PIC12F510/16F506 Data Sheet 8/14-Pin, 8-Bit Flash Microcontrollers (c) 2007 Microchip Technology Inc. DS41268D Note the following details of the code protection feature on Microchip devices: * Microchip products meet the specification contained in their particular Microchip Data Sheet. * Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. * There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip's Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. * Microchip is willing to work with the customer who is concerned about the integrity of their code. * Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as "unbreakable." Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip's code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights. Trademarks The Microchip name and logo, the Microchip logo, Accuron, dsPIC, KEELOQ, KEELOQ logo, microID, MPLAB, PIC, PICmicro, PICSTART, PRO MATE, rfPIC and SmartShunt are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. AmpLab, FilterLab, Linear Active Thermistor, Migratable Memory, MXDEV, MXLAB, SEEVAL, SmartSensor and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. Analog-for-the-Digital Age, Application Maestro, CodeGuard, dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, FlexROM, fuzzyLAB, In-Circuit Serial Programming, ICSP, ICEPIC, Mindi, MiWi, MPASM, MPLAB Certified logo, MPLIB, MPLINK, PICkit, PICDEM, PICDEM.net, PICLAB, PICtail, PowerCal, PowerInfo, PowerMate, PowerTool, REAL ICE, rfLAB, Select Mode, Smart Serial, SmartTel, Total Endurance, UNI/O, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. (c) 2007, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. Microchip received ISO/TS-16949:2002 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company's quality system processes and procedures are for its PIC(R) MCUs and dsPIC(R) DSCs, KEELOQ(R) code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip's quality system for the design and manufacture of development systems is ISO 9001:2000 certified. DS41268D-page ii (c) 2007 Microchip Technology Inc. PIC12F510/16F506 8/14-Pin, 8-Bit Flash Microcontroller Devices Included In This Data Sheet: * PIC16F506 * PIC12F510 High-Performance RISC CPU: * Only 33 Single-Word Instructions to Learn * All Single-Cycle Instructions except for Program Branches, which are Two-Cycle * 12-Bit Wide Instructions * Two-Level Deep Hardware Stack * Direct, Indirect and Relative Addressing modes for Data and Instructions * 8-Bit Wide Data Path * 10 Special Function Hardware Registers (PIC12F510) * 13 Special Function Hardware Registers (PIC16F506) * Operating Speed: - DC - 8 MHz Crystal Oscillator (PIC12F510) - DC - 500 ns instruction cycle (PIC12F510) - DC - 20 MHz Crystal Oscillator (PIC16F506) - DC - 200 ns instruction cycle (PIC16F506) Special Microcontroller Features: * 4 or 8 MHz Selectable Precision Internal Oscillator: - Factory calibrated to 1% * In-Circuit Serial ProgrammingTM (ICSPTM) * In-Circuit Debugging (ICD) Support * Power-on Reset (POR) * Device Reset Timer (DRT): - Short DRT (1.125 ms, typical) for INTOSC, EXTRC and EC - DRT (18 ms, typical) for HS, XT and LP * Watchdog Timer (WDT) with Dedicated On-Chip RC Oscillator for Reliable Operation * Programmable Code Protection * Multiplexed MCLR Input Pin * Selectable Internal Weak Pull-Ups on I/O Pins * Power-Saving Sleep mode * Wake-up from Sleep on Pin Change * Wake-up from Sleep on Comparator Change (c) 2007 Microchip Technology Inc. * Selectable Oscillator Options: - INTOSC: 4/8 MHz precision Internal oscillator - EXTRC: External low-cost RC oscillator - XT: Standard crystal/resonator - LP: Power-saving, low-frequency crystal - HS: High-speed crystal/resonator (PIC16F506 only) - EC: High-speed external clock input (PIC16F506 only) * Analog-to-Digital (A/D) Converter: - 8-bit resolution - 4-input channels (1 channel is dedicated to conversion of the internal 0.6V absolute voltage reference) * High Current Sink/Source for Direct LED Drive * 8-Bit Real-Time Clock/Counter (TMR0) with 8-Bit Programmable Prescaler Low-Power Features/CMOS Technology: * Operating Current: - < 175 A @ 2V, 4 MHz, typical * Standby Current: - 100 nA @ 2V, typical * Low-Power, High-Speed Flash Technology: - 100,000 cycle Flash endurance - > 40-year retention * Fully Static Design * Wide Operating Voltage Range: 2.0V to 5.5V * Wide Temperature Range: - Industrial: -40C to +85C - Extended: -40C to +125C Peripheral Features (PIC12F510): * 6 I/O Pins: - 5 I/O pins with individual direction control - 1 input only pin * 1 Analog Comparator with Absolute Reference Peripheral Features (PIC16F506): * 12 I/O Pins: - 11 I/O pins with individual direction control - 1 input only pin * 2 Analog Comparators with Absolute Reference and Programmable Reference DS41268D-page 1 PIC12F510/16F506 Program Memory Data Memory Flash (words) SRAM (bytes) PIC16F506 1024 PIC12F510 1024 Device I/O Timers 8-bit 67 12 1 38 6 1 Pin Diagrams PDIP, SOIC and TSSOP VSS 12 RB1/AN1/C1IN-/ICSPCLK 11 RB2/AN2/C1OUT 10 RC0/C2IN+ 9 RC1/C2IN- 7 8 RC2/CVREF VDD 1 GP4/OSC2 2 3 8 7 VSS GP5/OSC1/CLKIN 6 GP1/AN1/C1IN-/ICSPCLK GP3/MCLR/VPP 4 5 GP2/AN2/T0CKI/C1OUT 1 2 RB4/OSC2/CLKOUT 3 RB3/MCLR/VPP RC5/T0CKI 4 5 RC4/C2OUT 6 RC3 PIC16F506 14 13 VDD RB5/OSC1/CLKIN RB0/AN0/C1IN+/ICSPDAT PIC12F510 PDIP, SOIC, MSOP GP0/AN0/C1IN+/ICSPDAT DS41268D-page 2 VDD 1 GP5/OSC1/CLKIN 2 GP4/OSC2 3 GP3/MCLR/VPP 4 PIC12F510 DFN 8 VSS 7 GP0/AN0/C1IN+/ICSPDAT 6 GP1/AN1/C1IN-/ICSPCLK 5 GP2/AN2/T0CKI/C1OUTI (c) 2007 Microchip Technology Inc. PIC12F510/16F506 Table of Contents 1.0 General Description...................................................................................................................................................................... 5 2.0 PIC12F510/16F506 Device Varieties .......................................................................................................................................... 7 3.0 Architectural Overview ................................................................................................................................................................. 9 4.0 Memory Organization ................................................................................................................................................................. 15 5.0 I/O Port ....................................................................................................................................................................................... 27 6.0 TMR0 Module and TMR0 Register............................................................................................................................................. 39 7.0 Comparator(s) ............................................................................................................................................................................ 43 8.0 Comparator Voltage Reference Module (PIC16F506 only)........................................................................................................ 49 9.0 Analog-to-Digital (A/D) Converter............................................................................................................................................... 51 10.0 Special Features Of The CPU.................................................................................................................................................... 55 11.0 Instruction Set Summary ............................................................................................................................................................ 71 12.0 Development Support................................................................................................................................................................. 79 13.0 Electrical Characteristics ............................................................................................................................................................ 83 14.0 DC and AC Characteristics Graphs and Charts ......................................................................................................................... 97 15.0 Packaging................................................................................................................................................................................. 105 Index .................................................................................................................................................................................................. 117 The Microchip Web Site ..................................................................................................................................................................... 119 Customer Change Notification Service .............................................................................................................................................. 119 Customer Support .............................................................................................................................................................................. 119 Reader Response .............................................................................................................................................................................. 120 Product Identification System ............................................................................................................................................................ 121 TO OUR VALUED CUSTOMERS It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Microchip products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and enhanced as new volumes and updates are introduced. If you have any questions or comments regarding this publication, please contact the Marketing Communications Department via E-mail at docerrors@microchip.com or fax the Reader Response Form in the back of this data sheet to (480) 792-4150. We welcome your feedback. Most Current Data Sheet To obtain the most up-to-date version of this data sheet, please register at our Worldwide Web site at: http://www.microchip.com You can determine the version of a data sheet by examining its literature number found on the bottom outside corner of any page. The last character of the literature number is the version number, (e.g., DS30000A is version A of document DS30000). Errata An errata sheet, describing minor operational differences from the data sheet and recommended workarounds, may exist for current devices. As device/documentation issues become known to us, we will publish an errata sheet. The errata will specify the revision of silicon and revision of document to which it applies. To determine if an errata sheet exists for a particular device, please check with one of the following: * Microchip's Worldwide Web site; http://www.microchip.com * Your local Microchip sales office (see last page) When contacting a sales office, please specify which device, revision of silicon and data sheet (include literature number) you are using. Customer Notification System Register on our web site at www.microchip.com to receive the most current information on all of our products. (c) 2007 Microchip Technology Inc. DS41268D-page 3 PIC12F510/16F506 NOTES: DS41268D-page 4 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 1.0 GENERAL DESCRIPTION The PIC12F510/16F506 devices from Microchip Technology are low-cost, high-performance, 8-bit, fullystatic, Flash-based CMOS microcontrollers. They employ a RISC architecture with only 33 single-word/ single-cycle instructions. All instructions are singlecycle except for program branches, which take two cycles. The PIC12F510/16F506 devices deliver performance in an order of magnitude higher than their competitors in the same price category. The 12-bit wide instructions are highly symmetrical, resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. The easy-to-use and easyto-remember instruction set reduces development time significantly. 1.1 Applications The PIC12F510/16F506 devices fit in applications ranging from personal care appliances and security systems to low-power remote transmitters/receivers. The Flash technology makes customizing application programs (transmitter codes, appliance settings, receiver frequencies, etc.) extremely fast and convenient. The small footprint packages, for through hole or surface mounting, make these microcontrollers perfect for applications with space limitations. Low-cost, lowpower, high-performance, ease-of-use and I/O flexibility make the PIC12F510/16F506 devices very versatile, even in areas where no microcontroller use has been considered before (e.g., timer functions, logic and PLDs in larger systems and coprocessor applications). The PIC12F510/16F506 products are equipped with special features that reduce system cost and power requirements. The Power-on Reset (POR) and Device Reset Timer (DRT) eliminate the need for external Reset circuitry. There are four oscillator configurations to choose from (six on the PIC16F506), including INTOSC Internal Oscillator mode and the Power-Saving LP (Low-power) Oscillator mode. Power-Saving Sleep mode, Watchdog Timer and code protection features improve system cost, power and reliability. The PIC12F510/16F506 devices allow the customer to take full advantage of Microchip's price leadership in Flash programmable microcontrollers, while benefiting from the Flash programmable flexibility. The PIC12F510/16F506 products are supported by a full-featured macro assembler, a software simulator, an in-circuit emulator, a `C' compiler, a low-cost development programmer and a full featured programmer. All the tools are supported on IBM(R) PC and compatible machines. TABLE 1-1: PIC12F510/16F506 DEVICES PIC16F506 Clock Maximum Frequency of Operation (MHz) Memory Flash Program Memory (words) Data Memory (bytes) Peripherals Timer Module(s) Wake-up from Sleep on Pin Change Features I/O Pins Input Only Pin PIC12F510 20 8 1024 1024 67 38 TMR0 TMR0 Yes Yes 11 5 1 1 Internal Pull-ups Yes Yes In-Circuit Serial Programming Yes Yes Number of Instructions 33 33 14-pin PDIP, SOIC, TSSOP 8-pin PDIP, SOIC, MSOP, DFN Packages The PIC12F510/16F506 devices have Power-on Reset, selectable Watchdog Timer, selectable code-protect, high I/O current capability and precision internal oscillator. The PIC12F510/16F506 devices use serial programming with data pin RB0/GP0 and clock pin RB1/GP1. (c) 2007 Microchip Technology Inc. DS41268D.-page 5 PIC12F510/16F506 NOTES: DS41268D.-page 6 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 2.0 PIC12F510/16F506 DEVICE VARIETIES A variety of packaging options are available. Depending on application and production requirements, the proper device option can be selected using the information in this section. When placing orders, please use the PIC12F510/16F506 Product Identification System at the back of this data sheet to specify the correct part number. 2.1 Quick Turn Programming (QTP) Devices 2.2 Serialized Quick Turn ProgrammingSM (SQTPSM) Devices Microchip offers a unique programming service, where a few user-defined locations in each device are programmed with different serial numbers. The serial numbers may be random, pseudo-random or sequential. Serial programming allows each device to have a unique number, which can serve as an entry code, password or ID number. Microchip offers a QTP programming service for factory production orders. This service is made available for users who choose not to program medium-to-high quantity units and whose code patterns have stabilized. The devices are identical to the Flash devices, but with all Flash locations and fuse options already programmed by the factory. Certain code and prototype verification procedures do apply before production shipments are available. Please contact your local Microchip Technology sales office for more details. (c) 2007 Microchip Technology Inc. DS41268D-page 7 PIC12F510/16F506 NOTES: DS41268D-page 8 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 3.0 ARCHITECTURAL OVERVIEW The high performance of the PIC12F510/16F506 devices can be attributed to a number of architectural features commonly found in RISC microprocessors. The PIC12F510/16F506 devices use a Harvard architecture in which program and data are accessed on separate buses. This improves bandwidth over traditional von Neumann architectures where program and data are fetched on the same bus. Separating program and data memory further allows instructions to be sized differently than the 8-bit wide data word. Instruction opcodes are 12 bits wide, making it possible to have all single-word instructions. A 12-bit wide program memory access bus fetches a 12-bit instruction in a single cycle. A two-stage pipeline overlaps fetch and execution of instructions. Consequently, all instructions (33) execute in a single cycle (200 ns @ 20 MHz, 1 s @ 4 MHz) except for program branches. Table 3-1 lists program memory (Flash) and data memory (RAM) for the PIC12F510/16F506 devices. TABLE 3-1: Device The ALU is 8 bits wide and capable of addition, subtraction, shift and logical operations. Unless otherwise mentioned, arithmetic operations are two's complement in nature. In two-operand instructions, one operand is typically the W (working) register. The other operand is either a file register or an immediate constant. In single-operand instructions, the operand is either the W register or a file register. The W register is an 8-bit working register used for ALU operations. It is not an addressable register. Depending on the instruction executed, the ALU may affect the values of the Carry (C), Digit Carry (DC) and Zero (Z) bits in the STATUS register. The C and DC bits operate as a borrow and digit borrow out bit, respectively, in subtraction. See the SUBWF and ADDWF instructions for examples. A simplified block diagram is shown in Figure 3-1 for PIC12F510 with the corresponding device pins described in Table 3-2. A simplified block diagram for PIC16F506 is shown in Figure 3-2 with the corresponding device pins described in Table 3-3. PIC12F510/16F506 MEMORY Memory Program Data PIC12F510 1024 x 12 38 x 8 PIC16F506 1024 x 12 67 x 8 The PIC12F510/16F506 devices can directly or indirectly address its register files and data memory. All Special Function Registers (SFRs), including the PC, are mapped in the data memory. The PIC12F510/ 16F506 devices have a highly orthogonal (symmetrical) instruction set that makes it possible to carry out any operation, on any register, using any addressing mode. This symmetrical nature and lack of "special optimal situations" make programming with the PIC12F510/16F506 devices simple, yet efficient. In addition, the learning curve is reduced significantly. The PIC12F510/16F506 devices contain an 8-bit ALU and working register. The ALU is a general purpose arithmetic unit. It performs arithmetic and Boolean functions between data in the working register and any register file. (c) 2007 Microchip Technology Inc. DS41268D-page 9 PIC12F510/16F506 FIGURE 3-1: PIC12F510 SERIES BLOCK DIAGRAM 10-11 Flash 8 Data Bus Program Counter GPIO GP0/ICSPDAT GP1/ICSPCLK GP2 GP3 GP4 GP5 1K x 12 Program Bus RAM STACK 1 Program Memory 38 bytes STACK 2 File Registers 12 RAM Addr 9 Addr MUX Instruction Reg Direct Addr 5 5-7 Indirect Addr FSR Reg STATUS Reg 8 3 Device Reset Timer OSC1/CLKIN OSC2 Instruction Decode & Control Power-on Reset Timing Generation Watchdog Timer Internal RC Clock MUX ALU 8 W Reg Timer0 MCLR Comparator VDD, VSS C1IN+ C1INC1OUT CVREF 8-bit ADC AN0 AN1 AN2 T0CKI DS41268D-page 10 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 TABLE 3-2: PIN DESCRIPTIONS - PIC12F510 Name I/O/P Type Input Type Output Type GP0/AN0/C1IN+/ICSPDAT GP0 TTL CMOS Description Bidirectional I/O port. Can be software programmed for internal weak pull-up and wake-up from Sleep on pin change. AN0 AN -- ADC channel input. C1IN+ AN -- Comparator input. ICSPDAT ST CMOS In-Circuit Serial Programming data pin. GP1 TTL CMOS Bidirectional I/O port. Can be software programmed for internal weak pull-up and wake-up from Sleep on pin change. GP1/AN1/C1IN-/ICSPCLK AN1 AN -- ADC channel input. C1IN- AN -- Comparator input. ICSPCLK ST -- In-Circuit Serial Programming clock pin. GP2 TTL CMOS AN2 AN -- ADC channel input. T0CKI ST -- Timer0 clock input. C1OUT -- CMOS Comparator output. GP3 TTL -- Standard TTL input. Can be software programmed for internal weak pull-up and wake-up from Sleep on pin change. MCLR ST -- MCLR input - weak pull-up always enabled in this mode. VPP HV -- Programming Voltage input. GP4 TTL CMOS Bidirectional I/O port. OSC2 -- XTAL XTAL oscillator output pin. GP2/AN2/T0CKI/C1OUT GP3/MCLR/VPP GP4/OSC2 GP5/OSC1/CLKIN GP5 TTL CMOS OSC1 XTAL -- Bidirectional I/O port. Bidirectional I/O port. XTAL oscillator input pin. CLKIN ST -- EXTRC Schmitt Trigger input. VDD VDD P -- Positive supply for logic and I/O pins. VSS VSS P -- Ground reference for logic and I/O pins. Legend: I = input, O = output, I/O = input/output, P = power, -- = Not Used, TTL = TTL input, ST = Schmitt Trigger input, AN = Analog Voltage, HV = High Voltage (c) 2007 Microchip Technology Inc. DS41268D-page 11 PIC12F510/16F506 FIGURE 3-2: PIC16F506 SERIES BLOCK DIAGRAM 10 Flash 1K x 12 Program Memory PORTB RB0/ICSPDAT RB1/ICSPCLK RB2 RB3 RB4 RB5 RAM 67 bytes File Registers STACK 1 STACK 2 Program Bus 8 Data Bus Program Counter 10 RAM Addr 9 PORTC Addr MUX Instruction Reg Direct Addr 5 5-7 RC0 RC1 RC2 RC3 RC4 RC5 Indirect Addr FSR Reg STATUS Reg 8 3 Device Reset Timer OSC1/CLKIN OSC2/CLKOUT Instruction Decode & Control Power-on Reset Timing Generation Watchdog Timer Internal RC Clock Comparator 1 MUX C1IN+ C1INC1OUT 0.6V Reference C2IN+ ALU Comparator 2 8 C2INC2OUT W Reg CVREF CVREF CVREF Timer0 AN0 MCLR VDD, VSS 8-bit ADC AN1 AN2 T0CKI DS41268D-page 12 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 TABLE 3-3: PIN DESCRIPTIONS - PIC16F506 Name Function Input Type Output Type RB0/AN0/C1IN+/ICSPDAT RB0 TTL CMOS Description Bidirectional I/O port. Can be software programmed for internal weak pull-up and wake-up from Sleep on pin change. AN0 AN -- ADC channel input. C1IN+ AN -- Comparator 1 input. ICSPDAT ST CMOS In-Circuit Serial Programming data pin. RB1 TTL CMOS Bidirectional I/O port. Can be software programmed for internal weak pull-up and wake-up from Sleep on pin change. RB1/AN1/C1IN-/ICSPCLK AN1 AN -- ADC channel input. C1IN- AN -- Comparator 1 input. ICSPCLK ST -- In-Circuit Serial Programming clock pin. RB2/AN2/C1OUT RB2 TTL CMOS AN2 AN -- C1OUT -- CMOS RB3 TTL -- Standard TTL input. Can be software programmed for internal weak pull-up and wake-up from Sleep on pin change. MCLR ST -- MCLR input - weak pull-up always enabled in this mode. Programming voltage input. RB3/MCLR/VPP RB4/OSC2/CLKOUT Bidirectional I/O port. ADC channel input. Comparator 1 