Breadboard Adapter for Analog Discovery SKU: 410361 Product Description The Breadboard Adapter is intended to be used with the Analog Discovery tool to provide a prototyping surface with a secure connection. It provides a female header to pass through all connections from the Analog Discovery 2 as well as a prototyping surface. The PCB provides two power rails directly routed from the V+ and V pins on the Analog Discovery. Components and wires can be soldered to the prototyping surface and power rails. Alternatively, the half sized breadboard can be affixed (permanently) to the adapter to provide connections. Note: The Breadboard Adapter for Analog Discovery shares the same connector as the OpenScope MZ, but the pin mapping is not the same. Make sure to check the pin diagram of the OpenScope MZ before using the Breadboard Adapter other devices. Features Protoboard area consists of twentysix rows of 10 plated throughholes Two 26 hole V+, V, and GND rails routed from the 30pin connector 30pin female headers pass through all signals from the Analog Discovery One halfsized solderless breadboard is included Provides an alternative to the flywires for Analog Discovery What's Included: One Breadboard Adapter for the Analog Discovery One halfsize solderless breadboard (not attached) http://store.digilentinc.com/breadboardadapterforanalogdiscovery/ 111517