right to make changes without notice. You as user agree to this disclaimer and

user agreement with the download or use of the provided materials, information and data. A listing of Lumileds

product/patent coverage may be accessed at lumileds.com/patents.

About Lumileds

Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with

them to push the boundaries of light. With over 100 years of inventions and industry rsts, Lumileds is a global lighting solutions

company that helps customers around the world deliver dierentiated solutions to gain and maintain a competitive edge. As the

inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,

quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is

making the world better, safer, more beautiful—with light.

To learn more about our lighting solutions, visit lumileds.com.