output. VPP HV -- RB4 TTL CMOS Bidirectional I/O port. Can be software programmed for internal weak pull-up and wake-up from Sleep on pin change. OSC2 -- XTAL XTAL oscillator output pin. CLKOUT -- CMOS EXTRC/INTOSC CLKOUT pin (FOSC/4). RB5 TTL CMOS Bidirectional I/O port. OSC1 XTAL -- RB5/OSC1/CLKIN RC0/C2IN+ RC1/C2INRC2/CVREF XTAL oscillator input pin. CLKIN ST -- RC0 TTL CMOS Bidirectional I/O port. EXTRC/EC Schmitt Trigger input. C2IN+ AN -- Comparator 2 input. RC1 TTL CMOS Bidirectional I/O port. C2IN- AN -- Comparator 2 input. RC2 TTL CMOS Bidirectional I/O port. CVREF -- AN RC3 RC3 TTL CMOS Bidirectional I/O port. RC4/C2OUT RC4 TTL CMOS Bidirectional I/O port. C2OUT -- CMOS Comparator 2 output. RC5 TTL CMOS Bidirectional I/O port. T0CKI ST -- Timer0 clock input. VDD VDD P -- Positive supply for logic and I/O pins. VSS VSS P -- Ground reference for logic and I/O pins. RC5/T0CKI Programmable Voltage Reference output. Legend: I = input, O = output, I/O = input/output, P = power, -- = Not Used, TTL = TTL input, ST = Schmitt Trigger input, AN = Analog Voltage, HV = High Voltage (c) 2007 Microchip Technology Inc. DS41268D-page 13 PIC12F510/16F506 3.1 Clocking Scheme/Instruction Cycle 3.2 Instruction Flow/Pipelining An instruction cycle consists of four Q cycles (Q1, Q2, Q3 and Q4). The instruction fetch and execute are pipelined such that fetch takes one instruction cycle, while decode and execute take another instruction cycle. However, due to the pipelining, each instruction effectively executes in one cycle. If an instruction causes the PC to change (e.g., GOTO), then two cycles are required to complete the instruction (Example 3-1). The clock input (OSC1/CLKIN pin) is internally divided by four to generate four non-overlapping quadrature clocks, namely Q1, Q2, Q3 and Q4. Internally, the PC is incremented every Q1 and the instruction is fetched from program memory and latched into the instruction register in Q4. It is decoded and executed during the following Q1 through Q4. The clocks and instruction execution flow is shown in Figure 3-3 and Example 3-1. A fetch cycle begins with the PC incrementing in Q1. In the execution cycle, the fetched instruction is latched into the Instruction Register (IR) in cycle Q1. This instruction is then decoded and executed during the Q2, Q3 and Q4 cycles. Data memory is read during Q2 (operand read) and written during Q4 (destination write). FIGURE 3-3: CLOCK/INSTRUCTION CYCLE Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 OSC1 Q1 Q2 Internal Phase Clock Q3 Q4 PC PC PC + 1 Fetch INST (PC) Execute INST (PC - 1) EXAMPLE 3-1: PC + 2 Fetch INST (PC + 1) Execute INST (PC) Fetch INST (PC + 2) Execute INST (PC + 1) INSTRUCTION PIPELINE FLOW 1. MOVLW 03H 2. MOVWF PORTB 3. CALL SUB_1 4. BSF PORTB, BIT1 Fetch 1 Execute 1 Fetch 2 Execute 2 Fetch 3 Execute 3 Fetch 4 Flush Fetch SUB_1 Execute SUB_1 All instructions are single cycle, except for any program branches. These take two cycles, since the fetch instruction is "flushed" from the pipeline, while the new instruction is being fetched and then executed. DS41268D-page 14 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 MEMORY ORGANIZATION The PIC12F510/16F506 memories are organized into program memory and data memory. For devices with more than 512 bytes of program memory, a paging scheme is used. Program memory pages are accessed using STATUS register bit PA0. For the PIC12F510 and PIC16F506, with data memory register files of more than 32 registers, a banking scheme is used. Data memory banks are accessed using the File Select Register (FSR). 4.1 FIGURE 4-1: PC<11:0> Only the first 1K x 12 (0000h-03FFh) are physically implemented (see Figure 4-1). Accessing a location above these boundaries will cause a wraparound within the 1K x 12 space. The effective Reset vector is a 0000h (see Figure 4-1). Location 03FFh contains the internal clock oscillator calibration value. This value should never be overwritten. 10 Stack Level 1 Stack Level 2 Reset Vector(1) Program Memory Organization for the PIC12F510/16F506 The PIC12F510/16F506 devices have a 10-bit Program Counter (PC) capable of addressing a 2K x 12 program memory space. PROGRAM MEMORY MAP AND STACK FOR THE PIC12F510/16F506 CALL, RETLW 0000h On-chip Program Memory User Memory Space 4.0 512 Word 01FFh 0200h On-chip Program Memory 1024 Word 03FFh 0400h 7FFh Note 1: (c) 2007 Microchip Technology Inc. Address 0000h becomes the effective Reset vector. Location 03FFh contains the MOVLW XX internal oscillator calibration value. DS41268D-page 15 PIC12F510/16F506 4.2 Data Memory Organization FIGURE 4-2: Data memory is composed of registers or bytes of RAM. Therefore, data memory for a device is specified by its register file. The register file is divided into two functional groups: Special Function Registers (SFRs) and General Purpose Registers (GPRs). FSR<5> 0 1 File Address The Special Function Registers include the TMR0 register, the Program Counter (PCL), the STATUS register, the I/O registers (ports) and the File Select Register (FSR). In addition, Special Function Registers are used to control the I/O port configuration and prescaler options. The General Purpose Registers are used for data and control information under command of the instructions. For the PIC12F510, the register file is composed of 10 Special Function Registers, 6 General Purpose Registers and 32 General Purpose Registers accessed by banking (see Figure 4-2). 00h INDF(1) 01h TMR0 02h PCL 03h STATUS 04h FSR 05h OSCCAL 06h GPIO 07h CM1CON0 08h ADCON0 09h ADRES 0Ah General Purpose Registers 0Fh For the PIC16F506, the register file is composed of 13 Special Function Registers, 3 General Purpose Registers and 64 General Purpose Registers, accessed by banking (see Figure 4-3). 4.2.1 PIC12F510 REGISTER FILE MAP 20h Addresses map back to addresses in Bank 0. 2Fh 30h 10h General Purpose Registers General Purpose Registers GENERAL PURPOSE REGISTER FILE 1Fh The General Purpose Register file is accessed either directly or indirectly through the File Select Register (FSR). See Section 4.8 "Indirect Data Addressing: INDF and FSR Registers". FIGURE 4-3: 3Fh Bank 0 Bank 1 Note 1: Not a physical register. PIC16F506 REGISTER FILE MAP FSR<6:5> 00 File Address 00h INDF(1) 01h TMR0 02h PCL 03h STATUS 04h FSR 05h OSCCAL 06h PORTB 07h PORTC 08h CM1CON0 09h ADCON0 0Ah ADRES 0Bh CM2CON0 0Ch VRCON 0Dh General Purpose Registers 0Fh 10h General Purpose Registers 1Fh 01 20h 40h 11 60h Addresses map back to addresses in Bank 0. 2Fh 30h 3Fh Bank 0 10 4Fh General Purpose Registers Bank 1 50h 6Fh General Purpose Registers 5Fh 70h General Purpose Registers 7Fh Bank 2 Bank 3 Note 1: Not a physical register. DS41268D-page 16 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 4.2.2 SPECIAL FUNCTION REGISTERS The Special Function Registers (SFRs) are registers used by the CPU and peripheral functions to control the operation of the device (see Table 4-1). The Special Function Registers can be classified into two sets. The Special Function Registers associated with the "core" functions are described in this section. Those related to the operation of the peripheral features are described in the section for each peripheral feature. TABLE 4-1: Address SPECIAL FUNCTION REGISTER SUMMARY - PIC12F510 Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on Power-on Reset N/A TRIS I/O Control Registers (TRISGPIO) --11 1111 N/A OPTION Contains control bits to configure Timer0 and Timer0/WDT Prescaler 1111 1111 00h INDF Uses contents of FSR to address data memory (not a physical register) xxxx xxxx 01h TMR0 Timer0 Module Register xxxx xxxx 02h(1) PCL Low Order 8 bits of PC 1111 1111 03h STATUS 04h FSR 05h OSCCAL 06h GPIO GPWUF CWUF PA0 TO PD Z DC C Indirect Data Memory Address Pointer 0001 1xxx 110x xxxx CAL6 CAL5 CAL4 CAL3 CAL2 CAL1 CAL0 -- 1111 111- -- -- GP5 GP4 GP3 GP2 GP1 GP0 --xx xxxx C1OUT C1OUTEN C1POL C1T0CS C1ON C1NREF C1PREF C1WU 1111 1111 ANS1 ANS0 ADCS1 ADCS0 CHS1 CHS0 GO/DONE ADON 1111 1100 07h CM1CON0 08h ADCON0 09h ADRES Legend: Note 1: x = unknown, u = unchanged, - = unimplemented, read as `0' (if applicable). Shaded cells = unimplemented or unused. The upper byte of the Program Counter is not directly accessible. See Section 4.6 "Program Counter" for an explanation of how to access these bits. ADC Conversion Result (c) 2007 Microchip Technology Inc. xxxx xxxx DS41268D-page 17 PIC12F510/16F506 TABLE 4-2: Address N/A SPECIAL FUNCTION REGISTER SUMMARY - PIC16F506 Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on Power-on Reset TRIS I/O Control Registers (TRISB, TRISC) --11 1111 N/A OPTION Contains control bits to configure Timer0 and Timer0/WDT Prescaler 1111 1111 00h INDF Uses contents of FSR to address data memory (not a physical register) xxxx xxxx 01h TMR0 Timer0 Module Register xxxx xxxx 02h(1) PCL Low Order 8 bits of PC 03h STATUS 04h FSR 05h OSCCAL 06h 07h TO PD Z DC C 0001 1xxx CAL3 CAL2 CAL1 CAL0 -- 1111 111- Indirect Data Memory Address Pointer -- -- RB5 RB4 RB3 RB2 RB1 RB0 --xx xxxx PORTC -- -- RC5 RC4 RC3 RC2 RC1 RC0 --xx xxxx C1OUT C1OUTEN C1POL C1T0CS C1ON C1NREF C1PREF C1WU 1111 1111 ANS1 ANS0 ADCS1 ADCS0 CHS1 CHS0 GO/DONE ADON 1111 1100 CM1CON0 0Ah ADRES 0Bh CM2CON0 0Ch VRCON CAL4 100x xxxx PORTB ADCON0 4.3 1111 1111 PA0 CAL5 08h 2: CWUF CAL6 09h Legend: Note 1: RBWUF ADC Conversion Result xxxx xxxx C2OUT C2OUTEN C2POL C2PREF2 C2ON C2NREF C2PREF1 C2WU 1111 1111 VREN VROE VRR --(2) VR3 VR2 VR1 VR0 0011 1111 x = unknown, u = unchanged, - = unimplemented, read as `0' (if applicable). Shaded cells = unimplemented or unused. The upper byte of the Program Counter is not directly accessible. See Section 4.6 "Program Counter" for an explanation of how to access these bits. Unimplemented bit VRCON<4> read as `1'. STATUS Register This register contains the arithmetic status of the ALU, the Reset status and the page preselect bit. The STATUS register can be the destination for any instruction, as with any other register. If the STATUS register is the destination for an instruction that affects the Z, DC or C bits, then the write to these three bits is disabled. These bits are set or cleared according to the device logic. Furthermore, the TO and PD bits are not writable. Therefore, the result of an instruction with the STATUS register as destination may be different than intended. For example, CLRF STATUS, will clear the upper three bits and set the Z bit. This leaves the STATUS register as 000u u1uu (where u = unchanged). Therefore, it is recommended that only BCF, BSF and MOVWF instructions be used to alter the STATUS register. These instructions do not affect the Z, DC or C bits from the STATUS register. For other instructions which do affect Status bits, see Section 11.0 "Instruction Set Summary". DS41268D-page 18 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 REGISTER 4-1: STATUS: STATUS REGISTER (PIC12F510) R/W-0 R/W-0 R/W-0 R-1 R-1 R/W-x R/W-x R/W-x GPWUF CWUF PA0 TO PD Z DC C bit 7 bit 0 Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' -n = Value at POR `1' = Bit is set `0' = Bit is cleared x = Bit is unknown bit 7 GPWUF: GPIO Reset bit 1 = Reset due to wake-up from Sleep on pin change 0 = After power-up or other Reset bit 6 CWUF: Comparator Reset bit 1 = Reset due to wake-up from Sleep on comparator change 0 = After power-up or other Reset bit 5 PA0: Program Page Preselect bit 1 = Page 1 (200h-3FFh) 0 = Page 0 (000h-1FFh) Each page is 512 bytes. Using the PA0 bit as a general purpose read/write bit in devices which do not use it for program page preselect is not recommended, since this may affect upward compatibility with future products. bit 4 TO: Time-Out bit 1 = After power-up, CLRWDT instruction, or SLEEP instruction 0 = A WDT time-out occurred bit 3 PD: Power-Down bit 1 = After power-up or by the CLRWDT instruction 0 = By execution of the SLEEP instruction bit 2 Z: Zero bit 1 = The result of an arithmetic or logic operation is zero 0 = The result of an arithmetic or logic operation is not zero bit 1 DC: Digit Carry/Borrow bit (for ADDWF and SUBWF instructions) ADDWF: 1 = A carry from the 4th low-order bit of the result occurred 0 = A carry from the 4th low-order bit of the result did not occur SUBWF: 1 = A borrow from the 4th low-order bit of the result did not occur 0 = A borrow from the 4th low-order bit of the result occurred bit 0 C: Carry/Borrow bit (for ADDWF, SUBWF and RRF, RLF instructions) SUBWF: RRF or RLF: ADDWF: 1 = A carry occurred 1 = A borrow did not occur Load bit with LSb or MSb, respectively 0 = A carry did not occur 0 = A borrow occurred (c) 2007 Microchip Technology Inc. DS41268D-page 19 PIC12F510/16F506 REGISTER 4-2: STATUS: STATUS REGISTER (PIC16F506) R/W-0 R/W-0 R/W-0 R-1 R-1 R/W-x R/W-x R/W-x RBWUF CWUF PA0 TO PD Z DC C bit 7 bit 0 Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' -n = Value at POR `1' = Bit is set `0' = Bit is cleared x = Bit is unknown bit 7 RBWUF: PORTB Reset bit 1 = Reset due to wake-up from Sleep on pin change 0 = After power-up or other Reset bit 6 CWUF: Comparator Reset bit 1 = Reset due to wake-up from Sleep on comparator change 0 = After power-up or other Reset bit 5 PA0: Program Page Preselect bit 1 = Page 1 (200h-3FFh) 0 = Page 0 (000h-1FFh) Each page is 512 bytes. Using the PA0 bit as a general purpose read/write bit in devices which do not use it for program page preselect is not recommended, since this may affect upward compatibility with future products. bit 4 TO: Time-Out bit 1 = After power-up, CLRWDT instruction, or SLEEP instruction 0 = A WDT time-out occurred bit 3 PD: Power-Down bit 1 = After power-up or by the CLRWDT instruction 0 = By execution of the SLEEP instruction bit 2 Z: Zero bit 1 = The result of an arithmetic or logic operation is zero 0 = The result of an arithmetic or logic operation is not zero bit 1 DC: Digit Carry/Borrow bit (for ADDWF and SUBWF instructions) ADDWF: 1 = A carry from the 4th low-order bit of the result occurred 0 = A carry from the 4th low-order bit of the result did not occur SUBWF: 1 = A borrow from the 4th low-order bit of the result did not occur 0 = A borrow from the 4th low-order bit of the result occurred bit 0 C: Carry/Borrow bit (for ADDWF, SUBWF and RRF, RLF instructions) ADDWF: SUBWF: RRF or RLF: 1 = A carry occurred 1 = A borrow did not occur Load bit with LSb or MSb, respectively 0 = A carry did not occur 0 = A borrow occurred DS41268D-page 20 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 4.4 OPTION Register The OPTION register is a 8-bit wide, write-only register, that contains various control bits to configure the Timer0/WDT prescaler and Timer0. By executing the OPTION instruction, the contents of the W register will be transferred to the OPTION register. A Reset sets the OPTION<7:0> bits. Note 1: If TRIS bit is set to `0', the wake-up on change and pull-up functions are disabled for that pin (i.e., note that TRIS overrides Option control of GPPU/RBPU and GPWU/RBWU). 2: If the T0CS bit is set to `1', it will override the TRIS function on the T0CKI pin. REGISTER 4-3: OPTION_REG: OPTION REGISTER (PIC12F510) W-1 W-1 W-1 W-1 W-1 W-1 W-1 W-1 GPWU GPPU T0CS T0SE PSA PS2 PS1 PS0 bit 7 bit 0 Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' -n = Value at POR `1' = Bit is set `0' = Bit is cleared bit 7 GPWU: Enable Wake-up On Pin Change bit (GP0, GP1, GP3) 1 = Disabled 0 = Enabled bit 6 GPPU: Enable Weak Pull-Ups bit (GP0, GP1, GP3) 1 = Disabled 0 = Enabled bit 5 T0CS: Timer0 Clock Source Select bit 1 = Transition on T0CKI pin 0 = Internal instruction cycle clock (CLKOUT) bit 4 T0SE: Timer0 Source Edge Select bit 1 = Increment on high-to-low transition on T0CKI pin 0 = Increment on low-to-high transition on T0CKI pin bit 3 PSA: Prescaler Assignment bit 1 = Prescaler assigned to the WDT 0 = Prescaler assigned to Timer0 bit 2-0 PS<2:0>: Prescaler Rate Select bits Bit Value Timer0 Rate WDT Rate 000 001 010 011 100 101 110 111 1:2 1:4 1:8 1 : 16 1 : 32 1 : 64 1 : 128 1 : 256 1:1 1:2 1:4 1:8 1 : 16 1 : 32 1 : 64 1 : 128 (c) 2007 Microchip Technology Inc. x = Bit is unknown DS41268D-page 21 PIC12F510/16F506 REGISTER 4-4: OPTION_REG: OPTION REGISTER (PIC16F506) W-1 W-1 W-1 W-1 W-1 W-1 W-1 W-1 RBWU RBPU T0CS T0SE PSA PS2 PS1 PS0 bit 7 bit 0 Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' -n = Value at POR `1' = Bit is set `0' = Bit is cleared bit 7 RBWU: Enable Wake-up On Pin Change bit (RB0, RB1, RB3, RB4) 1 = Disabled 0 = Enabled bit 6 RBPU: Enable Weak Pull-Ups bit (RB0, RB1, RB3, RB4) 1 = Disabled 0 = Enabled bit 5 T0CS: Timer0 Clock Source Select bit 1 = Transition on T0CKI pin 0 = Internal instruction cycle clock (CLKOUT) bit 4 T0SE: Timer0 Source Edge Select bit 1 = Increment on high-to-low transition on T0CKI pin 0 = Increment on low-to-high transition on T0CKI pin bit 3 PSA: Prescaler Assignment bit 1 = Prescaler assigned to the WDT 0 = Prescaler assigned to Timer0 bit 2-0 PS<2:0>: Prescaler Rate Select bits DS41268D-page 22 Bit Value Timer0 Rate WDT Rate 000 001 010 011 100 101 110 111 1:2 1:4 1:8 1 : 16 1 : 32 1 : 64 1 : 128 1 : 256 1:1 1:2 1:4 1:8 1 : 16 1 : 32 1 : 64 1 : 128 x = Bit is unknown (c) 2007 Microchip Technology Inc. PIC12F510/16F506 4.5 OSCCAL Register The Oscillator Calibration (OSCCAL) register is used to calibrate the internal precision 4/8 MHz oscillator. It contains seven bits for calibration. Note: Erasing the device will also erase the preprogrammed internal calibration value for the internal oscillator. The calibration value must be read prior to erasing the part so it can be reprogrammed correctly later. After you move in the calibration constant, do not change the value. See Section 10.2.5 "Internal 4/8 MHz RC Oscillator". REGISTER 4-5: OSCCAL: OSCILLATOR CALIBRATION REGISTER R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 U-0 CAL6 CAL5 CAL4 CAL3 CAL2 CAL1 CAL0 -- bit 7 bit 0 Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' -n = Value at POR `1' = Bit is set `0' = Bit is cleared bit 7-1 CAL<6:0>: Oscillator Calibration bits 0111111 = Maximum frequency * * * 0000001 0000000 = Center frequency 1111111 * * * 1000000 = Minimum frequency bit 0 Unimplemented: Read as `0' (c) 2007 Microchip Technology Inc. x = Bit is unknown DS41268D-page 23 PIC12F510/16F506 4.6 Program Counter 4.6.1 EFFECTS OF RESET As a program instruction is executed, the Program Counter (PC) will contain the address of the next program instruction to be executed. The PC value is increased by one every instruction cycle, unless an instruction changes the PC. The PC is set upon a Reset, which means that the PC addresses the last location in the last page (i.e., the oscillator calibration instruction). After executing MOVLW XX, the PC will roll over to location 00h and begin executing user code. For a GOTO instruction, bits 8:0 of the PC are provided by the GOTO instruction word. The Program Counter (PCL) is mapped to PC<7:0>. Bit 5 of the STATUS register provides page information to bit 9 of the PC (Figure 4-4). The STATUS register page preselect bits are cleared upon a Reset, which means that page 0 is preselected. For a CALL instruction, or any instruction where the PCL is the destination, bits 7:0 of the PC again are provided by the instruction word. However, PC<8> does not come from the instruction word, but is always cleared (Figure 4-4). Instructions where the PCL is the destination or modify PCL instructions include MOVWF PC, ADDWF PC and BSF PC, 5. Note: Because PC<8> is cleared in the CALL instruction or any modify PCL instruction, all subroutine calls or computed jumps are limited to the first 256 locations of any program memory page (512 words long). FIGURE 4-4: LOADING OF PC BRANCH INSTRUCTIONS GOTO Instruction 9 8 7 PC 0 PCL 7 4.7 Stack The PIC12F510/16F506 devices have a two-deep, 12-bit wide hardware PUSH/POP stack. A CALL instruction will PUSH the current value of Stack 1 into Stack 2 and then PUSH the current PC value, incremented by one, into Stack Level 1. If more than two sequential CALLs are executed, only the most recent two return addresses are stored. A RETLW instruction will POP the contents of Stack Level 1 into the PC and then copy Stack Level 2 contents into Stack Level 1. If more than two sequential RETLWs are executed, the stack will be filled with the address previously stored in Stack Level 2. Note 1: The W register will be loaded with the literal value specified in the instruction. This is particularly useful for the implementation of data look-up tables within the program memory. 2: There are no Status bits to indicate stack overflows or stack underflow conditions. Instruction Word PA0 Therefore, upon a Reset, a GOTO instruction will automatically cause the program to jump to page 0 until the value of the page bits is altered. 3: There are no instruction mnemonics called PUSH or POP. These are actions that occur from the execution of the CALL and RETLW instructions. 0 STATUS CALL or Modify PCL Instruction 9 8 7 PC 7 0 PCL Instruction Word Reset to `0' PA0 0 STATUS DS41268D-page 24 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 4.8 Indirect Data Addressing: INDF and FSR Registers EXAMPLE 4-1: The INDF register is not a physical register. Addressing INDF actually addresses the register whose address is contained in the FSR register (FSR is a pointer). This is indirect addressing. 4.8.1 INDIRECT ADDRESSING EXAMPLE * * * * Register file 07 contains the value 10h Register file 08 contains the value 0Ah Load the value 07 into the FSR register A read of the INDF register will return the value of 10h * Increment the value of the FSR register by one (FSR = 08) * A read of the INDR register now will return the value of 0Ah. MOVLW MOVWF NEXT CLRF INCF BTFSC GOTO CONTINUE : : HOW TO CLEAR RAM USING INDIRECT ADDRESSING 0x10 FSR INDF FSR,F FSR,4 NEXT ;initialize pointer ;to RAM ;clear INDF register ;inc pointer ;all done? ;NO, clear next ;YES, continue The FSR is a 5-bit wide register. It is used in conjunction with the INDF register to indirectly address the data memory area. The FSR<4:0> bits are used to select data memory addresses 00h to 1Fh. Reading INDF itself indirectly (FSR = 0) will produce 00h. Writing to the INDF register indirectly results in a no operation (although Status bits may be affected). PIC16F506 - Uses FSR<6:5>. Selects from Bank 0 to Bank 3. FSR<7> is unimplemented, read as `1'. A simple program to clear RAM locations 10h-1Fh using indirect addressing is shown in Example 4-1. PIC12F510 - Uses FSR<5>. Selects from Bank 0 to Bank 1. FSR<7:6> are unimplemented, read as `11'. FIGURE 4-5: DIRECT/INDIRECT ADDRESSING (PIC12F510) Direct Addressing (FSR) (opcode) 6 5 Bank Select 4 3 2 1 Indirect Addressing (FSR) 0 6 4 Bank Select Location Select 00 5 01 3 2 1 0 Location Select 00h Addresses map back to addresses in Bank 0. Data Memory(1) 0Fh 10h 1Fh 3Fh Bank 0 Note 1: 2: Bank 1 For register map detail, see Figure 4-2. Grey boxes are unimplemented and read as `1'. (c) 2007 Microchip Technology Inc. DS41268D-page 25 PIC12F510/16F506 FIGURE 4-6: DIRECT/INDIRECT ADDRESSING (PIC16F506) Direct Addressing Indirect Addressing (FSR) 6 5 (opcode) 4 3 2 1 0 Bank Select Location Select 6 00 01 10 00h Data Memory(1) Bank 0 Location Select Addresses map back to addresses in Bank 0. 