DOG1 MEMS-Series Inclinometer
DOG1 MEMS-Series www.meas-spec.com 2013-January
MEAS Deutschland GmbH phone: +49-(0)231-9740-0 Email: info. de@meas -spec.com
Range ±180° single axis
Easy to use volt age output
Supply voltage 8-30V
High res olutio n
The single axis inclinometer
is mainly developed for vehicle and tool
position monitoring. A fast response time
and good accuracy makes this device the
ideal choice for mobile leveling applica-
tions. It features digital signal processing
includi ng temp er atur e c ompensation.
The integrated filter improves performance
and allows a use of the sensor in many
noisy environments (e.g. vibrations).
FEATURES
• 8-30V supply voltage (5V on request)
• Up to +/-90 degree tol er ance on 2nd axis
• Digital signal processing includes
o filter (e.g. vibration damping)
o temperature compensation
• 12 bit resolution
• High refresh rate
• -40°C to +85°C temperature range
• Accuracy typically better than
o 0.2° at +25°C
o 0.6° (-40°C to +8 5° C )
APPLICATIONS
• Platform leveling
• Truck and off-road vehicle cabin or tool leveling
• Crane boom leveling
• Tilt alarm, e.g. digger
• Antenna leveling
• Inclination dependent engine control
g
zero position
dimensions
DOG1 MEMS-Series Inclinometer
DOG1 MEMS-Series www.meas-spec.com 2013-January
MEAS Deutschland GmbH phone: +49-(0)231-9740-0 Email: info. de@meas -spec.com
COMMENTS
The inclinometer includes a powerful digital signal processing that offers various filter
algorithms and allows customer specific adaptions. It is possible to adjust the sensor to
different environments to yield an optimized performance.Customization can also be
made in terms of angular range and connectivity, i.e cable and connector.
The main axis gives unique output over +/-180 (0..360) degrees while the other axis has to be
keept in a +/-90° range.
The PA6.6 housing is very compact in size and has compression limiter bushings for safe
installation of the sensor. In contrast to uncoated (casted) aluminum, PA6.6 is resistant to
atmospheric attack. It is compatible with oil, grease and fuel also. Therefore it is frequently
used for engine and vehicle applications.
The information i n this sheet has been careful l y reviewed and is bel i eved to be accurat e; however, no respons i bi lit y is assumed for inaccuracies.
Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer.
Measurement Specialti es, I nc. reserves t he right to make changes without furt her notice to any product herein. Measurement Specialt ies, Inc.
makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement
Specialti es, Inc. assume any liability arisi ng out of the application or use of any product or circuit and s pecifically discl aims any and all liabilit y,
including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating
parameters must be validated for each customer application by customer’s technical experts. Measurement Specialties, Inc. does not convey
any license under its patent rights nor the rights of others.
PARAMETERS
Parameter Value Comment
+/- 180°
Roll (pitch possible)
0.6°
T=-40°C ~ +85°C
Accuracy, typ. 0.2° T=+25°C
12 bit
50~100 Hz
<1s
Valid output angles
Supply/excitation voltage 8 ~ 30V 5V version available as OEM solution on request
~10mA typ., 18mA max.
0.5 ~ 4.5V
-180° ~ +180°, x-direction only
Connector AMP Superseal 1.5-Series,
3-pos cap housing
Tyco Art.-Nr. 282105-1
Requires 3-pos plug housing AMP Superseal 1.5-
Series at connecting harness, Tyco Art.-Nr. 282087-1
3 wire 0.3mm², outer diameter
3.9mm
Length incl. connector 450mm, full temperature range,
flexible
-40°C ~ +85°C
Storage temperature range -40°C ~ +85°C
<50g
Dimensions 70.5 x 45 x 15 mm W x D x H
USER INTE RFAC E
Pin
Function
Description
1
VCC
+8 ~ 30V supply input
2
GND
GND
3
Output
0.5 ~ 4.5V, X-axis output
DOG1 MEMS-Series Inclinometer
DOG1 MEMS-Series www.meas-spec.com 2013-January
MEAS Deutschland GmbH phone: +49-(0)231-9740-0 Email: info. de@meas -spec.com
rderi ng info
PART NUMBERING UNIT SHORT DESCRIPTION
G-NSDOG1-006 180 DOG1 Single axis, range +/- 180°, Vcc +8 …30VDC, output voltage +0.5…+4.5V
ordering info