16TTS.. High Voltage Series Vishay High Power Products Phase Control SCR, 10 A DESCRIPTION/FEATURES 2 (A) TO-220AB The 16TTS.. High Voltage Series of silicon controlled rectifiers are specifically designed for medium power switching and phase control applications. The glass passivation technology used has reliable operation up to 125 C junction temperature. 1 (K) (G) 3 Typical applications are in input rectification (soft start) and these products are designed to be used with Vishay HPP input diodes, switches and output rectifiers which are available in identical package outlines. PRODUCT SUMMARY VT at 10 A < 1.4 V ITSM 200 A VRRM 800/1200 V This product has been designed and qualified for industrial level. OUTPUT CURRENT IN TYPICAL APPLICATIONS APPLICATIONS SINGLE-PHASE BRIDGE THREE-PHASE BRIDGE UNITS 13.5 17 A Capacitive input filter TA = 55 C, TJ = 125 C, common heatsink of 1 C/W MAJOR RATINGS AND CHARACTERISTICS PARAMETER IT(AV) TEST CONDITIONS Sinusoidal waveform IRMS VDRM/VRRM VALUES 10 16 Range (1) 800/1200 UNITS A V 200 A 1.4 V dV/dt 500 V/s dI/dt 150 A/s - 40 to 125 C VRRM, MAXIMUM PEAK REVERSE VOLTAGE V VDRM, MAXIMUM PEAK DIRECT VOLTAGE V IRRM/IDRM AT 125 C mA 16TTS08 800 800 16TTS12 1200 1200 ITSM VT TJ 10 A, TJ = 25 C Range Note (1) For higher voltage up to 1600 V contact factory VOLTAGE RATINGS PART NUMBER Document Number: 93696 Revision: 16-Sep-08 For technical questions, contact: diodes-tech@vishay.com 10 www.vishay.com 1 16TTS.. High Voltage Series Vishay High Power Products Phase Control SCR, 10 A ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Maximum average on-state current IT(AV) Maximum RMS on-state current IRMS Maximum peak, one-cycle, non-repetitive surge current ITSM TEST CONDITIONS TC = 98 C, 180 conduction, half sine wave 170 10 ms sine pulse, no voltage reapplied 200 10 ms sine pulse, rated VRRM applied 144 10 ms sine pulse, no voltage reapplied 200 2000 Maximum I2t for fusing I2t t = 0.1 to 10 ms, no voltage reapplied Maximum on-state voltage drop VTM 10 A, TJ = 25 C Threshold voltage VT(TO) Maximum reverse and direct leakage current IRM/IDM UNITS 10 10 ms sine pulse, rated VRRM applied I2 t rt MAX. 16 Maximum I2t for fusing On-state slope resistance VALUES TYP. TJ = 125 C TJ = 25 C TJ = 125 C Holding current IH Maximum latching current IL Anode supply = 6 V, resistive load A2s A2s 1.4 V 24.0 m 1.1 V 0.5 VR = Rated VRRM/VDRM Anode supply = 6 V, resistive load, initial IT = 1 A 16TTS08, 16TTS12 A 10 - 100 mA 200 Maximum rate of rise of off-state voltage dV/dt 500 V/s Maximum rate of rise of turned-on current dI/dt 150 A/s TRIGGERING PARAMETER SYMBOL Maximum peak gate power TEST CONDITIONS VALUES UNITS PGM 8.0 PG(AV) 2.0 Maximum peak positive gate current + IGM 1.5 A Maximum peak negative gate voltage - VGM 10 V Maximum average gate power Maximum required DC gate current to trigger Maximum required DC gate voltage to trigger IGT VGT Maximum DC gate voltage not to trigger VGD Maximum DC gate current not to trigger IGD Anode supply = 6 V, resistive load, TJ = - 65 C 90 Anode supply = 6 V, resistive load, TJ = 25 C 60 Anode supply = 6 V, resistive load, TJ = 125 C 35 Anode supply = 6 V, resistive load, TJ = - 65 C 3.0 Anode supply = 6 V, resistive load, TJ = 25 C 2.0 Anode supply = 6 V, resistive load, TJ = 125 C 1.0 TJ = 125 C, VDRM = Rated value W mA V 0.2 2.0 mA VALUES UNITS SWITCHING PARAMETER SYMBOL Typical turn-on time tgt Typical reverse recovery time trr Typical turn-off time tq www.vishay.com 2 TEST CONDITIONS TJ = 25 C TJ = 125 C For technical questions, contact: diodes-tech@vishay.com 0.9 4 s 110 Document Number: 93696 Revision: 16-Sep-08 16TTS.. High Voltage Series Phase Control SCR, 10 A Vishay High Power Products THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TJ, TStg Maximum thermal resistance, junction to case RthJC Maximum thermal resistance, junction to ambient RthJA Typical thermal resistance, case to heatsink