0Fh 10h 1Fh Bank 0 Note 1: 11 (FSR) 5 4 3 2 1 3Fh Bank 1 5Fh Bank 2 7Fh Bank 3 For register map detail, see Figure 4-3. DS41268D-page 26 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 5.0 I/O PORT As with any other register, the I/O register(s) can be written and read under program control. However, read instructions (e.g., MOVF PORTB, W) always read the I/O pins independent of the pin's Input/Output modes. On Reset, all I/O ports are defined as input (inputs are at high-impedance) since the I/O control registers are all set. Note: 5.1 On the PIC12F510, I/O PORTB is referenced as GPIO. On the PIC16F506, I/O PORTB is referenced as PORTB. PORTB/GPIO PORTB/GPIO is an 8-bit I/O register. Only the loworder 6 bits are used (RB/GP<5:0>). Bits 7 and 6 are unimplemented and read as `0's. Please note that RB3/ GP3 is an input only pin. The Configuration Word can set several I/O's to alternate functions. When acting as alternate functions, the pins will read as `0' during a port read. Pins RB0/GP0, RB1/GP1, RB3/GP3 and RB4 (PIC16F506 only) can be configured with weak pull-up and also for wake-up on change. The wake-up on change and weak pull-up functions are not pin selectable. If RB3/GP3/MCLR is configured as MCLR, weak pull-up is always on and wake-up on change for this pin is not enabled. 5.2 5.4 I/O Interfacing The equivalent circuit for an I/O port pin is shown in Figure 5-1. All port pins, except RB3/GP3 which is input only, may be used for both input and output operations. For input operations, these ports are non-latching. Any input must be present until read by an input instruction (e.g., MOVF PORTB, W). The outputs are latched and remain unchanged until the output latch is rewritten. To use a port pin as output, the corresponding direction control bit in TRIS must be cleared (= 0). For use as an input, the corresponding TRIS bit must be set. Any I/O pin (except RB3/GP3) can be programmed individually as input or output. FIGURE 5-1: Data Bus Data Bus Interface The Output Driver Control register is loaded with the contents of the W register by executing the TRIS f instruction. A `1' from a TRIS register bit puts the corresponding output driver in a High-Impedance mode. A `0' puts the contents of the output data latch on the selected pins, enabling the output buffer. The exception is RB3/GP3, which are input only, and the T0CKI pin, which may be controlled by the OPTION register. See Register 4-3. Note: A read of the port reads the pins, not the output data latches. That is, if an output driver on a pin is enabled and driven high but the external system is holding it low, a read of the port will indicate that the pin is low. Note: The TRIS registers are write-only and are set (output drivers disabled) upon Reset. (c) 2007 Microchip Technology Inc. (1) N D I/O pin Q VSS PORTC (PIC16F506 Only) TRIS Registers VDD VDD P CK PORTC is an 8-bit I/O register. Only the low-order 6 bits are used (RC<5:0>). Bits 7 and 6 are unimplemented and read as `0's. 5.3 PIC12F510/16F506 EQUIVALENT CIRCUIT FOR PIN DRIVE(2) VSS Q Reset Note 1: 2: GP3/RB3 has protection diode to VSS only. For pin specific information, see Figure 5-2 through Figure 5-13. DS41268D-page 27 PIC12F510/16F506 FIGURE 5-2: BLOCK DIAGRAM OF GP0/RB0 AND GP1/RB1 FIGURE 5-3: BLOCK DIAGRAM OF GP3/RB3 (With Weak Pull-up And Wake-up On Change) GPPU RBPU GPPU RBPU Data Bus MCLRE D Q Data Latch WR Port CK I/O Pin(1) Q Reset W Reg D I/O Pin(1) Q TRIS Latch TRIS `f' CK Q Data Bus Reset RD Port ADC pin Ebl Q COMP pin Ebl D CK RD Port Mismatch Q D CK Mismatch ADC COMP Note 1: I/O pins have protection diodes to VDD and VSS. DS41268D-page 28 Note 1: GP3/MCLR pin has a protection diode to VSS only. (c) 2007 Microchip Technology Inc. PIC12F510/16F506 FIGURE 5-4: BLOCK DIAGRAM OF GP2 C1OUT Data Bus D Q 0 1 C1OUT Data Bus WR Port Q CK D D Q TRIS `f' TRIS `f' Q CK I/O Pin(1) 1 Q CK C1OUTEN W Reg TRIS Latch Q 0 Data Latch C1OUTEN W Reg BLOCK DIAGRAM OF RB2 I/O Pin(1) Data Latch WR Port FIGURE 5-5: Reset D Q TRIS Latch Q CK Reset T0CS C1T0CS ADC Pin Enable ADC Pin Enable RD Port T0CKI RD Port ADC ADC Note 1: I/O pins have protection diodes to VDD and VSS. (c) 2007 Microchip Technology Inc. Note 1: I/O pins have protection diodes to VDD and VSS. DS41268D-page 29 PIC12F510/16F506 FIGURE 5-6: BLOCK DIAGRAM OF RB4 FIGURE 5-7: BLOCK DIAGRAM OF GP4 RBPU Data Bus Data Bus D WR Port Q 0 D Q Data Latch I/O pin(1) Q CK Data Latch WR Port Q CK I/O pin(1) 1 W Reg FOSC/4 W Reg D TRIS `f' Q D Q TRIS Latch Q CK TRIS Latch TRIS `f' Reset Q CK INTOSC/RC Reset INTOSC/RC/EC CLKOUT Enable (Note 2) RD Port OSC1 Oscillator Circuit RD Port OSC1 Note 1: 2: Oscillator Circuit I/O pins have protection diodes to VDD and VSS. Input mode is disabled when pin is used for oscillator. DS41268D-page 30 Note 1: I/O pins have protection diodes to VDD and VSS. (c) 2007 Microchip Technology Inc. PIC12F510/16F506 FIGURE 5-8: Data Bus BLOCK DIAGRAM OF RB5/GP5 D Data Bus Q Data Latch WR Port I/O pin(1) Q CK W Reg FIGURE 5-9: D W Reg Q TRIS Latch TRIS `f' Q CK WR Port TRIS `f' BLOCK DIAGRAM OF RC0/RC1 D Q Data Latch I/O pin(1) Q CK D Q TRIS Latch Q CK Reset Reset (Note 2) Comp Pin Enable RD Port OSC2 Oscillator Circuit RD Port COMP2 Note 1: I/O pins have protection diodes to VDD and VSS. 2: Input mode is disabled when pin is used for oscillator. (c) 2007 Microchip Technology Inc. Note 1: I/O pins have protection diodes to VDD and VSS. DS41268D-page 31 PIC12F510/16F506 FIGURE 5-10: BLOCK DIAGRAM OF RC2 FIGURE 5-11: BLOCK DIAGRAM OF RC3 VROE Data Bus CVREF Data Bus WR Port D Q 1 I/O PIN(1) WR Port W Reg Q TRIS `f' W Reg TRIS `f' D D Q Data Latch Q CK 0 Data Latch CK I/O Pin(1) Q D Q TRIS Latch Q CK Reset TRIS Latch Q CK Reset RD Port RD Port COMP2 Note 1: I/O pins have protection diodes to VDD and VSS. DS41268D-page 32 Note 1: I/O pins have protection diodes to VDD and VSS. (c) 2007 Microchip Technology Inc. PIC12F510/16F506 FIGURE 5-12: BLOCK DIAGRAM OF RC4 C2OUT Data Bus WR Port D Q 0 BLOCK DIAGRAM OF RC5 I/O Pin(1) 1 Data Latch Q CK FIGURE 5-13: Data Bus WR Port I/O Pin(1) D Q Data Latch Q CK C2OUTEN W Reg TRIS `f' D Q TRIS Latch Q CK W Reg TRIS `f' Reset D Q TRIS Latch Q CK T0CS Reset RD Port RD Port Note 1: I/O pins have protection diodes to VDD and VSS. (c) 2007 Microchip Technology Inc. T0CKI Note 1: I/O pins have protection diodes to VDD and VSS. DS41268D-page 33 PIC12F510/16F506 TABLE 5-1: Address SUMMARY OF PORT REGISTERS Name Bit 7 Bit 6 TRISGPIO(1) Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on Power-On Reset Value on All Other Resets -- -- I/O Control Register --11 1111 --11 1111 N/A (2) TRISB -- -- I/O Control Register --11 1111 --11 1111 N/A TRISC(2) -- -- I/O Control Register --11 1111 --11 1111 N/A OPTION (1) GPWU GPPU T0CS TOSE PSA PS2 PS1 PS0 1111 1111 1111 1111 N/A OPTION(2) RBWU RBPU T0CS TOSE PSA PS2 PS1 PS0 1111 1111 1111 1111 03h STATUS(1) GPWUF CWUF PA0 TO PD Z DC C 0001 1xxx qq0q quuu(3) 03h STATUS (2) RBWUF CWUF PA0 TO PD Z DC C 0001 1xxx qq0q quuu(3) 06h GPIO(1) -- -- GP5 GP4 GP3 GP2 GP1 GP0 --xx xxxx --uu uuuu 06h PORTB(2) -- -- RB5 RB4 RB3 RB2 RB1 RB0 --xx xxxx --uu uuuu 07h (2) -- -- RC5 RC4 RC3 RC2 RC1 RC0 --xx xxxx --uu uuuu N/A PORTC Legend: Note 1: 2: 3: - = unimplemented read as `0', x = unknown, u = unchanged, q = depends on condition. PIC12F510 only. PIC16F506 only. If Reset was due to wake-up on pin change, then bit 7 = 1. All other Resets will cause bit 7 = 0. TABLE 5-2: I/O PIN FUNCTION ORDER OF PRECEDENCE (PIC16F506) Priority RB0 RB1 RB2 RB3 RB4 RB5 1 AN0/C1IN+ AN1/C1IN- AN2 Input/MCLR OSC2/CLKOUT OSC1/CLKIN 2 TRISB TRISB C1OUT -- TRISB TRISB 3 -- -- TRISB -- -- -- TABLE 5-3: I/O PIN FUNCTION ORDER OF PRECEDENCE (PIC16F506) Priority RC0 RC1 RC2 RC3 RC4 RC5 1 C2IN+ C2IN- CVREF TRISC C2OUT T0CKI 2 TRISC TRISC TRISC -- TRISC TRISC TABLE 5-4: I/O PIN FUNCTION ORDER OF PRECEDENCE (PIC12F510) Priority GP0 GP1 GP2 GP3 GP4 GP5 1 AN0/C1IN+ AN1/C1IN- AN2 Input/MCLR OSC2 OSC1/CLKIN 2 TRISIO TRISIO C1OUT -- TRISIO TRISIO 3 -- -- T0CKI -- -- -- 4 -- -- TRISIO -- -- -- DS41268D-page 34 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 TABLE 5-5: REQUIREMENTS FOR DIGITAL PIN OPERATION (PIC12F510) GP0 GP0 GP1 GP1 GP2 GP2 GP3 GP4 GP5 C1ON 0 1 0 1 0 1 -- -- -- C1PREF -- 0 -- 1 -- -- -- -- -- C1NREF -- -- -- 0 -- -- -- -- -- C1T0CS -- -- -- -- -- 1 -- -- -- C1OUTEN -- -- -- -- -- 1 -- -- -- C2ON -- -- -- -- -- -- -- -- -- C2PREF1 -- -- -- -- -- -- -- -- -- C2PREF2 -- -- -- -- -- -- -- -- -- C2NREF -- -- -- -- -- -- -- -- -- C2OUTEN -- -- -- -- -- -- -- -- -- VROE -- -- -- -- -- -- -- -- -- VREN -- -- -- -- -- -- -- -- -- -- -- -- -- -- 0 -- -- -- 00, 01 00, 01 00 00 -- -- -- MCLRE -- -- -- -- -- -- -- -- -- INTOSC -- -- -- -- -- -- -- -- -- LP -- -- -- -- -- -- -- Disabled Disabled EXTRC -- -- -- -- -- -- -- -- Disabled -- -- -- -- -- -- -- Disabled Disabled CM1CON0 CM2CON0 VRCON0 OPTION T0CS ADCON0 ANS<1:0> 00, 01, 10 00, 01, 10 CONFIG XT Note 1: 2: Multiple column entries for a pin demonstrate the different permutations to arrive at digital functionality for the pin. Shaded cells indicate the bit status does not affect the pins digital functionality. (c) 2007 Microchip Technology Inc. DS41268D-page 35 PIC12F510/16F506 TABLE 5-6: REQUIREMENTS FOR DIGITAL PIN OPERATION (PIC16F506 PORTB)(1), (2) RB0 RB0 RB0 RB1 RB1 RB2 RB2 RB3 RB4 RB5 CM1CON0 C1ON -- 0 1 0 1 0 1 -- -- -- C1PREF -- -- 0 -- -- -- -- -- -- -- C1NREF -- -- -- -- 0 -- -- -- -- -- C1T0CS -- -- -- -- -- -- -- -- -- -- C1OUTEN -- -- -- -- -- -- 1 -- -- -- C2ON 1 -- -- -- -- -- -- -- -- -- C2PREF1 0 -- -- -- -- -- -- -- -- -- C2PREF2 1 -- -- -- -- -- -- -- -- -- C2NREF -- -- -- -- -- -- -- -- -- -- C2OUTEN -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 00 00 -- -- -- -- -- -- -- CM2CON0 OPTION T0CS ADCON0 ANS<1:0> 00, 01 00, 01 00, 01 00, 01, 10 00, 01, 10 CONFIG MCLRE -- -- -- -- -- -- -- 0 INTOSC -- -- -- -- -- -- -- -- LP -- -- -- -- -- -- -- -- EXTRC -- -- -- -- -- -- -- -- XT -- -- -- -- -- -- -- -- EC -- -- -- -- -- -- -- -- HS -- -- -- -- -- -- -- -- Disabled Disabled INTOSC CLKOUT -- -- -- -- -- -- -- -- Disabled Disabled EXTRC CLOCKOUT -- -- -- -- -- -- -- -- Disabled Disabled Note 1: 2: Disabled Disabled -- Disabled Disabled Disabled -- Disabled Multiple column entries for a pin demonstrate the different permutations to arrive at digital functionality for the pin. Shaded cells indicate the bit status does not affect the pins digital functionality. TABLE 5-7: CM2CON0 C2ON C2PREF1 C2PREF2 C2NREF REQUIREMENTS FOR DIGITAL PIN OPERATION (PIC16F506 PORTC)(1), (2) RC0 RC0 RC1 RC1 RC2 RC3 RC4 RC4 RC5 RC5 0 -- -- -- 1 0 0 -- 0 -- -- -- 1 -- -- 0 -- -- -- -- -- -- -- -- 0 -- -- -- 1 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 1 -- -- C2OUTEN VRCON0 VROE -- -- -- -- 0 -- -- -- -- -- OPTION T0CS -- -- -- -- -- -- -- -- 0 -- Note 1: Multiple column entries for a pin demonstrate the different permutations to arrive at digital functionality for the pin. 2: Shaded cells indicate the bit status does not affect the pins digital functionality. DS41268D-page 36 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 5.5 I/O Programming Considerations 5.5.1 BIDIRECTIONAL I/O PORTS Some instructions operate internally as read followed by write operations. For example, the BCF and BSF instructions read the entire port into the CPU, execute the bit operation and re-write the result. Caution must be used when these instructions are applied to a port where one or more pins are used as input/outputs. For example, a BSF operation on bit 5 of PORTB/GPIO will cause all eight bits of PORTB/GPIO to be read into the CPU, bit 5 to be set and the PORTB/GPIO value to be written to the output latches. If another bit of PORTB/ GPIO is used as a bidirectional I/O pin (say bit `0') and it is defined as an input at this time, the input signal present on the pin itself would be read into the CPU and rewritten to the data latch of this particular pin, overwriting the previous content. As long as the pin stays in the Input mode, no problem occurs. However, if bit `0' is switched into Output mode later on, the content of the data latch may now be unknown. Example 5-1 shows the effect of two sequential Read-Modify-Write instructions (e.g., BCF, BSF, etc.) on an I/O port. A pin actively outputting a high or a low should not be driven from external devices at the same time in order to change the level on this pin ("wired OR", "wired AND"). The resulting high output currents may damage the chip. FIGURE 5-14: ;Initial PORTB Settings ;PORTB<5:3> Inputs ;PORTB<2:0> Outputs ; ; PORTB latch ; ---------BCF PORTB, 5 ;--01 -ppp BCF PORTB, 4 ;--10 -ppp MOVLW 007h; TRIS PORTB ;--10 -ppp ; Note: 5.5.2 PORTB pins -----------11 pppp --11 pppp --11 pppp The user may have expected the pin values to be `--00 pppp'. The 2nd BCF caused RB5 to be latched as the pin value (High). SUCCESSIVE OPERATIONS ON I/O PORTS The actual write to an I/O port happens at the end of an instruction cycle. Whereas for reading, the data must be valid at the beginning of the instruction cycle (Figure 5-14). Therefore, care must be exercised if a write followed by a read operation is carried out on the same I/O port. The sequence of instructions should allow the pin voltage to stabilize (load dependent) before the next instruction causes the file to be read into the CPU. Otherwise, the previous state of that pin may be read into the CPU rather than the new state. When in doubt, it is better to separate these instructions with a NOP or another instruction not accessing this I/O port. PC PC + 1 MOVWF PORTB MOVF PORTB, W Q1 Q2 Q3 Q4 PC + 2 PC + 3 NOP NOP This example shows a write to PORTB followed by a read from PORTB. Data setup time = (0.25 TCY - TPD) where: TCY = instruction cycle RB<5:0> TPD = propagation delay Port pin written here Instruction Executed READ-MODIFY-WRITE INSTRUCTIONS ON AN I/O PORT (e.g., PIC16F506) SUCCESSIVE I/O OPERATION (PIC16F506) Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Instruction Fetched EXAMPLE 5-1: MOVWF PORTB (Write to PORTB) (c) 2007 Microchip Technology Inc. Therefore, at higher clock frequencies, a write followed by a read may be problematic. Port pin sampled here MOVF PORTB,W (Read PORTB) NOP DS41268D-page 37 PIC12F510/16F506 NOTES: DS41268D-page 38 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 6.0 TMR0 MODULE AND TMR0 REGISTER The second Counter mode uses the output of the comparator to increment Timer0. It can be entered in two different ways. The first way is selected by setting the T0CS bit (OPTION<5>), and clearing the C1T0CS bit (CM1CON0<4>) (C1OUTEN [CM1CON0<6>] does not affect this mode of operation). This enables an internal connection between the comparator and the Timer0. The Timer0 module has the following features: * * * * 8-bit timer/counter register, TMR0 Readable and writable 8-bit software programmable prescaler Internal or external clock select: - Edge select for external clock - External clock from either the T0CKI pin or from the output of the comparator The second way is selected by setting the T0CS bit (OPTION<5>), setting the C1T0CS bit (CM1CON0) and clearing the C1OUTEN bit (CM1CON0<6>). This allows the output of the comparator onto the T0CKI pin, while keeping the T0CKI input active. Therefore, any comparator change on the COUT pin is fed back into the T0CKI input. The T0SE bit (OPTION<4>) determines the source edge. Clearing the T0SE bit selects the rising edge. Restrictions on the external clock input as discussed in Section 6.1 "Using Timer0 With An External Clock". Figure 6-1 is a simplified block diagram of the Timer0 module. Timer mode is selected by clearing the T0CS bit (OPTION<5>). In Timer mode, the Timer0 module will increment every instruction cycle (without prescaler). If TMR0 register is written, the increment is inhibited for the following two cycles (Figure 6-2 and Figure 6-3). The user can work around this by writing an adjusted value to the TMR0 register. The prescaler may be used by either the Timer0 module or the Watchdog Timer, but not both. The prescaler assignment is controlled in software by the control bit PSA (OPTION<3>). Clearing the PSA bit will assign the prescaler to Timer0. The prescaler is not readable or writable. When the prescaler is assigned to the Timer0 module, prescale values of 1:2, 1:4,..., 1:256 are selectable. Section 6.2 "Prescaler" details the operation of the prescaler. There are two types of Counter mode. The first Counter mode uses the T0CKI pin to increment Timer0. It is selected by setting the T0CKI bit (OPTION<5>), setting the C1T0CS bit (CM1CON0<4>) and setting the C1OUTEN bit (CM1CON0<6>). In this mode, Timer0 will increment either on every rising or falling edge of pin T0CKI. The T0SE bit (OPTION<4>) determines the source edge. Clearing the T0SE bit selects the rising edge. Restrictions on the external clock input are discussed in detail in Section 6.1 "Using Timer0 With An External Clock". FIGURE 6-1: A summary of registers associated with the Timer0 module is found in Table 6-1. TIMER0 BLOCK DIAGRAM T0CKI Pin Data Bus FOSC/4 Internal Comparator Output 0 PSOUT 1 1 1 0 T0SE Programmable Prescaler(2) (1) 0 8 Sync with Internal Clocks TMR0 Reg PSOUT (2 TCY delay) Sync 3 C1T0CS(3) Note 1: 2: 3: T0CS(1) PS2, PS1, PS0(1) PSA(1) Bits T0CS, T0SE, PSA, PS2, PS1 and PS0 are located in the OPTION register. The prescaler is shared with the Watchdog Timer (Figure 6-5). Bit C1T0CS is located in the CM1CON0 register, CM1CON0<4>. (c) 2007 Microchip Technology Inc. DS41268D-page 39 PIC12F510/16F506 FIGURE 6-2: PC (Program Counter) TIMER0 TIMING: INTERNAL CLOCK/NO PRESCALE Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 PC - 1 Instruction Fetch PC PC + 1 MOVWF TMR0 T0 Timer0 T0 + 1 PC (Program Counter) Write TMR0 executed PC + 5 PC + 6 NT0 + 1 NT0 Read TMR0 reads NT0 Read TMR0 reads NT0 Read TMR0 reads NT0 NT0 + 2 Read TMR0 Read TMR0 reads NT0 + 1 reads NT0 + 2 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 PC - 1 PC PC + 1 MOVWF TMR0 T0 Timer0 PC + 3 T0 + 1 PC + 4 PC + 5 NT0 Write TMR0 executed TABLE 6-1: PC + 2 PC + 6 MOVF TMR0,W MOVF TMR0,W MOVF TMR0,W MOVF TMR0,W MOVF TMR0,W Instruction Executed 01h PC + 4 TIMER0 TIMING: INTERNAL CLOCK/PRESCALE 1:2 Instruction Fetch Addr PC + 3 T0 + 2 Instruction Executed FIGURE 6-3: PC + 2 MOVF TMR0,W MOVF TMR0,W MOVF TMR0,W MOVF TMR0,W MOVF TMR0,W Read TMR0 reads NT0 Read TMR0 reads NT0 NT0 + 1 Read TMR0 reads NT0 Read TMR0 Read TMR0 reads NT0 + 1 reads NT0 + 2 REGISTERS ASSOCIATED WITH TIMER0 Name Bit 7 TMR0 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Timer0 - 8-bit Real-Time Clock/Counter Value on Power-On Reset Value on All Other Resets xxxx xxxx uuuu uuuu 07h (2) CM1CON0 C1OUT C1OUTEN C1POL C1T0CS C1ON C1NREF C1PREF C1WU 1111 1111 08h CM1CON0(3) C1OUT C1OUTEN C1POL C1T0CS C1ON C1NREF C1PREF C1WU 1111 1111 N/A OPTION GPWU GPPU T0CS T0SE PSA PS2 PS1 PS0 N/A TRISGPIO(1) -- -- I/O Control Register uuuu uuuu uuuu uuuu 1111 1111 1111 1111 ---- 1111 --11 1111 Legend: Shaded cells not used by Timer0, - = unimplemented, x = unknown, u = unchanged. Note 1: The TRIS of the T0CKI pin is overridden when T0CS = 1. 2: For PIC12F510. 3: For PIC16F506. DS41268D-page 40 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 6.1 Using Timer0 With An External Clock When an external clock input is used for Timer0, it must meet certain requirements. The external clock requirement is due to internal phase clock (TOSC) synchronization. Also, there is a delay in the actual incrementing of Timer0 after synchronization. 6.1.1 EXTERNAL CLOCK SYNCHRONIZATION When no prescaler is used, the external clock input is the same as the prescaler output. The synchronization of an external clock with the internal phase clocks is accomplished by sampling the prescaler output on the Q2 and Q4 cycles of the internal phase clocks (Figure 6-4). Therefore, it is necessary for T0CKI or the comparator output to be high for at least 2TOSC (and a small RC delay of 2Tt0H) and low for at least 2TOSC (and a small RC delay of 2Tt0H). Refer to the electrical specification of the desired device. FIGURE 6-4: When a prescaler is used, the external clock input is divided by the asynchronous ripple counter-type prescaler, so that the prescaler output is symmetrical. For the external clock to meet the sampling requirement, the ripple counter must be taken into account. Therefore, it is necessary for T0CKI or the comparator output to have a period of at least 4TOSC (and a small RC delay of 4Tt0H) divided by the prescaler value. The only requirement on T0CKI or the comparator output high and low time is that they do not violate the minimum pulse width requirement of Tt0H. Refer to parameters 40, 41 and 42 in the electrical specification of the desired device. 6.1.2 TIMER0 INCREMENT DELAY Since the prescaler output is synchronized with the internal clocks, there is a small delay from the time the external clock edge occurs to the time the Timer0 module is actually incremented. Figure 6-4 shows the delay from the external clock edge to the timer incrementing. TIMER0 TIMING WITH EXTERNAL CLOCK Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 External Clock Input or Prescaler Output(2) External Clock/Prescaler Output After Sampling (3) Q1 Q2 Q3 Q4 Small pulse misses sampling (1) Increment Timer0 (Q4) Timer0 Note 1: 6.2 T0 T0 + 2 Delay from clock input change to Timer0 increment is 3TOSC to 7TOSC. (Duration of Q = TOSC). Therefore, the error in measuring the interval between two edges on Timer0 input = 4TOSC max. 2: External clock if no prescaler selected; prescaler output otherwise. 3: The arrows indicate the points in time where sampling occurs. Prescaler An 8-bit counter is available as a prescaler for the Timer0 module or as a postscaler for the Watchdog Timer (WDT), respectively (see Figure 10-12). For simplicity, this counter is being referred to as "prescaler" throughout this data sheet. Note: T0 + 1 When assigned to the Timer0 module, all instructions writing to the TMR0 register (e.g., CLRF 1, MOVWF 1, BSF 1, x, etc.) will clear the prescaler. When assigned to WDT, a CLRWDT instruction will clear the prescaler along with the WDT. The prescaler is neither readable nor writable. On a Reset, the prescaler contains all `0's. The prescaler may be used by either the Timer0 module or the WDT, but not both. Thus, a prescaler assignment for the Timer0 module means that there is no prescaler for the WDT and vice-versa. The PSA and PS<2:0> bits (OPTION<3:0>) determine prescaler assignment and prescale ratio. (c) 2007 Microchip Technology Inc. DS41268D-page 41 PIC12F510/16F506 6.2.1 SWITCHING PRESCALER ASSIGNMENT To change prescaler from the WDT to the Timer0 module, use the sequence shown in Example 6-2. This sequence must be used even if the WDT is disabled. A CLRWDT instruction should be executed before switching the prescaler. The prescaler assignment is fully under software control (i.e., it can be changed "on-the-fly" during program execution). To avoid an unintended device Reset, the following instruction sequence (Example 6-1) must be executed when changing the prescaler assignment from Timer0 to the WDT. EXAMPLE 6-2: CHANGING PRESCALER (WDTTIMER0) CLRWDT EXAMPLE 6-1: CHANGING PRESCALER (TIMER0 WDT) CLRWDT CLRF TMR0 MOVLW `00xx1111'b OPTION CLRWDT MOVLW `00xx1xxx'b OPTION FIGURE 6-5: MOVLW ;Clear WDT ;Clear TMR0 & Prescaler ;These 3 lines (5, 6, 7) ;are required only if ;desired ;PS<2:0> are 000 or 001 ;Set Postscaler to ;desired WDT rate `xxxx0xxx' ;Clear WDT and ;prescaler ;Select TMR0, new ;prescale value and ;clock source OPTION BLOCK DIAGRAM OF THE TIMER0/WDT PRESCALER T0CKI(2) Pin TCY (= FOSC/4) Data Bus 8 0 1 Comparator Output 1 M U X 1 M U X 0 0 T0SE(1) T0CS(1) Sync 2 Cycles TMR0 Reg PSA(1) C1T0CS(3) 0 Watchdog Timer 1 M U X 8-bit Prescaler 8 8-to-1 MUX PS<2:0>(1) PSA(1) WDT Enable bit 1 0 MUX PSA(1) WDT Time-Out Note 1: T0CS, T0SE, PSA, PS<2:0> are bits in the OPTION register. 2: T0CKI is shared with pin GP2 on the PIC12F510 and shared with RC5 on the PIC16F506. 3: Bit C1T0CS is located in the CM1CON0 register. DS41268D-page 42 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 7.0 COMPARATOR(S) The PIC12F510 contains one analog comparator module. The PIC16F506 contains two comparators and a comparator voltage reference. REGISTER 7-1: CM1CON0: COMPARATOR C1 CONTROL REGISTER (PIC12F510) R-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 C1OUT C1OUTEN C1POL C1T0CS C1ON C1NREF C1PREF C1WU bit 7 bit 0 Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' -n = Value at POR `1' = Bit is set `0' = Bit is cleared bit 7 C1OUT: Comparator Output bit 1 = VIN+ > VIN0 = VIN+ < VIN- bit 6 C1OUTEN: Comparator Output Enable bit(1), (2) 1 = Output of comparator is NOT placed on the C1OUT pin 0 = Output of comparator is placed in the C1OUT pin bit 5 C1POL: Comparator Output Polarity bit(2) 1 = Output of comparator is not inverted 0 = Output of comparator is inverted bit 4 C1T0CS: Comparator TMR0 Clock Source bit(2) 1 = TMR0 clock source selected by T0CS control bit 0 = Comparator output used as TMR0 clock source bit 3 C1ON: Comparator Enable bit 1 = Comparator is on 0 = Comparator is off bit 2 C1NREF: Comparator Negative Reference Select bit(2) 1 = C1IN- pin 0 = 0.6V internal reference bit 1 C1PREF: Comparator Positive Reference Select bit(2) 1 = C1IN+ pin 0 = C1IN- pin bit 0 C1WU: Comparator Wake-up On Change Enable bit(2) 1 = Wake-up On Comparator Change is disabled 0 = Wake-up On Comparator Change is enabled Note 1: 2: x = Bit is unknown Overrides T0CS bit for TRIS control of RB2. When comparator is turned on, these control bits assert themselves. (c) 2007 Microchip Technology Inc. DS41268D-page 43 PIC12F510/16F506 REGISTER 7-2: CM1CON0: COMPARATOR C1 CONTROL REGISTER (PIC16F506) R-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 C1OUT C1OUTEN C1POL C1T0CS C1ON C1NREF C1PREF C1WU bit 7 bit 0 Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' -n = Value at POR `1' = Bit is set `0' = Bit is cleared bit 7 C1OUT: Comparator Output bit 1 = VIN+ > VIN0 = VIN+ < VIN- bit 6 C1OUTEN: Comparator Output Enable bit(1), (2) 1 = Output of comparator is NOT placed on the C1OUT pin 0 = Output of comparator is placed in the C1OUT pin bit 5 C1POL: Comparator Output Polarity bit(2) 1 = Output of comparator is not inverted 0 = Output of comparator is inverted bit 4 C1T0CS: Comparator TMR0 Clock Source bit(2) 1 = TMR0 clock source selected by T0CS control bit 0 = Comparator output used as TMR0 clock source bit 3 C1ON: Comparator Enable bit 1 = Comparator is on 0 = Comparator is off bit 2 C1NREF: Comparator Negative Reference Select bit(2) 1 = C1IN- pin 0 = 0.6V internal reference bit 1 C1PREF: Comparator Positive Reference Select bit(2) 1 = C1IN+ pin 0 = C1IN- pin bit 0 C1WU: Comparator Wake-up On Change Enable bit(2) 1 = Wake-up On Comparator Change is disabled 0 = Wake-up On Comparator Change is enabled Note 1: 2: x = Bit is unknown Overrides T0CS bit for TRIS control of RB2. When comparator is turned on, these control bits assert themselves. Otherwise, the other registers have precedence. DS41268D-page 44 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 REGISTER 7-3: CM2CON0: COMPARATOR C2 CONTROL REGISTER (PIC16F506) R-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 C2OUT C2OUTEN C2POL C2PREF2 C2ON C2NREF C2PREF1 C2WU bit 7 bit 0 Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' -n = Value at POR `1' = Bit is set `0' = Bit is cleared bit 7 C2OUT: Comparator Output bit 1 = VIN+ > VIN0 = VIN+ < VIN- bit 6 C2OUTEN: Comparator Output Enable bit(1), (2) 1 = Output of comparator is NOT placed on the C2OUT pin 0 = Output of comparator is placed in the C2OUT pin bit 5 C2POL: Comparator Output Polarity bit(2) 1 = Output of comparator not inverted 0 = Output of comparator inverted bit 4 C2PREF2: Comparator Positive Reference Select bit(2) 1 = C1IN+ pin 0 = C2IN- pin bit 3 C2ON: Comparator Enable bit 1 = Comparator is on 0 = Comparator is off bit 2 C2NREF: Comparator Negative Reference Select bit(2) 1 = C2IN- pin 0 = CVREF bit 1 C2PREF1: Comparator Positive Reference Select bit(2) 1 = C2IN+ pin 0 = C2PREF2 controls analog input selection bit 0 C2WU: Comparator Wake-up on Change Enable bit(2) 1 = Wake-up on Comparator change is disabled 0 = Wake-up on Comparator change is enabled. Note 1: 2: x = Bit is unknown Overrides TOCS bit for TRIS control of RC4. When comparator is turned on, these control bits assert themselves. Otherwise, the other registers have precedence. (c) 2007 Microchip Technology Inc. DS41268D-page 45 PIC12F510/16F506 FIGURE 7-1: COMPARATOR 1 BLOCK DIAGRAM FOR PIC12F510/16F506 C1PREF To Data Bus C1IN- MUX 0 C1IN+ RD_CM1CON0 1 D C1WUF Q Q3 * RD_CM1CON0 C1NREF EN CL NRESET C1ON(1) C1WU C1OUTEN C1IN- + 0.6V (Internal Reference) MUX 1 - C1OUT C1 C1OUT 0 C1POL Note 1: When C1ON = 0, the comparator, C1, will produce a `0' output to the XOR Gate. FIGURE 7-2: COMPARATOR 2 BLOCK DIAGRAM (PIC16F506 ONLY) To Data Bus RD_CM2CON0 D C2PREF1 C2PREF2 C2ON(1) 1 1 MUX C1IN+ 0 + C2WU C2OUT C2 - C2OUTEN 0 C2IN- EN CL NRESET MUX C2IN+ Q3 * RD_CM2CON0 C2WUF Q C2NREF C2POL C2OUT 1 MUX C2IN- CVREF Note 1: 0 When C2ON = 0, the comparator, C2, will produce a `0' output to the XOR Gate. DS41268D-page 46 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 7.1 Comparator Operation A single comparator is shown in Figure 7-3 along with the relationship between the analog input levels and the digital output. When the analog input at VIN+ is less than the analog input VIN-, the output of the comparator is a digital low level. The shaded area of the output of the comparator in Figure 7-3 represent the uncertainty due to input offsets and response time. See Table 13-1 for Common Mode Voltage. FIGURE 7-3: SINGLE COMPARATOR VIN+ + VIN- - Result Note: 7.5 Analog levels on any pin that is defined as a digital input may cause the input buffer to consume more current than is specified. Comparator Wake-up Flag The Comparator Wake-up Flag is set whenever all of the following conditions are met: * C1WU = 0 (CM1CON0<0>) or C2WU = 0 (CM2CON0<0>) * CM1CON0 or CM2CON0 has been read to latch the last known state of the C1OUT and C2OUT bit (MOVF CM1CON0, W) * Device is in Sleep * The output of a comparator has changed state The wake-up flag may be cleared in software or by another device Reset. 7.6 VIN- Comparator Operation During Sleep VIN+ When the comparator is enabled it is active. To minimize power consumption while in Sleep mode, turn off the comparator before entering Sleep. Result 7.7 7.2 Comparator Reference An internal reference signal may be used depending on the comparator operating mode. The analog signal that is present at VIN- is compared to the signal at VIN+, and the digital output of the comparator is adjusted accordingly (Figure 7-3). Please see Section 8.0 "Comparator Voltage Reference Module (PIC16F506 only)" for internal reference specifications. 7.3 Comparator Response Time Response time is the minimum time after selecting a new reference voltage or input source before the comparator output is to have a valid level. If the comparator inputs are changed, a delay must be used to allow the comparator to settle to its new state. Please see Table 13-1 for comparator response time specifications. 7.4 Effects of Reset A Power-on Reset (POR) forces the CM2CON0 register to its Reset state. This forces the Comparator input pins to analog Reset mode. Device current is minimized when analog inputs are present at Reset time. 7.8 Analog Input Connection Considerations A simplified circuit for an analog input is shown in Figure 7-4. Since the analog pins are connected to a digital output, they have reverse biased diodes to VDD and VSS. The analog input, therefore, must be between VSS and VDD. If the input voltage deviates from this range by more than 0.6V in either direction, one of the diodes is forward biased and a latch-up may occur. A maximum source impedance of 10 k is recommended for the analog sources. Any external component connected to an analog input pin, such as a capacitor or a Zener diode, should have very little leakage current. Comparator Output The comparator output is read through the CM1CON0 or CM2CON0 register. This bit is read-only. The comparator output may also be used externally, see Figure 7-3. (c) 2007 Microchip Technology Inc. DS41268D-page 47 PIC12F510/16F506 FIGURE 7-4: ANALOG INPUT MODE VDD VT = 0.6V RS < 10 K RIC AIN CPIN 5 pF VA ILEAKAGE 500 nA VT = 0.6V VSS Legend: TABLE 7-1: Add CPIN VT ILEAKAGE RIC RS VA = = = = = = Input Capacitance Threshold Voltage Leakage Current at the Pin Interconnect Resistance Source Impedance Analog Voltage REGISTERS ASSOCIATED WITH COMPARATOR MODULE Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on POR Value on All Other Resets GPWUF CWUF PA0 TO PD Z DC C 0001 1xxx qq0q quuu 07h (1) CM1CON0 C1OUT C1OUTEN C1POL C1T0CS C1ON C1NREF C1PREF C1WU 1111 1111 uuuu uuuu 08h CM1CON0(2) C1OUT C1OUTEN C1POL C1T0CS C1ON C1NREF C1PREF C1WU 1111 1111 uuuu uuuu 0Bh CM2CON0(2) C2OUT C2OUTEN C2POL C2PREF2 C2ON C2NREF C2PREF1 C2WU 1111 1111 uuuu uuuu N/A TRISB(2) -- -- I/O Control Register --11 1111 --11 1111 N/A TRISC(2) -- -- I/O Control Register --11 1111 --11 1111 N/A TRISGPIO(1) -- -- I/O Control Register --11 1111 --11 1111 03h Legend: Note 1: 2: STATUS x = Unknown, u = Unchanged, - = Unimplemented, read as `0', q = Depends on condition. PIC12F510 only. PIC16F506 only. DS41268D-page 48 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 8.0 COMPARATOR VOLTAGE REFERENCE MODULE (PIC16F506 ONLY) 8.2 The comparator voltage reference module also allows the selection of an internally generated voltage reference for one of the C2 comparator inputs. The VRCON register (Register 8-1) controls the voltage reference module shown in Figure 8-1. 8.1 Configuring The Voltage Reference The voltage reference can output 32 voltage levels; 16 in a high range and 16 in a low range. Equation 8-1 determines the output voltages: Voltage Reference Accuracy/Error The full range of VSS to VDD cannot be realized due to construction of the module. The transistors on the top and bottom of the resistor ladder network (Figure 8-1) keep CVREF from approaching VSS or VDD. The exception is when the module is disabled by clearing the VREN bit (VRCON<7>). When disabled, the reference voltage is VSS when VR<3:0> is `0000' and the VRR (VRCON<5>) bit is set. This allows the comparator to detect a zero-crossing and not consume the CVREF module current. The voltage reference is VDD derived and, therefore, the CVREF output changes with fluctuations in VDD. The tested absolute accuracy of the comparator voltage reference can be found in Section 13.2 "DC Characteristics: PIC12F510/16F506 (Extended)". EQUATION 8-1: VRR = 1 (low range): CVREF = (VR<3:0>/24) x VDD VRR = 0 (high range): CVREF = (VDD/4) + (VR<3:0> x VDD/32) REGISTER 8-1: VRCON: VOLTAGE REFERENCE CONTROL REGISTER (PIC16F506 ONLY) R/W-0 R/W-0 R/W-1 U-1 R/W-1 R/W-1 R/W-1 R/W-1 VREN VROE VRR -- VR3 VR2 VR1 VR0 bit 7 bit 0 Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as `0', except if denoted otherwise -n = Value at POR `1' = Bit is set `0' = Bit is cleared bit 7 VREN: CVREF Enable bit 1 = CVREF is powered on 0 = CVREF is powered down, no current is drawn bit 6 VROE: CVREF Output Enable bit(1) 1 = CVREF output is enabled 0 = CVREF output is disabled bit 5 VRR: CVREF Range Selection bit 1 = Low range 0 = High range bit 4 Unimplemented: Read as `1' bit 3-0 VR<3:0> CVREF Value Selection bit When VRR = 1: CVREF= (VR<3:0>/24)*VDD When VRR = 0: CVREF= VDD/4+(VR<3:0>/32)*VDD Note 1: 2: x = Bit is unknown When this bit is set, the TRIS for the CVREF pin is overridden and the analog voltage is placed on the CVREF pin. CVREF controls for ratio metric reference applies to Comparator 2 on the PIC16F506 only. (c) 2007 Microchip Technology Inc. DS41268D-page 49 PIC12F510/16F506 FIGURE 8-1: COMPARATOR VOLTAGE REFERENCE BLOCK DIAGRAM 16 Stages 8R R R R R VDD 8R VRR 16-1 Analog MUX VREN CVREF to Comparator 2 Input VR<3:0> RC2/CVREF VREN VR<3:0> = 0000 VRR VROE TABLE 8-1: Add Name REGISTERS ASSOCIATED WITH COMPARATOR VOLTAGE REFERENCE Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on POR Value on all other Resets 0Ch VRCON VREN VROE VRR -- VR3 VR2 VR1 VR0 001- 1111 001- 1111 08h CM1CON0(1) C1OUT C1OUTEN C1POL C1T0CS C1ON C1NREF C1PREF C1WU 1111 1111 uuuu uuuu 0Bh CM2CON0(1) C2OUT C2OUTEN C2POL C2PREF2 C2ON C2NREF C2PREF1 C2WU 1111 1111 uuuu uuuu Legend: Note 1: x = unknown, u = unchanged, - = unimplemented, read as `0'. PIC16F506 only. DS41268D-page 50 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 9.0 ANALOG-TO-DIGITAL (A/D) CONVERTER The A/D Converter allows conversion of an analog signal into an 8-bit digital signal. 9.1 Clock Divisors The ADC has 4 clock source settings ADCS<1:0>. There are 3 divisor values 16, 8 and 4. The fourth setting is INTOSC with a divisor of 4. These settings will allow a proper conversion when using an external oscillator at speeds from 20 MHz to 350 kHz. Using an external oscillator at a frequency below 350 kHz (TAD > 50 s) requires the ADC oscillator setting to be INTOSC/4 for valid ADC results. The ADC requires 13 TAD periods to complete a conversion. The divisor values do not affect the number of TAD periods required to perform a conversion. The divisor values determine the length of the TAD period. When the ADCS<1:0> bits are changed while an ADC conversion is in process, the new ADC clock source will not be selected until the next conversion is started. This clock source selection will be lost when the device enters Sleep. 9.1.1 VOLTAGE REFERENCE There is no external voltage reference for the ADC. The ADC reference voltage will always be VDD. 9.1.2 ANALOG MODE SELECTION The ANS<1:0> bits are used to configure pins for analog input. Upon any Reset, ANS<1:0> defaults to 11. This configures pins AN0, AN1 and AN2 as analog inputs. Pins configured as analog inputs are not available for digital output. Users should not change the ANS bits while a conversion is in process. ANS bits are active regardless of the condition of ADON. 9.1.3 When the CHS<1:0> bits are changed during an ADC conversion, the new channel will not be selected until the current conversion is completed. This allows the current conversion to complete with valid results. All channel selection information will be lost when the device enters Sleep. TABLE 9-1: CHANNEL SELECT (ADCS) BITS AFTER AN EVENT Event MCLR ADCS<1:0> 11 Conversion completed CS<1:0> Conversion terminated CS<1:0> Power-on 11 Wake from Sleep 11 9.1.4 THE GO/DONE BIT The GO/DONE bit is used to determine the status of a conversion, to start a conversion and to manually halt a conversion in process. Setting the GO/DONE bit starts a conversion. When the conversion is complete, the ADC module clears the GO/DONE bit. A conversion can be terminated by manually clearing the GO/DONE bit while a conversion is in process. Manual termination of a conversion may result in a partially converted result in ADRES. The GO/DONE bit is cleared when the device enters Sleep, stopping the current conversion. The ADC does not have a dedicated oscillator, it runs off of the instruction clock. Therefore, no conversion can occur in sleep. The GO/DONE bit cannot be set when ADON is clear. ADC CHANNEL SELECTION The CHS bits are used to select the analog channel to be sampled by the ADC. The CHS<1:0> bits can be changed at any time without adversely effecting a conversion. To acquire an analog signal the CHS<1:0> selection must match one of the pin(s) selected by the ANS<1:0> bits. When the ADC is on (ADON = 1) and a channel is selected that is also being used by the comparator, then both the comparator and the ADC will see the analog voltage on the pin. Note: It is the users responsibility to ensure that use of the ADC and comparator simultaneously on the same pin, does not adversely affect the signal being monitored or adversely effect device operation. (c) 2007 Microchip Technology Inc. DS41268D-page 51 PIC12F510/16F506 9.1.5 SLEEP This ADC does not have a dedicated ADC clock, and therefore, no conversion in Sleep is possible. If a conversion is underway and a Sleep command is executed, the GO/DONE and ADON bit will be cleared. This will stop any conversion in process and powerdown the ADC module to conserve power. Due to the nature of the conversion process, the ADRES may contain a partial conversion. At least 1 bit must have been converted prior to Sleep to have partial conversion data in ADRES. The ADCS and CHS bits are reset to their default condition; ANS<1:0> = 11 and CHS<1:0> = 11. * For accurate conversions, TAD must meet the following: * 500 ns < TAD < 50 s * TAD = 1/(FOSC/divisor) Shaded areas indicate TAD out of range for accurate conversions. If analog input is desired at these frequencies, use INTOSC/4 for the ADC clock source. TABLE 9-2: Source TAD FOR ADCS SETTINGS WITH VARIOUS OSCILLATORS ADCS <1:0> Divisor 20(1) MHz 16(1) MHz 11 4 -- -- .5 s 1 s INTOSC 8 MHz 4 MHz 1 MHz -- 500 kHz 350 kHz 200 kHz 100 kHz 32 kHz -- -- -- -- -- FOSC 10 4 .2 s .25 s .5 s 1 s 4 s 8 s 11 s 20 s 40 s 125 s FOSC 01 8 .4 s .5 s 1 s 2 s 8 s 16 s 23 s 40 s 80 s 250 s FOSC 00 16 .8 s 1 s 2 s 4 s 16 s 32 s 46 s 80 s 160 s 500 s Note 1: When operating with external oscillator frequencies of 16 MHz or higher, better ADC performance will result from selection of a suitable FOSC divisor value from Table 9-2 than from use of the INTOSC/4 option for the ADC clock. TABLE 9-3: EFFECTS OF SLEEP ON ADCON0 ANS1 Entering Sleep ANS0 Unchanged Unchanged Wake or Reset DS41268D-page 52 1 1 ADCS1 ADCS0 CHS1 CHS0 GO/DONE ADON 1 1 1 1 0 0 1 1 1 1 0 0 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 9.1.6 ANALOG CONVERSION RESULT REGISTER The ADRES register contains the results of the last conversion. These results are present during the sampling period of the next analog conversion process. After the sampling period is over, ADRES is cleared (= 0). A `leading one' is then right shifted into the ADRES to serve as an internal conversion complete bit. As each bit weight, starting with the MSB, is converted, the leading one is shifted right and the converted bit is stuffed into ADRES. After a total of 9 right REGISTER 9-1: shifts of the `leading one' have taken place, the conversion is complete; the `leading one' has been shifted out and the GO/DONE bit is cleared. If the GO/DONE bit is cleared in software during a conversion, the conversion stops. The data in ADRES is the partial conversion result. This data is valid for the bit weights that have been converted. The position of the `leading one' determines the number of bits that have been converted. The bits that were not converted before the GO/DONE was cleared are unrecoverable. ADCON0: A/D CONTROL REGISTER (PIC12F510) R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-0 R/W-0 ANS1 ANS0 ADCS1 ADCS0 CHS1 CHS0 GO/DONE ADON bit 7 bit 0 Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' -n = Value at POR `1' = Bit is set `0' = Bit is cleared x = Bit is unknown bit 7-6 ANS<1:0>: ADC Analog Input Pin Select bits(1), (2) 00 = No pins configured for analog input 01 = AN2 configured as an analog input 10 = AN2 and AN0 configured as analog inputs 11 = AN2, AN1 and AN0 configured as analog inputs bit 5-4 ADCS<1:0>: ADC Conversion Clock Select bits 00 = FOSC/16 01 = FOSC/8 10 = FOSC/4 11 = INTOSC/4 bit 3-2 CHS<1:0>: ADC Channel Select bits 00 = Channel AN0 01 = Channel AN1 10 = Channel AN2 11 = 0.6V absolute voltage reference bit 1 GO/DONE: ADC Conversion Status bit(4) 1 = ADC conversion in progress. Setting this bit starts an ADC conversion cycle. This bit is automatically cleared by hardware when the ADC is done converting. 