RthCS TEST CONDITIONS DC operation Marking device Document Number: 93696 Revision: 16-Sep-08 UNITS - 40 to 125 C 1.3 62 Mounting surface, smooth and greased C/W 0.5 2 g 0.07 oz. minimum 6 (5) maximum 12 (10) kgf * cm (lbf * in) Approximate weight Mounting torque VALUES Case style TO-220AB For technical questions, contact: diodes-tech@vishay.com 16TTS08 16TTS12 www.vishay.com 3 16TTS.. High Voltage Series 16TTS.. Series R thJC (DC) = 1.3 C/ W 120 115 Conduction Angle 110 105 100 30 60 95 90 120 180 90 0 2 4 6 8 10 12 Maximum Average On-state Power Loss (W) 125 115 Conduction Period 110 105 100 30 60 90 120 95 180 DC 90 0 2 4 6 8 10 12 14 5 16TTS.. Series TJ = 125C 0 0 2 4 18 180 120 90 60 30 RMSLimit 8 Conduction Angle 6 16TTS.. Series T J = 125C 4 2 0 1 2 3 4 5 6 7 8 9 10 11 180 8 10 12 14 16 18 At Any Rated Load Condition And With Rated V RRMApplied Following Surge. Initial TJ = 125C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 160 140 120 100 16TTS..Series 80 10 100 Fig. 5 - Maximum Non-Repetitive Surge Current 200 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial TJ= 125C No Vo ltage Reap plied Ra ted VRRM Rea pplied 180 160 140 120 100 16TTS.. Series 80 0.01 0.1 1 Pulse Train Duration (s) Average On-state Current (A) Fig. 3 - On-State Power Loss Characteristics www.vishay.com 4 6 1 Peak Half Sine Wave Forward Current (A) Maximum Average On-state Power Loss (W) Conduction Period Number Of Equa l Amplitud e Half Cycle Current Pulses (N) Average On-state Current (A) 0 RMS Limit 10 16 Fig. 2 - Current Rating Characteristics 10 15 Average On-state Current (A) 120 12 20 Fig. 4 - On-State Power Loss Characteristics 16TTS.. Series R thJC (DC) = 1.3 C/ W 14 DC 180 120 90 60 30 Average On-state Current (A) 125 16 25 Fig. 1 - Current Rating Characteristics Peak Half Sine Wave On-state Current (A) Maximum Allowable Case Temperature (C) Maximum Allowable Case Temperature (C) Vishay High Power Products Phase Control SCR, 10 A Fig. 6 - Maximum Non-Repetitive Surge Current For technical questions, contact: diodes-tech@vishay.com Document Number: 93696 Revision: 16-Sep-08 16TTS.. High Voltage Series Phase Control SCR, 10 A Vishay High Power Products Instantaneous On-state Current (A) 1000 16TTS.. Series 100 10 T = 25C J TJ= 125C 1 0 1 2 3 4 5 Instantaneous On-state Voltage (V) Transient Thermal Impedanc e Z thJC (C/ W) Fig. 7 - On-State Voltage Drop Characteristics 10 Steady State Value (DC Operation) 1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 0.1 Single Pulse 16TTS.. Series 0.01 0.0001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics Rec tangular gate pulse a)Recommended load line for rated di/dt: 10 V, 20 ohms tr = 0.5 s, tp >= 6 s b)Recommended load line for <= 30% rated di/ dt: 10 V, 65 ohms 10 tr = 1 s, tp >= 6 s (1) PGM = 40 , tp = 1 ms (2) PGM = 20 W, tp = 2 ms (3) PGM = 8 W, tp = 5 ms (4) PGM = 4 W, tp = 10 ms (a ) (b ) VGD IGD 0.1 0.001 TJ = -10 C TJ = 125 C 1 TJ = 25 C Instantaneous Gate Voltage (V) 100 (4) 0.1 (2) (1) Frequenc y Limited by PG(AV) 16TTS.. Series 0.01 (3) 1 10 100 Instantaneous Gate Current (A) Fig. 9 - Gate Characteristics Document Number: 93696 Revision: 16-Sep-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 16TTS.. High Voltage Series Vishay High Power Products Phase Control SCR, 10 A ORDERING INFORMATION TABLE Device code 16 T T S 12 - 1 2 3 4 5 6 1 - 2 - Current rating Circuit configuration: T = Single thyristor 3 - Package: T = TO-220AB 4 - Type of silicon: S = Converter grade 5 - 6 - 08 = 800 V 12 = 1200 V Voltage code x 100 = VRRM None = Standard production PbF = Lead (Pb)-free Note: For higher voltage up to 1600 V contact factory LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95222 Part marking information http://www.vishay.com/doc?95225 www.vishay.com 6 For technical questions, contact: diodes-tech@vishay.com Document Number: 93696 Revision: 16-Sep-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1