0 = ADC conversion completed/not in progress. Manually clearing this bit while a conversion is in process terminates the current conversion. bit 0 ADON: ADC Enable bit 1 = ADC module is operating 0 = ADC module is shut-off and consumes no power Note 1: 2: 3: 4: When the ANS bits are set, the channels selected will automatically be forced into Analog mode, regardless of the pin function previously defined. The only exception to this is the comparator, where the analog input to the comparator and the ADC will be active at the same time. It is the users responsibility to ensure that the ADC loading on the comparator input does not affect their application. The ANS<1:0> bits are active regardless of the condition of ADON. CHS<1:0> bits default to 11 after any Reset. If the ADON bit is clear, the GO/DONE bit cannot be set. (c) 2007 Microchip Technology Inc. DS41268D-page 53 PIC12F510/16F506 REGISTER 9-2: ADRES REGISTER R-X R-X R-X R-X R-X R-X R-X R-X ADRES7 ADRES6 ADRES5 ADRES4 ADRES3 ADRES2 ADRES1 ADRES0 bit 7 bit 0 Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as `0' -n = Value at POR `1' = Bit is set `0' = Bit is cleared EXAMPLE 9-1: PERFORMING AN ANALOG-TO-DIGITAL CONVERSION EXAMPLE 9-2: ;Sample code operates out of BANK0 loop0 MOVLW 0xF1 ;configure A/D MOVWF ADCON0 BSF ADCON0, 1 ;start conversion BTFSC ADCON0, 1;wait for `DONE' GOTO loop0 MOVF ADRES, W ;read result MOVWF result0 ;save result loop1 ;setup for read of ;channel 1 BSF ADCON0, 1 ;start conversion BTFSC ADCON0, 1;wait for `DONE' GOTO loop1 MOVF ADRES, W ;read result MOVWF result1 ;save result loop2 BSF ADCON0, 3 ;setup for read of BCF ADCON0, 2 ;channel 2 BSF ADCON0, 1 ;start conversion BTFSC ADCON0, 1;wait for `DONE' GOTO loop2 MOVF ADRES, W ;read result MOVWF result2 ;save result CHANNEL SELECTION CHANGE DURING CONVERSION MOVLW 0xF1 MOVWF ADCON0 BSF ADCON0, 1 BSF ADCON0, 2 ;configure A/D loop0 ;start conversion ;setup for read of ;channel 1 BTFSC ADCON0, 1;wait for `DONE' GOTO loop0 MOVF ADRES, W ;read result MOVWF result0 ;save result loop1 BSF ADCON0, 1 ;start conversion BSF ADCON0, 3 ;setup for read of BCF ADCON0, 2 ;channel 2 BTFSC ADCON0, 1;wait for `DONE' GOTO loop1 MOVF ADRES, W ;read result MOVWF result1 ;save result BSF ADCON0, 2 DS41268D-page 54 x = Bit is unknown loop2 BSF ADCON0, 1 ;start conversion BTFSC ADCON0, 1;wait for `DONE' GOTO loop2 MOVF ADRES, W ;read result MOVWF result2 ;save result CLRF ADCON0 ;optional: returns ;pins to Digital mode and turns off ;the ADC module (c) 2007 Microchip Technology Inc. PIC12F510/16F506 10.0 SPECIAL FEATURES OF THE CPU What sets a microcontroller apart from other processors are special circuits that deal with the needs of realtime applications. The PIC12F510/16F506 microcontrollers have a host of such features intended to maximize system reliability, minimize cost through elimination of external components, provide powersaving operating modes and offer code protection. These features are: 10.1 Configuration Bits The PIC12F510/16F506 Configuration Words consist of 12 bits. Configuration bits can be programmed to select various device configurations. Three bits are for the selection of the oscillator type; (two bits on the PIC12F510), one bit is the Watchdog Timer enable bit, one bit is the MCLR enable bit and one bit is for code protection (Register 10-1, Register 10-2). * Oscillator Selection * Reset: - Power-on Reset (POR) - Device Reset Timer (DRT) - Wake-up from Sleep on Pin Change * Watchdog Timer (WDT) * Sleep * Code Protection * ID Locations * In-Circuit Serial ProgrammingTM (ICSPTM) * Clock Out The PIC12F510/16F506 devices have a Watchdog Timer, which can be shut off only through Configuration bit WDTE. It runs off of its own RC oscillator for added reliability. If using HS (PIC16F506), XT or LP selectable oscillator options, there is always a delay, provided by the Device Reset Timer (DRT), intended to keep the chip in Reset until the crystal oscillator is stable. If using INTOSC, EXTRC or EC there is an 1.125 ms (nominal) delay only on VDD power-up. With this timer on-chip, most applications need no external Reset circuitry. The Sleep mode is designed to offer a very low-current Power-Down mode. The user can wake-up from Sleep through a change-on-input pin or through a Watchdog Timer time-out. Several oscillator options are also made available to allow the part to fit the application, including an internal 4/8 MHz oscillator. The EXTRC oscillator option saves system cost while the LP crystal option saves power. A set of Configuration bits are used to select various options. (c) 2007 Microchip Technology Inc. DS41268D-page 55 PIC12F510/16F506 REGISTER 10-1: -- CONFIG: CONFIGURATION WORD REGISTER (PIC12F510)(1) -- -- -- -- -- -- bit 15 -- bit 8 -- -- IOSCFS MCLRE CP WDTE bit 7 FOSC1 FOSC0 bit 0 bit 15-6 Unimplemented: Read as `1' bit 5 IOSCFS: Internal Oscillator Frequency Select bit 1 = 8 MHz INTOSC speed 0 = 4 MHz INTOSC speed bit 4 MCLRE: Master Clear Enable bit 1 = GP3/MCLR pin functions as MCLR 0 = GP3/MCLR pin functions as GP3, MCLR internally tied to VDD bit 3 CP: Code Protection bit 1 = Code protection off 0 = Code protection on bit 2 WDTE: Watchdog Timer Enable bit 1 = WDT enabled 0 = WDT disabled bit 1-0 FOSC<1:0>: Oscillator Selection bits 00 = LP oscillator with 18 ms DRT 01 = XT oscillator with 18 ms DRT 10 = INTOSC with 1.125 ms DRT (2) 11 = EXTRC with 1.125 ms DRT (2) Note 1: 2: Refer to the "PIC12F510 Memory Programming Specification" (DS41257) to determine how to access the Configuration Word. It is the responsibility of the application designer to ensure the use of the 1.125 ms (nominal) DRT will result in acceptable operation. Refer to Electrical Specifications for VDD rise time and stability requirements for this mode of operation. DS41268D-page 56 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 REGISTER 10-2: -- CONFIG: CONFIGURATION WORD REGISTER (PIC16F506)(1) -- -- -- -- -- -- -- bit 15 bit 8 -- IOSCFS MCLRE CP WDTE FOSC2 FOSC1 bit 7 FOSC0 bit 0 bit 11-7 Unimplemented: Read as `1' bit 6 IOSCFS: Internal Oscillator Frequency Select bit 1 = 8 MHz INTOSC speed 0 = 4 MHz INTOSC speed bit 5 MCLRE: Master Clear Enable bit 1 = RB3/MCLR pin functions as MCLR 0 = RB3/MCLR pin functions as RB3, MCLR tied internally to VDD bit 4 CP: Code Protection bit 1 = Code protection off 0 = Code protection on bit 3 WDTE: Watchdog Timer Enable bit 1 = WDT enabled 0 = WDT disabled bit 2-0 FOSC<2:0>: Oscillator Selection bits 000 = LP oscillator and 18 ms DRT 001 = XT oscillator and 18 ms DRT 010 = HS oscillator and 18 ms DRT 011 = EC oscillator with RB4 function on RB4/OSC2/CLKOUT and 1.125 ms DRT(2) 100 = INTOSC with RB4 function on RB4/OSC2/CLKOUT and 1.125 ms DRT(2) 101 = INTOSC with CLKOUT function on RB4/OSC2/CLKOUT and 1.125 ms DRT(2) 110 = EXTRC with RB4 function on RB4/OSC2/CLKOUT and 1.125 ms DRT (2) 111 = EXTRC with CLKOUT function on RB4/OSC2/CLKOUT and 1.125 ms DRT(2) Note 1: 2: Refer to the "PIC16F506 Memory Programming Specification" (DS41258) to determine how to access the Configuration Word. It is the responsibility of the application designer to ensure the use of the 1.125 ms (nominal) DRT will result in acceptable operation. Refer to Electrical Specifications for VDD rise time and stability requirements for this mode of operation. (c) 2007 Microchip Technology Inc. DS41268D-page 57 PIC12F510/16F506 10.2 10.2.1 Oscillator Configurations FIGURE 10-1: OSCILLATOR TYPES The PIC12F510/16F506 devices can be operated in up to six different oscillator modes. The user can program up to three Configuration bits (FOSC<1:0> [PIC12F510], FOSC<2:0> [PIC16F506]). To select one of these modes: Low-Power Crystal Crystal/Resonator High-Speed Crystal/Resonator (PIC16F506 only) *INTOSC: Internal 4/8 MHz Oscillator *EXTRC: External Resistor/Capacitor *EC: External High-Speed Clock Input (PIC16F506 only) C1(1) *LP: *XT: *HS: 10.2.2 CRYSTAL OPERATION (OR CERAMIC RESONATOR) (HS, XT OR LP OSC CONFIGURATION) Note 1: Note 1: This device has been designed to perform to the parameters of its data sheet. It has been tested to an electrical specification designed to determine its conformance with these parameters. Due to process differences in the manufacture of this device, this device may have different performance characteristics than its earlier version. These differences may cause this device to perform differently in your application than the earlier version of this device. 2: The user should verify that the device oscillator starts and performs as expected. Adjusting the loading capacitor values and/or the Oscillator mode may be required. DS41268D-page 58 RS (2) RF(3) To internal logic OSC2 See Capacitor Selection tables for recommended values of C1 and C2. A series resistor (RS) may be required for AT strip cut crystals. RF approx. value = 10 M. 2: 3: CRYSTAL OSCILLATOR/CERAMIC RESONATORS In HS (PIC16F506), XT or LP modes, a crystal or ceramic resonator is connected to the (GP5/RB5)/ OSC1/(CLKIN) and (GP4/RB4)/OSC2/(CLKOUT) pins to establish oscillation (Figure 10-1). The PIC12F510/ 16F506 oscillator designs require the use of a parallel cut crystal. Use of a series cut crystal may give a frequency out of the crystal manufacturers specifications. When in HS (PIC16F506), XT or LP modes, the device can have an external clock source drive the (GP5/ RB5)/OSC1/CLKIN pin (Figure 10-2). When the part is used in this fashion, the output drive levels on the OSC2 pin are very weak. This pin should be left open and unloaded. Also, when using this mode, the external clock should observe the frequency limits for the clock mode chosen (HS, XT or LP). Sleep XTAL C2(1) PIC12F510 PIC16F506 OSC1 FIGURE 10-2: EXTERNAL CLOCK INPUT OPERATION (HS, XT OR LP OSC CONFIGURATION) OSC1 Clock from ext. system Open TABLE 10-1: PIC12F510 PIC16F506 OSC2 CAPACITOR SELECTION FOR CERAMIC RESONATORS - PIC12F510/16F506(1) Osc. Type Resonator Freq. Cap. Range C1 Cap. Range C2 XT 4.0 MHz 30 pF 30 pF 16 MHz 10-47 pF 10-47 pF HS(2) Note 1: 2: These values are for design guidance only. Since each resonator has its own characteristics, the user should consult the resonator manufacturer for appropriate values of external components. PIC16F506 only. (c) 2007 Microchip Technology Inc. PIC12F510/16F506 TABLE 10-2: CAPACITOR SELECTION FOR CRYSTAL OSCILLATOR - PIC12F510/16F506(2) Osc. Type Resonator Freq. Cap.Range C1 Cap. Range C2 LP 32 kHz(1) 15 pF 15 pF XT 200 kHz 1 MHz 4 MHz 47-68 pF 15 pF 15 pF 47-68 pF 15 pF 15 pF 20 MHz 15-47 pF 15-47 pF HS(3) Note 1: 2: 3: 10.2.3 For VDD > 4.5V, C1 = C2 30 pF is recommended. These values are for design guidance only. Rs may be required to avoid overdriving crystals beyond the drive level specification. Since each crystal has its own characteristics, the user should consult the crystal manufacturer for appropriate values of external components. PIC16F506 only. EXTERNAL CRYSTAL OSCILLATOR CIRCUIT Either a prepackaged oscillator or a simple oscillator circuit with TTL gates can be used as an external crystal oscillator circuit. Prepackaged oscillators provide a wide operating range and better stability. A well-designed crystal oscillator will provide good performance with TTL gates. Two types of crystal oscillator circuits can be used: one with parallel resonance or one with series resonance. Figure 10-3 shows implementation of a parallel resonant oscillator circuit. The circuit is designed to use the fundamental frequency of the crystal. The 74AS04 inverter performs the 180-degree phase shift that a parallel oscillator requires. The 4.7 k resistor provides the negative feedback for stability. The 10 k potentiometers bias the 74AS04 in the linear region. This circuit could be used for external oscillator designs. FIGURE 10-3: EXTERNAL PARALLEL RESONANT CRYSTAL OSCILLATOR CIRCUIT +5V To Other Devices 10k 74AS04 4.7k CLKIN 74AS04 PIC12F510 PIC16F506 10k XTAL 10k 20 pF 20 pF Figure 10-4 shows a series resonant oscillator circuit. This circuit is also designed to use the fundamental frequency of the crystal. The inverter performs a 180degree phase shift in a series resonant oscillator circuit. The 330 resistors provide the negative feedback to bias the inverters in their linear region. FIGURE 10-4: 330 EXTERNAL SERIES RESONANT CRYSTAL OSCILLATOR CIRCUIT To Other Devices 330 74AS04 74AS04 74AS04 CLKIN 10.2.4 0.1 mF PIC12F510 XTAL PIC16F506 EXTERNAL RC OSCILLATOR For timing insensitive applications, the EXTRC device option offers additional cost savings. The EXTRC oscillator frequency is a function of the supply voltage, the resistor (REXT) and capacitor (CEXT) values, and the operating temperature. In addition to this, the oscillator frequency will vary from unit-to-unit due to normal process parameter variation. Furthermore, the difference in lead frame capacitance between package types will also affect the oscillation frequency, especially for low CEXT values. The user also needs to take into account variation due to tolerance of external R and C components used. Figure 10-5 shows how the R/C combination is connected to the PIC12F510/16F506 devices. For REXT values below 5.0 k, the oscillator operation may become unstable or stop completely. For very high REXT values (e.g., 1 M), the oscillator becomes sensitive to noise, humidity and leakage. Thus, we recommend keeping REXT between 5.0 k and 100 k. (c) 2007 Microchip Technology Inc. DS41268D-page 59 PIC12F510/16F506 Although the oscillator will operate with no external capacitor (CEXT = 0 pF), we recommend using values above 20 pF for noise and stability reasons. With no capacitance or small external capacitance, the oscillation frequency can vary dramatically due to changes in external capacitances, such as PCB trace capacitance or package lead frame capacitance. Section 13.0 "Electrical Characteristics", shows RC frequency variation from part-to-part due to normal process variation. The variation is larger for larger values of R (since leakage current variation will affect RC frequency more for large R) and for smaller values of C (since variation of input capacitance will affect RC frequency more). Also, see the Electrical Specifications section for variation of oscillator frequency due to VDD for given REXT/CEXT values, as well as frequency variation due to operating temperature for given R, C and VDD values. FIGURE 10-5: EXTERNAL RC OSCILLATOR MODE VDD In addition, a calibration instruction is programmed into the last address of memory, which contains the calibration value for the internal RC oscillator. This location is always uncode protected, regardless of the code-protect settings. This value is programmed as a MOVLW XX instruction where XX is the calibration value, and is placed at the Reset vector. This will load the W register with the calibration value upon Reset and the PC will then roll over to the users program at address 0x000. The user then has the option of writing the value to the OSCCAL Register (05h) or ignoring it. OSCCAL, when written to with the calibration value, will "trim" the internal oscillator to remove process variation from the oscillator frequency. Note: For the PIC12F510/16F506 devices, only bits <7:1> of OSCCAL are used for calibration. See Register 4-5 for more information. Note: REXT OSC1 Internal clock Erasing the device will also erase the preprogrammed internal calibration value for the internal oscillator. The calibration value must be read prior to erasing the part so it can be reprogrammed correctly later. The 0 bit of OSCCAL is unimplemented and should be written as `0' when modifying OSCCAL for compatibility with future devices. N CEXT PIC12F510 VSS PIC16F506 FOSC/4 10.2.5 OSC2/CLKOUT INTERNAL 4/8 MHz RC OSCILLATOR The internal RC oscillator provides a fixed 4/8 MHz (nominal) system clock (see Section 13.0 "Electrical Characteristics" for information on variation over voltage and temperature). DS41268D-page 60 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 10.3 Reset The device differentiates between various kinds of Reset: * * * * * * * Power-on Reset (POR) MCLR Reset during normal operation MCLR Reset during Sleep WDT Time-out Reset during normal operation WDT Time-out Reset during Sleep Wake-up from Sleep Reset on pin change Wake-up from Sleep Reset on comparator change Some registers are not reset in any way, they are unknown on POR and unchanged in any other Reset. Most other registers are reset to "Reset state" on Power-on Reset (POR), MCLR, WDT or Wake-up from Sleep Reset on pin change or wake-up from Sleep Reset on comparator change. The exceptions are TO, PD, CWUF and RBWUF/GPWUF bits. They are set or cleared differently in different Reset situations. These bits are used in software to determine the nature of Reset. See Table 10-4 for a full description of Reset states of all registers. TABLE 10-3: RESET CONDITIONS FOR REGISTERS - PIC12F510 Address Power-on Reset MCLR Reset, WDT Time-out, Wake-up On Pin Change, Wake-up on Comparator Change -- qqqq qqqu(1) qqqq qqqu(1) INDF 00h xxxx xxxx uuuu uuuu TMR0 01h xxxx xxxx uuuu uuuu PCL 02h 1111 1111 1111 1111 STATUS 03h 0001 1xxx qq0q quuu(2) FSR 04h 110x xxxx 11uu uuuu OSCCAL 05h 1111 111- uuuu uuu- GPIO 06h --xx xxxx --uu uuuu CM1CON0 07h 1111 1111 uuuu uuuu ADCON0 08h 1111 1100 uu11 1100 ADRES 09h xxxx xxxx uuuu uuuu OPTION -- 1111 1111 1111 1111 TRISIO -- --11 1111 --11 1111 Register W Legend: u = unchanged, x = unknown, - = unimplemented bit, read as `0', q = value depends on condition. Note 1: Bits <7:2> of W register contain oscillator calibration values due to MOVLW XX instruction at top of memory. 2: See Table 10-5 for Reset value for specific conditions. (c) 2007 Microchip Technology Inc. DS41268D-page 61 PIC12F510/16F506 TABLE 10-4: RESET CONDITIONS FOR REGISTERS - PIC16F506 Register Address W -- Power-on Reset MCLR Reset, WDT Time-out, Wake-up On Pin Change, Wake-up on Comparator Change qqqq qqqu(1) qqqq qqqu(1) INDF 00h xxxx xxxx uuuu uuuu TMR0 01h xxxx xxxx uuuu uuuu PCL 02h 1111 1111 1111 1111 STATUS 03h 0001 1xxx 10uq quuu(2) FSR 04h 100x xxxx 10uu uuuu OSCCAL 05h 1111 111- uuuu uuu- PORTB 06h --xx xxxx --uu uuuu PORTC 07h --xx xxxx --uu uuuu CM1CON0 08h 1111 1111 uuuu uuuu ADCON0 09h 1111 1100 uu11 1100 ADRES 0Ah xxxx xxxx uuuu uuuu CM2CON0 0Bh 1111 1111 uuuu uuuu VRCON 0Ch 0011 1111 uuuu uuuu OPTION -- 1111 1111 1111 1111 TRISB -- --11 1111 --11 1111 TRISC -- --11 1111 --11 1111 Legend: u = unchanged, x = unknown, - = unimplemented bit, read as `0', q = value depends on condition. Note 1: Bits <7:2> of W register contain oscillator calibration values due to MOVLW XX instruction at top of memory. 2: See Table 10-5 for Reset value for specific conditions. TABLE 10-5: RESET CONDITION FOR SPECIAL REGISTERS STATUS Addr: 03h PCL Addr: 02h Power-on Reset 0001 1xxx 1111 1111 MCLR Reset during normal operation 000u uuuu 1111 1111 MCLR Reset during Sleep 0001 0uuu 1111 1111 WDT Reset during Sleep 0000 0uuu 1111 1111 WDT Reset normal operation 0000 uuuu 1111 1111 Wake-up from Sleep Reset on pin change 1001 0uuu 1111 1111 Wake from Sleep Reset on Comparator Change 0101 0uuu 1111 1111 Legend: u = unchanged, x = unknown, - = unimplemented bit, read as `0'. DS41268D-page 62 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 10.3.1 MCLR ENABLE This Configuration bit, when unprogrammed (left in the `1' state), enables the external MCLR function. When programmed, the MCLR function is tied to the internal VDD and the pin is assigned to be a I/O. See Figure 10-6. FIGURE 10-6: MCLR SELECT GPWU/RBWU (GP3/RB3)/MCLR/VPP Internal MCLR MCLRE 10.4 Power-on Reset (POR) The PIC12F510/16F506 devices incorporate an onchip Power-on Reset (POR) circuitry, which provides an internal chip Reset for most power-up situations. The on-chip POR circuit holds the chip in Reset until VDD has reached a high enough level for proper operation. The POR is active regardless of the state of the MCLR enable bit. An internal weak pull-up resistor is implemented using a transistor (refer to Table 13-3 for the pull-up resistor ranges). This will eliminate external RC components usually needed to create an external Power-on Reset. A maximum rise time for VDD is specified. See Section 13.0 "Electrical Characteristics" for details. When the devices start normal operation (exit the Reset condition), device operating parameters (voltage, frequency, temperature,...) must be met to ensure operation. If these conditions are not met, the devices must be held in Reset until the operating parameters are met. (c) 2007 Microchip Technology Inc. A simplified block diagram of the on-chip Power-on Reset circuit is shown in Figure 10-7. The Power-on Reset circuit and the Device Reset Timer (see Section 10.5 "Device Reset Timer (DRT)") circuit are closely related. On power-up, the Reset latch is set and the DRT is reset. The DRT timer begins counting once it detects MCLR, internal or external, to be high. After the time-out period, it will reset the Reset latch and thus end the on-chip Reset signal. A power-up example where MCLR is held low is shown in Figure 10-8. VDD is allowed to rise and stabilize before bringing MCLR high. The chip will actually come out of Reset TDRT msec after MCLR goes high. In Figure 10-9, the on-chip Power-on Reset feature is being used (MCLR and VDD are tied together or the pin is programmed to be (GP3/RB3). The VDD is stable before the Start-up timer times out and there is no problem in getting a proper Reset. However, Figure 10-10 depicts a problem situation where VDD rises too slowly. The time between when the DRT senses that MCLR is high and when MCLR and VDD actually reach their full value, is too long. In this situation, when the start-up timer times out, VDD has not reached the VDD (min) value and the chip may not function correctly. For such situations, we recommend that external RC circuits be used to achieve longer POR delay times (Figure 10-9). Note: When the devices start normal operation (exit the Reset condition), device operating parameters (voltage, frequency, temperature, etc.) must be met to ensure operation. If these conditions are not met, the device must be held in Reset until the operating conditions are met. For additional information, refer to Application Notes AN522, "Power-Up Considerations" (DS00522) and AN607, "Power-up Trouble Shooting" (DS00607). DS41268D-page 63 PIC12F510/16F506 FIGURE 10-7: SIMPLIFIED BLOCK DIAGRAM OF ON-CHIP RESET CIRCUIT VDD Power-up Detect POR (Power-on Reset) (GP3/RB3)/MCLR/VPP MCLR Reset S Q R Q MCLRE WDT Time-out Pin Change Sleep WDT Reset Start-up Timer (10 ms, 1.125 ms or 18 ms) CHIP Reset Wake-up on pin Change Reset Comparator Change Wake-up on Comparator Change TIME-OUT SEQUENCE ON POWER-UP (MCLR PULLED LOW) FIGURE 10-8: VDD MCLR Internal POR TDRT DRT Time-out Internal Reset FIGURE 10-9: TIME-OUT SEQUENCE ON POWER-UP (MCLR TIED TO VDD): FAST VDD RISE TIME VDD MCLR Internal POR TDRT DRT Time-out Internal Reset DS41268D-page 64 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 FIGURE 10-10: TIME-OUT SEQUENCE ON POWER-UP (MCLR TIED TO VDD): SLOW VDD RISE TIME V1 VDD MCLR Internal POR TDRT DRT Time-out Internal Reset Note: When VDD rises slowly, the TDRT time-out expires long before VDD has reached its final value. In this example, the chip will reset properly if, and only if, V1 VDD min. (c) 2007 Microchip Technology Inc. DS41268D-page 65 PIC12F510/16F506 10.5 Device Reset Timer (DRT) On the PIC12F510/16F506 devices, the DRT runs any time the device is powered up. DRT runs from Reset and varies based on oscillator selection and Reset type (see Table 10-6). The DRT operates from a free running on-chip oscillator that is separate from INTOSC. The processor is kept in Reset as long as the DRT is active. The DRT delay allows VDD to rise above VDD minimum and for the oscillator to stabilize. Oscillator circuits, based on crystals or ceramic resonators, require a certain time after power-up to establish a stable oscillation. The on-chip DRT keeps the devices in a Reset for a set period, as stated in Table 10-6, after MCLR has reached a logic high (VIH MCLR) level. Programming (GP3/RB3)/MCLR/VPP as MCLR and using an external RC network connected to the MCLR input is not required in most cases. This allows savings in cost-sensitive and/or space restricted applications, as well as allowing the use of the (GP3/RB3)/MCLR/ VPP pin as a general purpose input. The DRT delays will vary from chip-to-chip due to VDD, temperature and process variation. See AC parameters for details. The DRT will also be triggered upon a Watchdog Timer time-out from Sleep. This is particularly important for applications using the WDT to wake from Sleep mode automatically. Reset sources are POR, MCLR, WDT time-out, Wakeup on Pin Change and Wake-up on Comparator Change. See Section 10.9.2 "Wake-up from Sleep Reset", Notes 1, 2 and 3. 10.6 Watchdog Timer (WDT) The Watchdog Timer (WDT) is a free running on-chip RC oscillator that does not require any external components. This RC oscillator is separate from the external RC oscillator of the (GP5/RB5)/OSC1/CLKIN pin and the internal 4/8 MHz oscillator. This means that the WDT will run even if the main processor clock has been stopped, for example, by execution of a SLEEP instruction. During normal operation or Sleep, a WDT Reset or wake-up Reset generates a device Reset. TABLE 10-6: TYPICAL DRT PERIODS POR Reset Subsequent Resets LP 18 ms 18 ms XT 18 ms 18 ms HS(1) 18 ms 18 ms EC(1) 1.125 ms 10 s INTOSC 1.125 ms 10 s EXTRC 1.125 ms 10 s Oscillator Configuration Note 1: Note: 10.6.1 PIC16F506 only It is the responsibility of the application designer to ensure the use of the 1.125 ms nominal DRT will result in acceptable operation. Refer to Electrical Specifications for VDD rise time and stability requirements for this mode of operation. WDT PERIOD The WDT has a nominal time-out period of 18 ms (with no prescaler). If a longer time-out period is desired, a prescaler with a divisor ratio of up to 1:128 can be assigned to the WDT (under software control) by writing to the OPTION register. Thus, a time-out period of a nominal 2.3 seconds can be realized. These periods vary with temperature, VDD and part-to-part process variations (see DC specs). Under worst-case conditions (VDD = Min., Temperature = Max., max. WDT prescaler), it may take several seconds before a WDT time-out occurs. 10.6.2 WDT PROGRAMMING CONSIDERATIONS The CLRWDT instruction clears the WDT and the postscaler, if assigned to the WDT, and prevents it from timing out and generating a device Reset. The SLEEP instruction resets the WDT and the postscaler, if assigned to the WDT. This gives the maximum Sleep time before a WDT wake-up Reset. The TO bit (STATUS<4>) will be cleared upon a Watchdog Timer Reset. The WDT can be permanently disabled by programming the configuration WDTE as a `0' (see Section 10.1 "Configuration Bits"). Refer to the PIC12F510/16F506 Programming Specifications to determine how to access the Configuration Word. DS41268D-page 66 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 FIGURE 10-11: WATCHDOG TIMER BLOCK DIAGRAM From Timer0 Clock Source (Figure 6-5) 0 Watchdog Timer 1 M U X Postscaler 8-to-1 MUX PS<2:0> PSA WDTE To Timer0 (Figure 6-4) 0 1 MUX PSA WDT Time-out Note 1: TABLE 10-7: Address T0CS, T0SE, PSA, PS<2:0> are bits in the OPTION register. SUMMARY OF REGISTERS ASSOCIATED WITH THE WATCHDOG TIMER Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 Value on Power-On Reset Value on All Other Resets N/A OPTION(1) GPWU GPPU T0CS T0SE PSA PS2 PS1 PS0 1111 1111 1111 1111 N/A OPTION(2) RBWU RBPU T0CS T0SE PSA PS2 PS1 PS0 1111 1111 1111 1111 Legend: Shaded boxes = Not used by Watchdog Timer. - = unimplemented, read as `0', u = unchanged. Note 1: PIC12F510 only. 2: PIC16F506 only. (c) 2007 Microchip Technology Inc. DS41268D-page 67 PIC12F510/16F506 10.7 Time-out Sequence, Power-down and Wake-up from Sleep Status Bits (TO, PD, GPWUF/RBWUF) FIGURE 10-13: VDD VDD The TO, PD and (GPWUF/RBWUF) bits in the STATUS register can be tested to determine if a Reset condition has been caused by a power-up condition, a MCLR or Watchdog Timer (WDT) Reset. TABLE 10-8: R1 Q1 R2 TO/PD/(GPWUF/RBWUF) STATUS AFTER RESET GPWUF/ TO RBWUF CWUF PD Reset Caused By 0 0 0 0 WDT wake-up from Sleep 0 0 0 u WDT time-out (not from Sleep) 0 0 1 0 MCLR wake-up from Sleep 0 0 1 1 Power-up 0 0 u u MCLR not during Sleep 0 1 1 0 Wake-up from Sleep on pin change 1 0 1 0 Wake-up from Sleep on comparator change Note 1: To reset PIC12F510/16F506 devices when a brownout occurs, external brown-out protection circuits may be built, as shown in Figure 10-12 and Figure 10-13. FIGURE 10-12: MCLR(2) This brown-out circuit is less expensive, although less accurate. Transistor Q1 turns off when VDD is below a certain level such that: 2: R1 R1 + R2 = 0.7V Pin must be configured as MCLR. FIGURE 10-14: BROWN-OUT PROTECTION CIRCUIT 3 VDD MCP809 VSS Bypass Capacitor VDD VDD RST MCLR PIC12F510 PIC16F506 Reset on Brown-out A brown-out is a condition where device power (VDD) dips below its minimum value, but not to zero, and then recovers. The device should be reset in the event of a brown-out. PIC12F510 PIC16F506 40k(1) VDD * Legend: u = unchanged 10.8 BROWN-OUT PROTECTION CIRCUIT 2 Note: This brown-out protection circuit employs Microchip Technology's MCP809 microcontroller supervisor. There are 7 different trip point selections to accommodate 5V to 3V systems. BROWN-OUT PROTECTION CIRCUIT 1 VDD VDD 33k PIC12F510 PIC16F506 10k Q1 MCLR(2) 40k(1) Note 1: 2: This circuit will activate Reset when VDD goes below Vz + 0.7V (where Vz = Zener voltage). Pin must be configured as MCLR. DS41268D-page 68 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 10.9 Power-Down Mode (Sleep) A device may be powered down (Sleep) and later powered up (wake-up from Sleep Reset). 10.9.1 SLEEP The Power-Down mode is entered by executing a SLEEP instruction. If enabled, the Watchdog Timer will be cleared but keeps running, the TO bit (STATUS<4>) is set, the PD bit (STATUS<3>) is cleared and the oscillator driver is turned off. The I/O ports maintain the status they had before the SLEEP instruction was executed (driving high, driving low or high-impedance). Note: A device Reset generated by a WDT time-will not drive the MCLR pin low. For lowest current consumption while powered down, all input pins should be at VDD or VSS and (GP3/RB3)/ MCLR/VPP pin must be at a logic high level if MCLR is enabled. 10.9.2 WAKE-UP FROM SLEEP RESET The device can wake-up from Sleep through one of the following events: 1. 2. 3. 4. An external Reset input on (GP3/RB3)/MCLR/ VPP pin when configured as MCLR. A Watchdog Timer Time-out Reset (if WDT was enabled). A change-on-input pin GP0/RB0, GP1/RB1, GP3/RB3 or RB4 when wake-up on change is enabled. A change in the comparator ouput bits, C1OUT and C2OUT (if comparator wake-up is enabled). These events cause a device Reset. The TO, PD, CWUF and GPWUF/RBWUF bits can be used to determine the cause of device Reset. The TO bit is cleared if a WDT time-out occurred (and caused wake-up). The PD bit, which is set on power-up, is cleared when SLEEP is invoked. The CWUF bit indicates a change in comparator output state while the device was in Sleep. The GPWUF/RBWUF bit indicates a change in state while in Sleep at pins GP0/RB0, GP1/RB1, GP3/RB3 or RB4 (since the last file or bit operation on GP/RB port). Note: Note 1: Caution: Right before entering Sleep, read the comparator Configuration register(s) CM1CON0 and CM2CON0. When in Sleep, wake-up occurs when the comparator output bit C1OUT and C2OUT change from the state they were in at the last reading. If a wake-up on comparator change occurs and the pins are not read before re-entering Sleep, a wake-up will occur immediately, even if no pins change while in Sleep mode. 2: For 16F506 only. The WDT is cleared when the device wakes from Sleep, regardless of the wake-up source. 10.10 Program Verification/Code Protection If the code protection bit has not been programmed, the on-chip program memory can be read out for verification purposes. The first 64 locations and the last location (OSCCAL) can be read, regardless of the code protection bit setting. The last memory location can be read regardless of the code protection bit setting on the PIC12F510/16F506 devices. 10.11 ID Locations Four memory locations are designated as ID locations where the user can store checksum or other code identification numbers. These locations are not accessible during normal execution, but are readable and writable during Program/Verify. Use only the lower 4 bits of the ID locations and always set the upper 4 bits as `1's. The upper 4 bits are unimplemented. These locations can be read regardless of the code protect setting. Caution: Right before entering Sleep, read the input pins. When in Sleep, wakeup occurs when the values at the pins change from the state they were in at the last reading. If a wake-up on change occurs and the pins are not read before reentering Sleep, a wake-up will occur immediately even if no pins change while in Sleep mode. (c) 2007 Microchip Technology Inc. DS41268D-page 69 PIC12F510/16F506 10.12 In-Circuit Serial ProgrammingTM (ICSPTM) The PIC12F510/16F506 microcontrollers can be serially programmed while in the end application circuit. This is simply done with two lines for clock and data, and three other lines for power, ground and the programming voltage. This allows customers to manufacture boards with unprogrammed devices and then program the microcontroller just before shipping the product. This also allows the most recent firmware, or a custom firmware, to be programmed. The devices are placed into a Program/Verify mode by holding the GP1/RB1 and GP0/RB0 pins low while raising the MCLR (VPP) pin from VIL to VIHH (see programming specification). GP1/RB1 becomes the programming clock and GP0/RB0 becomes the programming data. Both GP1/RB1 and GP0/RB0 are Schmitt Trigger inputs in this mode. After Reset, a 6-bit command is supplied to the device. Depending on the command and if the command was a Load or a Read, 14 bits of program data are then supplied to or from the device. For complete details of serial programming, please refer to the PIC12F510/16F506 Programming Specifications. FIGURE 10-15: External Connector Signals TYPICAL IN-CIRCUIT SERIAL PROGRAMMING CONNECTION To Normal Connections PIC12F510 PIC16F506 +5V VDD 0V VSS VPP MCLR/VPP CLK GP1/RB1 Data I/O GP0/RB0 VDD To Normal Connections A typical In-Circuit Serial Programming connection is shown in Figure 10-15. DS41268D-page 70 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 11.0 INSTRUCTION SET SUMMARY The PIC16 instruction set is highly orthogonal and is comprised of three basic categories. * Byte-oriented operations * Bit-oriented operations * Literal and control operations Each PIC16 instruction is a 12-bit word divided into an opcode, which specifies the instruction type, and one or more operands which further specify the operation of the instruction. The formats for each of the categories is presented in Figure 11-1, while the various opcode fields are summarized in Table 11-1. For byte-oriented instructions, `f' represents a file register designator and `d' represents a destination designator. The file register designator specifies which file register is to be used by the instruction. The destination designator specifies where the result of the operation is to be placed. If `d' is `0', the result is placed in the W register. If `d' is `1', the result is placed in the file register specified in the instruction. For bit-oriented instructions, `b' represents a bit field designator which selects the number of the bits affected by the operation, while `f' represents the number of the file in which the bit is located. For literal and control operations, `k' represents an 8 or 9-bit constant or literal value. TABLE 11-1: Description Register file address (0x00 to 0x7F) W Working register (accumulator) b Bit address within an 8-bit file register k Literal field, constant data or label x Don't care location (= 0 or 1) The assembler will generate code with x = 0. It is the recommended form of use for compatibility with all Microchip software tools. d Destination select; d = 0 (store result in W) d = 1 (store result in file register `f') Default is d = 1 label TOS PC WDT GENERAL FORMAT FOR INSTRUCTIONS Byte-oriented file register operations 11 6 OPCODE 5 d 4 0 f (FILE #) d = 0 for destination W d = 1 for destination f f = 5-bit file register address Bit-oriented file register operations 11 OPCODE 8 7 5 4 b (BIT #) 0 f (FILE #) b = 3-bit bit address f = 5-bit file register address Literal and control operations (except GOTO) 11 8 7 OPCODE 0 k (literal) k = 8-bit immediate value Literal and control operations - GOTO instruction 11 9 8 OPCODE 0 k (literal) k = 9-bit immediate value Top-of-Stack Watchdog Timer counter Time-out bit Power-down bit dest Destination, either the W register or the specified register file location [ ] Options ( ) Contents FIGURE 11-1: Program Counter PD < > 0xhhh where `h' signifies a hexadecimal digit. Label name TO Figure 11-1 shows the three general formats that the instructions can have. All examples in the figure use the following format to represent a hexadecimal number: OPCODE FIELD DESCRIPTIONS Field f All instructions are executed within a single instruction cycle, unless a conditional test is true or the program counter is changed as a result of an instruction. In this case, the execution takes two instruction cycles. One instruction cycle consists of four oscillator periods. Thus, for an oscillator frequency of 4 MHz, the normal instruction execution time is 1 s. If a conditional test is true or the program counter is changed as a result of an instruction, the instruction execution time is 2 s. Assigned to Register bit field In the set of italics User defined term (font is courier) (c) 2007 Microchip Technology Inc. DS41268D-page 71 PIC12F510/16F506 TABLE 11-2: Mnemonic, Operands ADDWF ANDWF CLRF CLRW COMF DECF DECFSZ INCF INCFSZ IORWF MOVF MOVWF NOP RLF RRF SUBWF SWAPF XORWF INSTRUCTION SET SUMMARY Description Cycles 12-Bit Opcode MSb LSb Status Notes Affected f, d f, d f - f, d f, d f, d f, d f, d f, d f, d f - f, d f, d f, d f, d f, d 0001 11df ffff C, DC, Z 1, 2, 4 Add W and f 1 0001 01df ffff AND W with f 1 Z 2, 4 0000 011f ffff Clear f 1 Z 4 0000 0100 0000 Clear W 1 Z 0010 01df ffff Complement f 1 Z 0000 11df ffff Decrement f 1 Z 2, 4 0010 11df ffff Decrement f, Skip if 0 1(2) None 2, 4 1 0010 10df ffff Increment f Z 2, 4 1(2) 0011 11df ffff Increment f, Skip if 0 None 2, 4 1 0001 00df ffff Inclusive OR W with f Z 2, 4 1 0010 00df ffff Move f Z 2, 4 1 0000 001f ffff Move W to f None 1, 4 1 0000 0000 0000 No Operation None 1 0011 01df ffff Rotate left f through Carry C 2, 4 1 0011 00df ffff Rotate right f through Carry C 2, 4 1 0000 10df ffff C, DC, Z 1, 2, 4 Subtract W from f 1 0011 10df ffff Swap f None 2, 4 1 0001 10df ffff Exclusive OR W with f Z 2, 4 BIT-ORIENTED FILE REGISTER OPERATIONS 0100 bbbf ffff None 2, 4 1 Bit Clear f BCF f, b 0101 bbbf ffff None 2, 4 1 Bit Set f BSF f, b 0110 bbbf ffff None Bit Test f, Skip if Clear 1(2) BTFSC f, b 1(2) 0111 bbbf ffff None f, b Bit Test f, Skip if Set BTFSS LITERAL AND CONTROL OPERATIONS ANDLW k AND literal with W 1 1110 kkkk kkkk Z CALL 1 k Call Subroutine 2 1001 kkkk kkkk None CLRWDT - Clear Watchdog Timer 1 0000 0000 0100 TO, PD None GOTO k Unconditional branch 2 101k kkkk kkkk Z IORLW k Inclusive OR literal with W 1 1101 kkkk kkkk None MOVLW k Move literal to W 1 1100 kkkk kkkk None OPTION - Load OPTION register 1 0000 0000 0010 None RETLW k Return, place literal in W 2 1000 kkkk kkkk SLEEP - Go into Standby mode 1 0000 0000 0011 TO, PD None 3 TRIS f Load TRIS register 1 0000 0000 0fff Z XORLW k Exclusive OR literal to W 1 1111 kkkk kkkk Note 1: The 9th bit of the Program Counter will be forced to a `0' by any instruction that writes to the PC except for GOTO. See Section 4.6 "Program Counter". 2: When an I/O register is modified as a function of itself (e.g. MOVF PORTB, 1), the value used will be that value present on the pins themselves. For example, if the data latch is `1' for a pin configured as input and is driven low by an external device, the data will be written back with a `0'. 3: The instruction TRIS f, where f = 6, causes the contents of the W register to be written to the tri-state latches of PORTB. A `1' forces the pin to a high-impedance state and disables the output buffers. 4: If this instruction is executed on the TMR0 register (and, where applicable, d = 1), the prescaler will be cleared (if assigned to TMR0). DS41268D-page 72 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 ADDWF Add W and f BCF Bit Clear f Syntax: [ label ] ADDWF Syntax: [ label ] BCF Operands: 0 f 31 d [0,1] Operands: 0 f 31 0b7 Operation: (W) + (f) (dest) Operation: 0 (f<b>) Status Affected: C, DC, Z Status Affected: None Description: Description: Bit `b' in register `f' is cleared. f,d Add the contents of the W register and register `f'. If `d' is `0', the result is stored in the W register. If `d' is `1', the result is stored back in register `f'. f,b ANDLW AND literal with W BSF Bit Set f Syntax: [ label ] ANDLW Syntax: [ label ] BSF Operands: 0 k 255 Operands: Operation: (W).AND. (k) (W) 0 f 31 0b7 Status Affected: Z Operation: 1 (f<b>) Description: The contents of the W register are AND'ed with the eight-bit literal `k'. The result is placed in the W register. Status Affected: None Description: Bit `b' in register `f' is set. ANDWF AND W with f BTFSC Bit Test f, Skip if Clear Syntax: [ label ] ANDWF Syntax: [ label ] BTFSC f,b Operands: 0 f 31 d [0,1] Operands: 0 f 31 0b7 Operation: (W) .AND. (f) (dest) Operation: skip if (f<b>) = 0 Status Affected: Z Status Affected: None Description: Description: If bit `b' in register `f' is `0', then the next instruction is skipped. If bit `b' is `0', then the next instruction fetched during the current instruction execution is discarded, and a NOP is executed instead, making this a two-cycle instruction. k f,d The contents of the W register are AND'ed with register `f'. If `d' is `0', the result is stored in the W register. If `d' is `1', the result is stored back in register `f'. (c) 2007 Microchip Technology Inc. f,b DS41268D-page 73 PIC12F510/16F506 BTFSS Bit Test f, Skip if Set CLRW Clear W Syntax: [ label ] BTFSS f,b Syntax: [ label ] CLRW Operands: 0 f 31 0b<7 Operands: None Operation: 00h (W); 1Z Operation: skip if (f<b>) = 1 Status Affected: None Status Affected: Z Description: If bit `b' in register `f' is `1', then the next instruction is skipped. If bit `b' is `1', then the next instruction fetched during the current instruction execution, is discarded and a NOP is executed instead, making this a two-cycle instruction. Description: The W register is cleared. Zero bit (Z) is set. CALL Subroutine Call CLRWDT Clear Watchdog Timer Syntax: [ label ] CALL k Syntax: [ label ] CLRWDT Operands: 0 k 255 Operands: None Operation: (PC) + 1 Top-of-Stack; k PC<7:0>; (STATUS <6:5>) PC<10:9>; 0 PC<8> Operation: 00h WDT; 0 WDT prescaler (if assigned); 1 TO; 1 PD Status Affected: None Status Affected: TO, PD Description: Subroutine call. First, return address (PC + 1) is PUSHed onto the stack. The eight-bit immediate address is loaded into PC bits <7:0>. The upper bits PC<10:9> are loaded from STATUS <6:5>, PC<8> is cleared. CALL is a two-cycle instruction. Description: The CLRWDT instruction resets the WDT. It also resets the prescaler, if the prescaler is assigned to the WDT and not Timer0. Status bits TO and PD are set. CLRF Clear f COMF Complement f Syntax: [ label ] CLRF Syntax: [ label ] COMF Operands: 0 f 31 Operands: Operation: 00h (f); 1Z 0 f 31 d [0,1] Operation: (f) (dest) Status Affected: Z Status Affected: Z Description: The contents of register `f' are cleared and the Z bit is set. Description: The contents of register `f' are complemented. If `d' is `0', the result is stored in the W register. If `d' is `1', the result is stored back in register `f'. DS41268D-page 74 f f,d (c) 2007 Microchip Technology Inc. PIC12F510/16F506 DECF Decrement f INCF Increment f Syntax: [ label ] DECF f,d Syntax: [ label ] Operands: 0 f 31 d [0,1] Operands: 0 f 31 d [0,1] Operation: (f) - 1 (dest) Operation: (f) + 1 (dest) Status Affected: Z Status Affected: Z Description: Decrement register `f'. If `d' is `0', the result is stored in the W register. If `d' is `1', the result is stored back in register `f'. Description: The contents of register `f' are incremented. If `d' is `0', the result is placed in the W register. If `d' is `1', the result is placed back in register `f'. DECFSZ Decrement f, Skip if 0 INCFSZ Increment f, Skip if 0 Syntax: [ label ] DECFSZ f,d Syntax: [ label ] Operands: 0 f 31 d [0,1] Operands: 0 f 31 d [0,1] Operation: (f) - 1 d; Operation: (f) + 1 (dest), skip if result = 0 Status Affected: None Status Affected: None Description: The contents of register `f' are decremented. If `d' is `0', the result is placed in the W register. If `d' is `1', the result is placed back in register `f'. If the result is `0', the next instruction, which is already fetched, is discarded and a NOP is executed instead making it a two-cycle instruction. Description: The contents of register `f' are incremented. If `d' is `0', the result is placed in the W register. If `d' is `1', the result is placed back in register `f'. If the result is `0', then the next instruction, which is already fetched, is discarded and a NOP is executed instead making it a two-cycle instruction. GOTO Unconditional Branch IORLW Inclusive OR literal with W Syntax: [ label ] Syntax: [ label ] Operands: 0 k 511 Operands: 0 k 255 Operation: k PC<8:0>; STATUS <6:5> PC<10:9> Operation: (W) .OR. (k) (W) Status Affected: Z Status Affected: None Description: Description: GOTO is an unconditional branch. The 9-bit immediate value is loaded into PC bits <8:0>. The upper bits of PC are loaded from STATUS <6:5>. GOTO is a twocycle instruction. The contents of the W register are OR'ed with the eight-bit literal `k'. The result is placed in the W register. skip if result = 0 GOTO k (c) 2007 Microchip Technology Inc. INCF f,d INCFSZ f,d IORLW k DS41268D-page 75 PIC12F510/16F506 IORWF Inclusive OR W with f MOVWF Move W to f Syntax: [ label ] Syntax: [ label ] Operands: 0 f 31 d [0,1] Operands: 0 f 31 Operation: Operation: (W).OR. (f) (dest) (W) (f) Status Affected: None Status Affected: Z Description: Description: Inclusive OR the W register with register `f'. If `d' is `0', the result is placed in the W register. If `d' is `1', the result is placed back in register `f'. Move data from the W register to register `f'. MOVF Move f NOP No Operation Syntax: [ label ] Syntax: [ label ] Operands: 0 f 31 d [0,1] Operands: None Operation: No operation Operation: (f) (dest) Status Affected: None Status Affected: Z Description: No operation. Description: The contents of register `f' are moved to destination `d'. If `d' is `0', destination is the W register. If `d' is `1', the destination is file register `f'. `d' = 1 is useful as a test of a file register, since Status flag Z is affected. MOVLW Move Literal to W OPTION Syntax: [ label ] Syntax: [ label ] None (W) Option IORWF f,d MOVF f,d MOVLW k Operands: 0 k 255 Operands: Operation: k (W) Operation: Status Affected: None Description: The eight-bit literal `k' is loaded into the W register. The "don't cares" will be assembled as `0's. DS41268D-page 76 MOVWF f NOP Load OPTION Register Option Status Affected: None Description: The content of the W register is loaded into the OPTION register. (c) 2007 Microchip Technology Inc. PIC12F510/16F506 RETLW Return with Literal in W SLEEP Enter SLEEP Mode Syntax: [ label ] Syntax: [label ] Operands: 0 k 255 Operands: None Operation: k (W); TOS PC Operation: Status Affected: None Description: The W register is loaded with the eight-bit literal `k'. The program counter is loaded from the top of the stack (the return address). This is a two-cycle instruction. 00h WDT; 0 WDT prescaler; 1 TO; 0 PD Status Affected: TO, PD, RBWUF Description: Time-out Status bit (TO) is set. The Power-down Status bit (PD) is cleared. RBWUF is unaffected. The WDT and its prescaler are cleared. The processor is put into Sleep mode with the oscillator stopped. See Section 10.9 "Power-Down Mode (Sleep)" on Sleep for more details. RLF Rotate Left f through Carry SUBWF Subtract W from f Syntax: [ label ] RLF Syntax: [label ] Operands: 0 f 31 d [0,1] Operands: 0 f 31 d [0,1] Operation: See description below Operation: (f) - (W) (dest) Status Affected: C Status Affected: C, DC, Z Description: The contents of register `f' are rotated one bit to the left through the Carry flag. If `d' is `0', the result is placed in the W register. If `d' is `1', the result is stored back in register `f'. Description: Subtract (2's complement method) the W register from register `f'. If `d' is `0', the result is stored in the W register. If `d' is `1', the result is stored back in register `f'. Rotate Right f through Carry SWAPF Swap Nibbles in f Syntax: [ label ] Syntax: [ label ] SWAPF f,d Operands: 0 f 31 d [0,1] Operands: 0 f 31 d [0,1] Operation: See description below Operation: Status Affected: C (f<3:0>) (dest<7:4>); (f<7:4>) (dest<3:0>) Description: The contents of register `f' are rotated one bit to the right through the Carry flag. If `d' is `0', the result is placed in the W register. If `d' is `1', the result is placed back in register `f'. Status Affected: None Description: The upper and lower nibbles of register `f' are exchanged. If `d' is `0', the result is placed in W register. If `d' is `1', the result is placed in register `f'. RETLW k SUBWF f,d register `f' C RRF f,d SLEEP RRF f,d C (c) 2007 Microchip Technology Inc. register `f' DS41268D-page 77 PIC12F510/16F506 TRIS Load TRIS Register XORWF Exclusive OR W with f Syntax: [ label ] XORWF Operands: 0 f 31 d [0,1] Syntax: [ label ] TRIS Operands: f=6 f Operation: (W) TRIS register f Status Affected: None Operation: (W) .XOR. (f) (dest) Description: TRIS register `f' (f = 6 or 7) is loaded with the contents of the W register Status Affected: Z Description: Exclusive OR the contents of the W register with register `f'. If `d' is `0', the result is stored in the W register. If `d' is `1', the result is stored back in register `f'. XORLW Exclusive OR literal with W Syntax: [label ] Operands: 0 k 255 Operation: (W) .XOR. k (W) XORLW k Status Affected: Z Description: The contents of the W register are XOR'ed with the eight-bit literal `k'. The result is placed in the W register. DS41268D-page 78 f,d (c) 2007 Microchip Technology Inc. PIC12F510/16F506 12.0 DEVELOPMENT SUPPORT The PIC(R) microcontrollers are supported with a full range of hardware and software development tools: * Integrated Development Environment - MPLAB(R) IDE Software * Assemblers/Compilers/Linkers - MPASMTM Assembler - MPLAB C18 and MPLAB C30 C Compilers - MPLINKTM Object Linker/ MPLIBTM Object Librarian - MPLAB ASM30 Assembler/Linker/Library * Simulators - MPLAB SIM Software Simulator * Emulators - MPLAB ICE 2000 In-Circuit Emulator - MPLAB REAL ICETM In-Circuit Emulator * In-Circuit Debugger - MPLAB ICD 2 * Device Programmers - PICSTART(R) Plus Development Programmer - MPLAB PM3 Device Programmer - PICkitTM 2 Development Programmer * Low-Cost Demonstration and Development Boards and Evaluation Kits 12.1 MPLAB Integrated Development Environment Software The MPLAB IDE software brings an ease of software development previously unseen in the 8/16-bit microcontroller market. The MPLAB IDE is a Windows(R) operating system-based application that contains: * A single graphical interface to all debugging tools - Simulator - Programmer (sold separately) - Emulator (sold separately) - In-Circuit Debugger (sold separately) * A full-featured editor with color-coded context * A multiple project manager * Customizable data windows with direct edit of contents * High-level source code debugging * Visual device initializer for easy register initialization * Mouse over variable inspection * Drag and drop variables from source to watch windows * Extensive on-line help * Integration of select third party tools, such as HI-TECH Software C Compilers and IAR C Compilers The MPLAB IDE allows you to: * Edit your source files (either assembly or C) * One touch assemble (or compile) and download to PIC MCU emulator and simulator tools (automatically updates all project information) * Debug using: - Source files (assembly or C) - Mixed assembly and C - Machine code MPLAB IDE supports multiple debugging tools in a single development paradigm, from the cost-effective simulators, through low-cost in-circuit debuggers, to full-featured emulators. This eliminates the learning curve when upgrading to tools with increased flexibility and power. (c) 2007 Microchip Technology Inc. DS41268D-page 79 PIC12F510/16F506 12.2 MPASM Assembler The MPASM Assembler is a full-featured, universal macro assembler for all PIC MCUs. The MPASM Assembler generates relocatable object files for the MPLINK Object Linker, Intel(R) standard HEX files, MAP files to detail memory usage and symbol reference, absolute LST files that contain source lines and generated machine code and COFF files for debugging. The MPASM Assembler features include: * Integration into MPLAB IDE projects * User-defined macros to streamline assembly code * Conditional assembly for multi-purpose source files * Directives that allow complete control over the assembly process 12.3 MPLAB C18 and MPLAB C30 C Compilers The MPLAB C18 and MPLAB C30 Code Development Systems are complete ANSI C compilers for Microchip's PIC18 and PIC24 families of microcontrollers and the dsPIC30 and dsPIC33 family of digital signal controllers. These compilers provide powerful integration capabilities, superior code optimization and ease of use not found with other compilers. For easy source level debugging, the compilers provide symbol information that is optimized to the MPLAB IDE debugger. 12.4 MPLINK Object Linker/ MPLIB Object Librarian The MPLINK Object Linker combines relocatable objects created by the MPASM Assembler and the MPLAB C18 C Compiler. It can link relocatable objects from precompiled libraries, using directives from a linker script. 12.5 MPLAB ASM30 Assembler, Linker and Librarian MPLAB ASM30 Assembler produces relocatable machine code from symbolic assembly language for dsPIC30F devices. MPLAB C30 C Compiler uses the assembler to produce its object file. The assembler generates relocatable object files that can then be archived or linked with other relocatable object files and archives to create an executable file. Notable features of the assembler include: * * * * * * Support for the entire dsPIC30F instruction set Support for fixed-point and floating-point data Command line interface Rich directive set Flexible macro language MPLAB IDE compatibility 12.6 MPLAB SIM Software Simulator The MPLAB SIM Software Simulator allows code development in a PC-hosted environment by simulating the PIC MCUs and dsPIC(R) DSCs on an instruction level. On any given instruction, the data areas can be examined or modified and stimuli can be applied from a comprehensive stimulus controller. Registers can be logged to files for further run-time analysis. The trace buffer and logic analyzer display extend the power of the simulator to record and track program execution, actions on I/O, most peripherals and internal registers. The MPLAB SIM Software Simulator fully supports symbolic debugging using the MPLAB C18 and MPLAB C30 C Compilers, and the MPASM and MPLAB ASM30 Assemblers. The software simulator offers the flexibility to develop and debug code outside of the hardware laboratory environment, making it an excellent, economical software development tool. The MPLIB Object Librarian manages the creation and modification of library files of precompiled code. When a routine from a library is called from a source file, only the modules that contain that routine will be linked in with the application. This allows large libraries to be used efficiently in many different applications. The object linker/library features include: * Efficient linking of single libraries instead of many smaller files * Enhanced code maintainability by grouping related modules together * Flexible creation of libraries with easy module listing, replacement, deletion and extraction DS41268D-page 80 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 12.7 MPLAB ICE 2000 High-Performance In-Circuit Emulator The MPLAB ICE 2000 In-Circuit Emulator is intended to provide the product development engineer with a complete microcontroller design tool set for PIC microcontrollers. Software control of the MPLAB ICE 2000 In-Circuit Emulator is advanced by the MPLAB Integrated Development Environment, which allows editing, building, downloading and source debugging from a single environment. The MPLAB ICE 2000 is a full-featured emulator system with enhanced trace, trigger and data monitoring features. Interchangeable processor modules allow the system to be easily reconfigured for emulation of different processors. The architecture of the MPLAB ICE 2000 In-Circuit Emulator allows expansion to support new PIC microcontrollers. The MPLAB ICE 2000 In-Circuit Emulator system has been designed as a real-time emulation system with advanced features that are typically found on more expensive development tools. The PC platform and Microsoft(R) Windows(R) 32-bit operating system were chosen to best make these features available in a simple, unified application. 12.8 MPLAB REAL ICE In-Circuit Emulator System MPLAB REAL ICE In-Circuit Emulator System is Microchip's next generation high-speed emulator for Microchip Flash DSC(R) and MCU devices. It debugs and programs PIC(R) and dsPIC(R) Flash microcontrollers with the easy-to-use, powerful graphical user interface of the MPLAB Integrated Development Environment (IDE), included with each kit. The MPLAB REAL ICE probe is connected to the design engineer's PC using a high-speed USB 2.0 interface and is connected to the target with either a connector compatible with the popular MPLAB ICD 2 system (RJ11) or with the new high speed, noise tolerant, lowvoltage differential signal (LVDS) interconnection (CAT5). 12.9 MPLAB ICD 2 In-Circuit Debugger Microchip's In-Circuit Debugger, MPLAB ICD 2, is a powerful, low-cost, run-time development tool, connecting to the host PC via an RS-232 or high-speed USB interface. This tool is based on the Flash PIC MCUs and can be used to develop for these and other PIC MCUs and dsPIC DSCs. The MPLAB ICD 2 utilizes the in-circuit debugging capability built into the Flash devices. This feature, along with Microchip's In-Circuit Serial ProgrammingTM (ICSPTM) protocol, offers costeffective, in-circuit Flash debugging from the graphical user interface of the MPLAB Integrated Development Environment. This enables a designer to develop and debug source code by setting breakpoints, single stepping and watching variables, and CPU status and peripheral registers. Running at full speed enables testing hardware and applications in real time. MPLAB ICD 2 also serves as a development programmer for selected PIC devices. 12.10 MPLAB PM3 Device Programmer The MPLAB PM3 Device Programmer is a universal, CE compliant device programmer with programmable voltage verification at VDDMIN and VDDMAX for maximum reliability. It features a large LCD display (128 x 64) for menus and error messages and a modular, detachable socket assembly to support various package types. The ICSPTM cable assembly is included as a standard item. In Stand-Alone mode, the MPLAB PM3 Device Programmer can read, verify and program PIC devices without a PC connection. It can also set code protection in this mode. The MPLAB PM3 connects to the host PC via an RS-232 or USB cable. The MPLAB PM3 has high-speed communications and optimized algorithms for quick programming of large memory devices and incorporates an SD/MMC card for file storage and secure data applications. MPLAB REAL ICE is field upgradeable through future firmware downloads in MPLAB IDE. In upcoming releases of MPLAB IDE, new devices will be supported, and new features will be added, such as software breakpoints and assembly code trace. MPLAB REAL ICE offers significant advantages over competitive emulators including low-cost, full-speed emulation, real-time variable watches, trace analysis, complex breakpoints, a ruggedized probe interface and long (up to three meters) interconnection cables. (c) 2007 Microchip Technology Inc. DS41268D-page 81 PIC12F510/16F506 12.11 PICSTART Plus Development Programmer 12.13 Demonstration, Development and Evaluation Boards The PICSTART Plus Development Programmer is an easy-to-use, low-cost, prototype programmer. It connects to the PC via a COM (RS-232) port. MPLAB Integrated Development Environment software makes using the programmer simple and efficient. The PICSTART Plus Development Programmer supports most PIC devices in DIP packages up to 40 pins. Larger pin count devices, such as the PIC16C92X and PIC17C76X, may be supported with an adapter socket. The PICSTART Plus Development Programmer is CE compliant. A wide variety of demonstration, development and evaluation boards for various PIC MCUs and dsPIC DSCs allows quick application development on fully functional systems. Most boards include prototyping areas for adding custom circuitry and provide application firmware and source code for examination and modification. 12.12 PICkit 2 Development Programmer The PICkitTM 2 Development Programmer is a low-cost programmer and selected Flash device debugger with an easy-to-use interface for programming many of Microchip's baseline, mid-range and PIC18F families of Flash memory microcontrollers. The PICkit 2 Starter Kit includes a prototyping development board, twelve sequential lessons, software and HI-TECH's PICCTM Lite C compiler, and is designed to help get up to speed quickly using PIC(R) microcontrollers. The kit provides everything needed to program, evaluate and develop applications using Microchip's powerful, mid-range Flash memory family of microcontrollers. DS41268D-page 82 The boards support a variety of features, including LEDs, temperature sensors, switches, speakers, RS-232 interfaces, LCD displays, potentiometers and additional EEPROM memory. The demonstration and development boards can be used in teaching environments, for prototyping custom circuits and for learning about various microcontroller applications. In addition to the PICDEMTM and dsPICDEMTM demonstration/development board series of circuits, Microchip has a line of evaluation kits and demonstration software for analog filter design, KEELOQ(R) security ICs, CAN, IrDA(R), PowerSmart(R) battery management, SEEVAL(R) evaluation system, Sigma-Delta ADC, flow rate sensing, plus many more. Check the Microchip web page (www.microchip.com) and the latest "Product Selector Guide" (DS00148) for the complete list of demonstration, development and evaluation kits. (c) 2007 Microchip Technology Inc. PIC12F510/16F506 13.0 ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings Ambient temperature under bias.......................................................................................................... -40C to +125C Storage temperature ............................................................................................................................ -65C to +150C Voltage on VDD with respect to VSS ............................................................................................................... 0 to +7.0V Voltage on MCLR with respect to VSS.............................................................................................................0 to +14V Voltage on all other pins with respect to VSS ............................................................................... -0.3V to (VDD + 0.3V) Total power dissipation(1) .................................................................................................................................. 700 mW Max. current out of VSS pin ................................................................................................................................ 200 mA Max. current into VDD pin ................................................................................................................................... 150 mA Input clamp current, IIK (VI < 0 or VI > VDD)...................................................................................................................20 mA Output clamp current, IOK (VO < 0 or VO > VDD) ...........................................................................................................20 mA Max. output current sunk by any I/O pin .............................................................................................................. 25 mA Max. output current sourced by any I/O pin ......................................................................................................... 25 mA Max. output current sourced by I/O port ............................................................................................................ 100 mA Max. output current sunk by I/O port ................................................................................................................. 100 mA Note 1: Power dissipation is calculated as follows: PDIS = VDD x {IDD - IOH} + {(VDD-VOH) x IOH} + (VOL x IOL) NOTICE: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability. (c) 2007 Microchip Technology Inc. DS41268D-page 83 PIC12F510/16F506 VOLTAGE-FREQUENCY GRAPH, -40C TA +125C (PIC12F510) FIGURE 13-1: 6.0 5.5 5.0 VDD (Volts) 4.5 4.0 3.5 3.0 2.5 2.0 0 4 10 8 20 25 Frequency (MHz) FIGURE 13-2: MAXIMUM OSCILLATOR FREQUENCY TABLE (PIC12F510) Oscillator Mode LP XT EXTRC INTOSC 0 200 kHz 4 MHz 8 MHz 20 MHz Frequency (MHz) DS41268D-page 84 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 VOLTAGE FREQUENCY GRAPH, -40C TA +125C (PIC16F506) FIGURE 13-3: 6.0 5.5 5.0 VDD (Volts) 4.5 4.0 3.5 3.0 2.5 2.0 0 4 10 8 20 25 Frequency (MHz) FIGURE 13-4: MAXIMUM OSCILLATOR FREQUENCY TABLE (PIC16F506) Oscillator Mode LP XT EXTRC INTOSC EC HS 0 200 kHz 4 MHz 8 MHz 20 MHz Frequency (MHz) (c) 2007 Microchip Technology Inc. DS41268D-page 85 PIC12F510/16F506 13.1 DC Characteristics: PIC12F510/16F506 (Industrial) Standard Operating Conditions (unless otherwise specified) Operating Temperature 40C TA +85C (industrial) DC Characteristics Param No. Sym Characteristic Min Typ(1) Max Units Conditions D001 VDD Supply Voltage 2.0 5.5 V See Figure 14-1 D002 VDR RAM Data Retention Voltage(2) -- 1.5* -- V Device in Sleep mode D003 VPOR VDD Start Voltage to ensure Power-on Reset -- Vss -- V See Section 10.4 "Power-on Reset (POR)" for details D004 SVDD VDD Rise Rate to ensure Power-on Reset 0.05* -- -- V/ms See Section 10.4 "Power-on Reset (POR)" for details D010 IDD Supply Current(3,4) -- -- 175 0.625 275 1.1 A mA FOSC = 4 MHz, VDD = 2.0V FOSC = 4 MHz, VDD = 5.0V -- -- 250 1.0 450 1.5 A mA FOSC = 8 MHz, VDD = 2.0V FOSC = 8 MHz, VDD = 5.0V -- 1.4 2.0 mA FOSC = 20 MHz, VDD = 5.0V -- -- 11 38 15 52 A A FOSC = 32 kHz, VDD = 2.0V FOSC = 32 kHz, VDD = 5.0V D020 IPD Power-down Current(5) -- -- 0.1 0.35 1.2 2.4 A A VDD = 2.0V VDD = 5.0V D022 IWDT WDT Current(5) -- -- 1.0 7.0 3.0 16.0 A A VDD = 2.0V VDD = 5.0V D023 ICMP Comparator Current(5) -- -- 15 55 22 67 A A VDD = 2.0V (per comparator) VDD = 5.0V (per comparator) D022 ICVREF CVREF Current(5) -- -- 30 75 60 125 A A VDD = 2.0V (high range) VDD = 5.0V (high range) D023 IFVR -- 85 120 A -- 175 205 A VDD = 2.0V (0.6V reference and 1 comparator enabled) VDD = 5.0V (0.6V reference and 1 comparator enabled) -- 120 150 A 2.0V -- 200 250 A 5.0V D024 IAD Internal 0.6V Fixed Voltage Reference Current(5) A/D Conversion Current(5) * These parameters are characterized but not tested. Note 1: Data in the Typical ("Typ") column is based on characterization results at 25C. This data is for design guidance only and is not tested. 2: This is the limit to which VDD can be lowered in Sleep mode without losing RAM data. 3: The supply current is mainly a function of the operating voltage and frequency. Other factors such as bus loading, oscillator type, bus rate, internal code execution pattern and temperature also have an impact on the current consumption. 4: The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to VSS, T0CKI = VDD, MCLR = VDD; WDT enabled/disabled as specified. 5: For standby current measurements, the conditions are the same as IDD, except that the device is in Sleep mode. If a module current is listed, the current is for that specific module enabled and the device in Sleep. 6: Does not include current through REXT. The current through the resistor can be estimated by the formula: I = VDD/2REXT (mA) with REXT in k. DS41268D-page 86 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 13.2 DC Characteristics: PIC12F510/16F506 (Extended) Standard Operating Conditions (unless otherwise specified) Operating Temperature 40C TA +125C (extended) DC Characteristics Param No. Sym Characteristic Min Typ(1) Max Units Conditions D001 VDD Supply Voltage 2.0 5.5 V See Figure 14-1 D002 VDR RAM Data Retention Voltage(2) -- 1.5* -- V Device in Sleep mode D003 VPOR VDD Start Voltage to ensure Power-on Reset -- Vss -- V See Section 10.4 "Power-on Reset (POR)" for details D004 SVDD VDD Rise Rate to ensure Power-on Reset 0.05* -- -- V/ms See Section 10.4 "Power-on Reset (POR)" for details D010 IDD Supply Current(3,4) -- -- 175 0.625 275 1.1 A mA FOSC = 4 MHz, VDD = 2.0V FOSC = 4 MHz, VDD = 5.0V -- -- 250 1.0 450 1.5 A mA FOSC = 8 MHz, VDD = 2.0V FOSC = 8 MHz, VDD = 5.0V -- 1.4 2.0 mA FOSC = 20 MHz, VDD = 5.0V -- -- 11 38 16 54 A A FOSC = 32 kHz, VDD = 2.0V FOSC = 32 kHz, VDD = 5.0V D020 IPD Power-down Current(5) -- -- 0.1 0.35 9.0 15.0 A A VDD = 2.0V VDD = 5.0V D022 IWDT WDT Current(5) -- -- 1.0 7.0 18 22 A A VDD = 2.0V VDD = 5.0V D023 ICMP Comparator Current(5) -- -- 15 55 25 75 A A VDD = 2.0V (per comparator) VDD = 5.0V (per comparator) D022 ICVREF CVREF Current(5) -- -- 30 75 65 135 A A VDD = 2.0V (high range) VDD = 5.0V (high range) D023 IFVR -- 85 130 A -- 175 220 A VDD = 2.0V (0.6V reference and 1 comparator enabled) VDD = 5.0V (0.6V reference and 1 comparator enabled) -- 120 150 A 2.0V -- 200 250 A 5.0V D024 IAD Internal 0.6V Fixed Voltage Reference Current(5) A/D Conversion Current(5) * These parameters are characterized but not tested. Note 1: Data in the Typical ("Typ") column is based on characterization results at 25C. This data is for design guidance only and is not tested. 2: This is the limit to which VDD can be lowered in Sleep mode without losing RAM data. 3: The supply current is mainly a function of the operating voltage and frequency. Other factors such as bus loading, oscillator type, bus rate, internal code execution pattern and temperature also have an impact on the current consumption. 4: The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to VSS, T0CKI = VDD, MCLR = VDD; WDT enabled/disabled as specified. 5: For standby current measurements, the conditions are the same as IDD, except that the device is in Sleep mode. If a module current is listed, the current is for that specific module enabled and the device in Sleep. 6: Does not include current through REXT. The current through the resistor can be estimated by the formula: I = VDD/2REXT (mA) with REXT in k. (c) 2007 Microchip Technology Inc. DS41268D-page 87 PIC12F510/16F506 13.3 DC Characteristics: PIC12F510/16F506 (Industrial, Extended) Standard Operating Conditions (unless otherwise specified) Operating Temperature -40C TA +85C (industrial) -40C TA +125C (extended) DC CHARACTERISTICS Param No. Sym VIL Characteristic Min Typ Max Units Conditions Input Low Voltage I/O ports D030 with TTL buffer D030A VSS -- 0.8V V For 4.5 VDD 5.5V VSS -- 0.15 VDD V otherwise VSS -- 0.15 VDD V D031 with Schmitt Trigger buffer D032 MCLR, T0CKI VSS -- 0.15 VDD V D033 OSC1 (in EXTRC), EC(1) VSS -- 0.15 VDD V D033 OSC1 (in HS) VSS -- 0.3 VDD V D033 OSC1 (in XT and LP) VSS -- 0.3 VDD V 2.0 -- VDD V 4.5 VDD 5.5V 0.25 VDD -- VDD V Otherwise For entire VDD range VIH Input High Voltage I/O ports D040 -- with TTL buffer D040A + 0.8V D041 with Schmitt Trigger buffer 0.85 VDD -- VDD V D042 MCLR, T0CKI 0.85 VDD -- VDD V D043 OSC1 (in EXTRC), EC(1) 0.85 VDD -- VDD V D043 OSC1 (in HS) 0.7 VDD -- VDD V D043 OSC1 (in XT and LP) 1.6 -- VDD V GPIO/PORTB Weak Pull-up Current 50 250 400 A D070 IPUR IIL VDD = 5V, VPIN = VSS Input Leakage Current(2), (3) D060 I/O ports -- -- 1 A VSS VPIN VDD, Pin at high-impedance D062 GP3/RB3/MCLR(5) 50 250 400 A VDD = 5V D061A GP3/RB3/MCLR(4) -- +0.7 5 A VSS VPIN VDD D063 OSC1 -- -- 5 A VSS VPIN VDD, XT, HS and LP oscillator configuration Output Low Voltage D080 VOL I/O ports/CLKOUT D080A D083 OSC2 D083A -- -- 0.6 V IOL = 8.5 mA, VDD = 4.5V, -40C to +85C -- -- 0.6 V IOL = 7.0 mA, VDD = 4.5V, -40C to +125C -- -- 0.6 V IOL = 1.6 mA, VDD = 4.5V, -40C to +85C -- -- 0.6 V IOL = 1.2 mA, VDD = 4.5V, -40C to +125C Output High Voltage D090 VOH I/O ports/CLKOUT(3) D090A D092 OSC2 D092A VDD - 0.7 -- -- V IOH = -3.0 mA, VDD = 4.5V, -40C to +85C VDD - 0.7 -- -- V IOH = -2.5 mA, VDD = 4.5V, -40C to +125C VDD - 0.7 -- -- V IOH = -1.3 mA, VDD = 4.5V, -40C to +85C VDD - 0.7 -- -- V IOH = -1.0 mA, VDD = 4.5V, -40C to +125C In XT, HS and LP modes when external clock is used to drive OSC1. Capacitive Loading Specs on Output Pins D100 D101 Note COSC2 OSC2 pin -- -- 15 pF CIO -- -- 50 pF 1: 2: 3: 4: 5: All I/O pins Data in "Typ" column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. In EXTRC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the PIC12F510/16F506 be driven with external clock in RC mode. The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified levels represent normal operating conditions. Higher leakage current may be measured at different input voltages. Negative current is defined as coming out of the pin. This specification applies when GP3/MCLR is configured as an input with the pull-up disabled. The leakage current for the GP3/RB3/ MCLR pin is higher than for the standard I/O port pins. This specification applies when GP3/RB3/MCLR is configured as the MCLR Reset pin function with the weak pull-up always enabled. DS41268D-page 88 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 TABLE 13-1: Sym COMPARATOR SPECIFICATIONS Characteristics VOS Input Offset Voltage VCM Input Common Mode Voltage CMRR TRT VIVRF * Note 1: Common Mode Rejection Ratio Response Time(1) Internal Voltage Reference Sym * Note 1: Max Units -- 3 10 mV 0 -- VDD - 1.5 V +55* -- -- dB -- 150 400* ns 0.550 0.6 0.650 V Comments (VDD - 1.5V)/2 Internal COMPARATOR VOLTAGE REFERENCE (CVREF) SPECIFICATIONS Characteristics Min Typ Max Units Resolution -- -- VDD/24* VDD/32 -- -- LSb LSb Low Range (VRR = 1) High Range (VRR = 0) Absolute Accuracy -- -- -- -- 1/2* 1/2* LSb LSb Low Range (VRR = 1) High Range (VRR = 0) Unit Resistor Value (R) -- -- 2K* -- Settling Time(1) Comments -- -- 10* s These parameters are characterized but not tested. Settling time measured while VRR = 1 and VR<3:0> transitions from 0000 to 1111. TABLE 13-3: Param No. Typ These parameters are characterized but not tested. Response time measured with one comparator input at (VDD - 1.5)/2, while the other input transitions from VSS to VDD - 1.5V. TABLE 13-2: CVRES Min Sym A/D CONVERTER CHARACTERISTICS (PIC16F506/PIC12F510) Characteristic Min Typ Max Units 8 bits bit Conditions A01 NR Resolution -- -- A03 EIL Integral Error -- -- 1.5 LSb VDD = 5.0V A04 EDL Differential Error -- -- -1 < EDL 1.5 LSb No missing codes to 8 bits VDD = 5.0V A05 EFS Full-scale Range 2 -- 5.5* V A06 EOFF Offset Error -- -- 1.5 LSb A07 EGN Gain Error -0.5 -- +1.75 LSb A10 -- Monotonicity -- guaranteed(1) -- -- A25 VAIN Analog Input Voltage VSS -- VDD V A30 ZAIN Recommended Impedance of Analog Voltage Source -- -- 10 k VDD VDD = 5.0V VDD = 5.0V VSS VAIN VDD * These parameters are characterized but not tested. Data in the "Typ" column is at 5.0V, 25C unless otherwise stated. These parameters are for design guidance only are not tested. Note 1: The A/D conversion result never decreases with an increase in the input voltage and has no missing codes. (c) 2007 Microchip Technology Inc. DS41268D-page 89 PIC12F510/16F506 13.4 Timing Parameter Symbology and Load Conditions The timing parameter symbols have been created following one of the following formats: 1. TppS2ppS 2. TppS T F Frequency T Time Lowercase (pp) and their meanings: pp 2 To mc MCLR ck CLKOUT osc Oscillator cy Cycle Time os OSC1 drt Device Reset Timer t0 T0CKI io I/O port wdt Watchdog Timer Uppercase letters and their meanings: S F Fall P Period H High R Rise I Invalid (high-impedance) V Valid L Low Z High-impedance FIGURE 13-5: LOAD CONDITIONS Legend: CL = 50 pF for all pins except OSC2 Pin Cl 15 pF for OSC2 in XT, HS or LP modes when external clock is used to drive OSC1 VSS FIGURE 13-6: EXTERNAL CLOCK TIMING Q4 Q1 Q3 Q2 Q4 Q1 OSC1 1 3 3 4 4 2 DS41268D-page 90 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 TABLE 13-4: EXTERNAL CLOCK TIMING REQUIREMENTS Standard Operating Conditions (unless otherwise specified) Operating Temperature -40C TA +85C (industrial), -40C TA +125C (extended) AC CHARACTERISTICS Para No. 1A Sym FOSC Characteristic Min Typ(1) Max External CLKIN Frequency(2) DC -- 4 MHz XT Oscillator mode DC -- 20 MHz HS/EC Oscillator mode (PIC16F506 only) DC -- 200 kHz Oscillator Frequency 1 TOSC (2) External CLKIN Period(2) Oscillator Period (2) Units -- -- 4 MHz EXTRC Oscillator mode -- 4 MHz XT Oscillator mode 4 -- 20 MHz HS/EC Oscillator mode (PIC16F506 only) -- -- 200 kHz LP Oscillator mode 250 -- -- ns XT Oscillator mode 50 -- -- ns HS/EC Oscillator mode (PIC16F506 only) 5 -- -- s LP Oscillator mode 250 -- -- ns EXTRC Oscillator mode 250 -- 10,000 ns XT Oscillator mode 50 -- 250 ns HS/EC Oscillator mode (PIC16F506 only) LP Oscillator mode 5 -- -- s TCY Instruction Cycle Time 200 4/FOSC -- ns 3 TosL, TosH Clock in (OSC1) Low or High Time 50* -- -- ns TosR, TosF * Note 1: 2: Clock in (OSC1) Rise or Fall Time LP Oscillator mode 0.1 2 4 Conditions XT Oscillator 2* -- -- s LP Oscillator 10 -- -- ns HS/EC Oscillator (PIC16F506 only) -- -- 25* ns XT Oscillator -- -- 50* ns LP Oscillator -- -- 15 ns HS/EC Oscillator (PIC16F506 only) These parameters are characterized but not tested. Data in the Typical ("Typ") column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. All specified values are based on characterization data for that particular oscillator type under standard operating conditions with the device executing code. Exceeding these specified limits may result in an unstable oscillator operation and/or higher than expected current consumption. When an external clock input is used, the "max" cycle time limit is "DC" (no clock) for all devices. (c) 2007 Microchip Technology Inc. DS41268D-page 91 PIC12F510/16F506 TABLE 13-5: CALIBRATED INTERNAL RC FREQUENCIES AC CHARACTERISTICS Standard Operating Conditions (unless otherwise specified) Operating Temperature -40C TA +85C (industrial), -40C TA +125C (extended) Param Sym No. Freq. Min Tolerance F10 Characteristic FOSC Internal Calibrated INTOSC Frequency(1) * Note 1: Typ(1) Max* Units 1% 2% 7.92 7.84 8.00 8.00 8.08 8.16 5% 7.60 8.00 8.40 Conditions MHz VDD = 3.5V TA = 25C MHz 2.5V VDD 5.5V 0C TA +85C MHz 2.0V VDD 5.5V -40C TA +85C (Ind.) -40C TA +125C (Ext.) These parameters are characterized but not tested. Data in the Typical ("Typ") column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. FIGURE 13-7: I/O TIMING Q1 Q4 Q2 Q3 OSC1 I/O Pin (input) 17 I/O Pin (output) 19 18 New Value Old Value 20, 21 Note: All tests must be done with specified capacitive loads (see data sheet) 50 pF on I/O pins and CLKOUT. DS41268D-page 92 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 TABLE 13-6: TIMING REQUIREMENTS Standard Operating Conditions (unless otherwise specified) AC CHARACTERISTICS Operating Temperature -40C TA +85C (industrial) -40C TA +125C (extended) Param No. Sym Characteristic Min Typ(1) Max Units 17 TOSH2IOV OSC1 (Q1 cycle) to Port out valid(2), (3) -- -- 100* ns 18 TOSH2IOI OSC1 (Q2 cycle) to Port input invalid (I/O in hold time)(2) 50 -- -- ns 19 TIOV2OSH Port input valid to OSC1 (I/O in setup time) 20 -- -- ns (2), (3) 20 TIOR Port output rise time -- 10 25** ns 21 TIOF Port output fall time(2), (3) -- 10 25** ns * These parameters are characterized but not tested. ** These parameters are design targets and are not tested. Note 1: Data in the Typical ("Typ") column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. 2: Measurements are taken in EXTRC mode. 3: See Figure 13-5 for loading conditions. FIGURE 13-8: RESET, WATCHDOG TIMER AND DEVICE RESET TIMER TIMING VDD MCLR 30 Internal POR 32 32 32 DRT Timeout(2) Internal Reset Watchdog Timer Reset 31 34 34 I/O pin(1) Note 1: 2: I/O pins must be taken out of High-Impedance mode by enabling the output drivers in software. Runs in MCLR or WDT Reset only in XT, LP and HS modes. (c) 2007 Microchip Technology Inc. DS41268D-page 93 PIC12F510/16F506 TABLE 13-7: RESET, WATCHDOG TIMER AND DEVICE RESET TIMER Standard Operating Conditions (unless otherwise specified) Operating Temperature -40C TA +85C (industrial) -40C TA +125C (extended) AC CHARACTERISTICS Param Sym No. Characteristic 30 TMCL MCLR Pulse Width (low) 31 TWDT Watchdog Timer Time-out Period (No Prescaler) 32 TDRT Device Reset Timer Period Min Typ(1) Max Units 2000* -- -- ns VDD = 5.0V 9* 9* 18* 18* 30* 40* ms ms VDD = 5.0V (Industrial) VDD = 5.0V (Extended) 9* 9* 18* 18* 30* 40* ms ms VDD = 5.0V (Industrial) VDD = 5.0V (Extended) 0.5* 0.5* 1.125* 1.125* 2* 2.5* ms ms VDD = 5.0V (Industrial) VDD = 5.0V (Extended) -- -- 2000* ns Standard Short 34 TIOZ * Note 1: I/O high-impedance from MCLR low Conditions These parameters are characterized but not tested. Data in the Typical ("Typ") column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. FIGURE 13-9: TIMER0 CLOCK TIMINGS T0CKI 40 41 42 TABLE 13-8: TIMER0 CLOCK REQUIREMENTS Standard Operating Conditions (unless otherwise specified) Operating Temperature -40C TA +85C (industrial) -40C TA +125C (extended) AC CHARACTERISTICS Parm No. 40 Sym Tt0H Characteristic T0CKI High Pulse Width No Prescaler With Prescaler 41 Tt0L T0CKI Low Pulse Width No Prescaler 42 Tt0P T0CKI Period With Prescaler * Note 1: Min Typ(1) Max Units 0.5 TCY + 20* -- -- 10* -- -- ns 0.5 TCY + 20* -- -- ns Conditions ns 10* -- -- ns 20 or TCY + 40* N -- -- ns Whichever is greater. N = Prescale Value (1, 2, 4,..., 256) These parameters are characterized but not tested. Data in the Typical ("Typ") column is at 5V, 25C unless otherwise stated. These parameters are for design guidance only and are not tested. DS41268D-page 94 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 TABLE 13-9: VDD (Volts) PULL-UP RESISTOR RANGES Temperature (C) RB0 (GP0)/RB1 (GP1) 2.0 5.5 RB3 (GP3) 2.0 5.5 Min Typ Max Units -40 25 85 125 -40 25 85 125 73K 73K 82K 86K 15K 15K 19K 23K 105K 113K 123K 132k 21K 22K 26k 29K 186K 187K 190K 190K 33K 34K 35K 35K -40 25 85 125 -40 25 85 125 63K 77K 82K 86K 16K 16K 24K 26K 81K 93K 96k 100K 20k 21K 25k 27K 96K 116K 116K 119K 22K 23K 28K 29K (c) 2007 Microchip Technology Inc. DS41268D-page 95 PIC12F510/16F506 NOTES: DS41268D-page 96 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 14.0 DC AND CHARACTERISTICS GRAPHS AND CHARTS. Note: The graphs and tables provided following this note are a statistical summary based on a limited number of samples and are provided for informational purposes only. The performance characteristics listed herein are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified operating range (e.g., outside specified power supply range) and therefore, outside the warranted range. "Typical" represents the mean of the distribution at 25C. "Maximum" or "minimum" represents (mean + 3) or (mean 3) respectively, where s is a standard deviation, over each temperature range. FIGURE 14-1: IDD vs. VDD OVER FOSC XT Mode 1,400 1,200 Typical: Statistical Mean @25C Maximum: Mean (Worst-Case Temp) + 3 (-40C to 125C) Maximum 1,000 IDD (A) 4 MHz 800 Typical 600 4 MHz 400 200 0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (V) (c) 2007 Microchip Technology Inc. DS41268D-page 97 PIC12F510/16F506 FIGURE 14-2: TYPICAL IPD vs. VDD (SLEEP MODE, ALL PERIPHERALS DISABLED) Typical (Sleep Mode all Peripherals Disabled) 0.45 0.40 Typical: Statistical Mean @25C Maximum: Mean (Worst-Case Temp) + 3 (-40C to 125C) 0.35 IPD (A) 0.30 0.25 0.20 0.15 0.10 0.05 0.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (V) FIGURE 14-3: MAXIMUM IPD vs. VDD (SLEEP MODE, ALL PERIPHERALS DISABLED) Maximum (Sleep Mode all Peripherals Disabled) 18.0 16.0 Typical: Statistical Mean @25C Maximum: Mean (Worst-Case Temp) + 3 (-40C to 125C) 14.0 Max. 125C IPD (A) 12.0 10.0 8.0 6.0 4.0 Max. 85C 2.0 0.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (V) DS41268D-page 98 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 FIGURE 14-4: 80 COMPARATOR IPD vs. VDD (COMPARATOR ENABLED) Typical: Statistical Mean @25C Maximum: Mean (Worst-Case Temp) + 3 (-40C to 125C) Maximum IPD (A) 60 Typical 40 20 0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 4.0 4.5 5.0 5.5 VDD (V) TYPICAL WDT IPD vs. VDD FIGURE 14-5: 9 8 7 Typical: Statistical Mean @25C Maximum: Mean (Worst-Case Temp) + 3 (-40C to 125C) IPD (A) 6 5 4 3 2 1 0 2.0 2.5 3.0 3.5 VDD (V) (c) 2007 Microchip Technology Inc. DS41268D-page 99 PIC12F510/16F506 FIGURE 14-6: MAXIMUM WDT IPD vs. VDD OVER TEMPERATURE Maximum 25.0 20.0 Typical: Statistical Mean @25C Maximum: Mean (Worst-Case Temp) + 3 (-40C to 125C) IPD (A) Max. 125C 15.0 10.0 Max. 85C 5.0 0.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (V) FIGURE 14-7: WDT TIME-OUT vs. VDD OVER TEMPERATURE (NO PRESCALER) 50 Typical: Statistical Mean @25C Maximum: Mean (Worst-Case Temp) + 3 (-40C to 125C) Max. 125C 45 40 Max. 85C 35 Time (ms) 30 Typical. 25C 25 20 Min. -40C 15 10 5 0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (V) DS41268D-page 100 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 FIGURE 14-8: VOL vs. IOL OVER TEMPERATURE (VDD = 3.0V) (VDD = 3V, -40xC TO 125xC) 0.8 Typical: Statistical Mean @25C Maximum: Mean (Worst-Case Temp) + 3 (-40C to 125C) 0.7 Max. 125C 0.6 VOL (V) 0.5 Max. 85C 0.4 Typical 25C 0.3 0.2 Min. -40C 0.1 0.0 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 IOL (mA) FIGURE 14-9: VOL vs. IOL OVER TEMPERATURE (VDD = 5.0V) 0.45 Typical: Statistical Mean @25C Typical: Statistical Mean @25xC Maximum: Mean (Worst-Case Temp) + 3 Maximum: Meas(-40xC + 3 to 125xC) (-40C to 125C) 0.40 Max. 125C 0.35 Max. 85C VOL (V) 0.30 0.25 Typ. 25C 0.20 0.15 Min. -40C 0.10 0.05 0.00 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 IOL (mA) (c) 2007 Microchip Technology Inc. DS41268D-page 101 PIC12F510/16F506 FIGURE 14-10: VOH vs. IOH OVER TEMPERATURE (VDD = 3.0V) 3.5 3.0 Max. -40C Typ. 25C 2.5 Min. 125C VOH (V) 2.0 1.5 1.0 Typical: Statistical Mean @25C Maximum: Mean (Worst-Case Temp) + 3 (-40C to 125C) 0.5 0.0 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 -3.5 -4.0 IOH (mA) FIGURE 14-11: (VDD = 5.0V) VOH vs. IOH OVER TEMPERATURE ( , ) 5.5 5.0 Max. -40C Typ. 25C VOH (V) 4.5 Min. 125C 4.0 3.5 Typical: Statistical Mean @25C Maximum: Mean (Worst-Case Temp) + 3 (-40C to 125C) 3.0 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 -3.5 -4.0 -4.5 -5.0 IOH (mA) DS41268D-page 102 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 FIGURE 14-12: TTL INPUT THRESHOLD VIN vs. VDD (TTL Input, -40xC TO 125xC) 1.7 1.5 Typical: Statistical Mean @25C Maximum: Mean (Worst-Case Temp) + 3 (-40C to 125C) Max. -40C VIN (V) 1.3 Typ. 25C 1.1 Min. 125C 0.9 0.7 0.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (V) FIGURE 14-13: SCHMITT TRIGGER INPUT THRESHOLD VIN vs. VDD (ST Input, -40xC TO 125xC) 4.0 VIH Max. 125C 3.5 Typical: Statistical Mean @25C Maximum: Mean (Worst-Case Temp) + 3 (-40C to 125C) VIH Min. -40C VIN (V) 3.0 2.5 2.0 VIL Max. -40C 1.5 VIL Min. 125C 1.0 0.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (V) (c) 2007 Microchip Technology Inc. DS41268D-page 103 PIC12F510/16F506 FIGURE 14-14: DEVICE RESET TIMER (HS, XT AND LP) vs. VDD Maximum (Sleep Mode all Peripherals Disabled) 45 40 35 Max. 125C DRT (ms) 30 25 Max. 85C 20 Typical 25C 15 Min. -40C 10 5 0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 VDD (V) Note: See Table 13-7 if another clock mode is selected. DS41268D-page 104 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 15.0 PACKAGING 15.1 Package Marking Information 8-Lead PDIP Example 12F510/P 017 0410 XXXXXXXX XXXXXNNN YYWW 14-Lead PDIP Example XXXXXXXXXXXXXX XXXXXXXXXXXXXX YYWWNNN PIC16F506-I/P 0410017 8-Lead SOIC (3.90 mm) Example XXXXXXXX XXXXYYWW NNN PIC12F510-I /SN0410 017 8-Lead 2x3 DFN* Example XXX YWW NN BE0 610 17 TABLE 15-1: 8-LEAD 2X3 DFN (MC) TOP MARKING Part Number Marking PIC12F510(T)-I/MC BS0 PIC12F510-E/MC BT0 Legend: XX...X Y YY WW NNN e3 * Note: Customer-specific information Year code (last digit of calendar year) Year code (last 2 digits of calendar year) Week code (week of January 1 is week `01') Alphanumeric traceability code Pb-free JEDEC designator for Matte Tin (Sn) This package is Pb-free. The Pb-free JEDEC designator ( e3 ) can be found on the outer packaging for this package. In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-specific information. * Standard PIC(R) device marking consists of Microchip part number, year code, week code and traceability code. For PIC device marking beyond this, certain price adders apply. Please check with your Microchip Sales Office. For QTP devices, any special marking adders are included in QTP price. (c) 2007 Microchip Technology Inc. DS41268D-page 105 PIC12F510/16F506 15.2 Package Marking Information (Cont'd) 14-Lead SOIC (3.90 mm) XXXXXXXXXXX XXXXXXXXXXX YYWWNNN 8-Lead MSOP XXXXXX YWWNNN 14-Lead TSSOP (4.4 mm) XXXXXXXX YYWW NNN DS41268D-page 106 Example PIC16F506 -I/SL 0410017 Example 602/MS 310017 Example 16F506/ST 0410 017 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 /HDG3ODVWLF'XDO,Q/LQH 3 PLO%RG\>3',3@ 1RWH )RUWKHPRVWFXUUHQWSDFNDJHGUDZLQJVSOHDVHVHHWKH0LFURFKLS3DFNDJLQJ6SHFLILFDWLRQORFDWHGDW KWWSZZZPLFURFKLSFRPSDFNDJLQJ N NOTE 1 E1 1 3 2 D E A2 A L A1 c e eB b1 b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c) 2007 Microchip Technology Inc. DS41268D-page 107 PIC12F510/16F506 /HDG3ODVWLF'XDO,Q/LQH 3 PLO%RG\>3',3@ 1RWH )RUWKHPRVWFXUUHQWSDFNDJHGUDZLQJVSOHDVHVHHWKH0LFURFKLS3DFNDJLQJ6SHFLILFDWLRQORFDWHGDW KWWSZZZPLFURFKLSFRPSDFNDJLQJ N NOTE 1 E1 1 3 2 D E A2 A L A1 c b1 b e e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page 108 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 /HDG3ODVWLF6PDOO2XWOLQH 61 1DUURZPP%RG\>62,&@ 1RWH )RUWKHPRVWFXUUHQWSDFNDJHGUDZLQJVSOHDVHVHHWKH0LFURFKLS3DFNDJLQJ6SHFLILFDWLRQORFDWHGDW KWWSZZZPLFURFKLSFRPSDFNDJLQJ D e N E E1 NOTE 1 1 2 3 h b h A2 A c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c) 2007 Microchip Technology Inc. DS41268D-page 109 PIC12F510/16F506 /HDG3ODVWLF6PDOO2XWOLQH 61 1DUURZPP%RG\>62,&@ 1RWH )RUWKHPRVWFXUUHQWSDFNDJHGUDZLQJVSOHDVHVHHWKH0LFURFKLS3DFNDJLQJ6SHFLILFDWLRQORFDWHGDW KWWSZZZPLFURFKLSFRPSDFNDJLQJ DS41268D-page 110 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 /HDG3ODVWLF'XDO)ODW1R/HDG3DFNDJH 0& [[PP%RG\>')1@ 1RWH )RUWKHPRVWFXUUHQWSDFNDJHGUDZLQJVSOHDVHVHHWKH0LFURFKLS3DFNDJLQJ6SHFLILFDWLRQORFDWHGDW KWWSZZZPLFURFKLSFRPSDFNDJLQJ D e b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c) 2007 Microchip Technology Inc. DS41268D-page 111 PIC12F510/16F506 /HDG3ODVWLF6PDOO2XWOLQH 6/ 1DUURZPP%RG\>62,&@ 1RWH )RUWKHPRVWFXUUHQWSDFNDJHGUDZLQJVSOHDVHVHHWKH0LFURFKLS3DFNDJLQJ6SHFLILFDWLRQORFDWHGDW KWWSZZZPLFURFKLSFRPSDFNDJLQJ D N E E1 NOTE 1 1 2 3 e h b A A2 c L A1 L1 8QLWV 'LPHQVLRQ/LPLWV 1XPEHURI3LQV h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page 112 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 /HDG3ODVWLF0LFUR6PDOO2XWOLQH3DFNDJH 06 >0623@ 1RWH )RUWKHPRVWFXUUHQWSDFNDJHGUDZLQJVSOHDVHVHHWKH0LFURFKLS3DFNDJLQJ6SHFLILFDWLRQORFDWHGDW KWWSZZZPLFURFKLSFRPSDFNDJLQJ D N E E1 NOTE 1 1 2 e b A2 A c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c) 2007 Microchip Technology Inc. DS41268D-page 113 PIC12F510/16F506 /HDG3ODVWLF7KLQ6KULQN6PDOO2XWOLQH 67 PP%RG\>76623@ 1RWH )RUWKHPRVWFXUUHQWSDFNDJHGUDZLQJVSOHDVHVHHWKH0LFURFKLS3DFNDJLQJ6SHFLILFDWLRQORFDWHGDW KWWSZZZPLFURFKLSFRPSDFNDJLQJ D N E E1 NOTE 1 1 2 e b A2 A c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page 114 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 APPENDIX A: REVISION HISTORY Revision A Original release. Revision B Page 3 - Special Microcontroller Features and LowPower Features sections. PIC12F510 Pin Diagram. Section 3.0 - Figure 3-1, Figure 3-2, Table 3-2, Table 3-3. Section 4.0 - First paragraph, Section 4.2 - Figure references, Tables 4-1 and 4-2 (Note 1). Section 5.0 - Table 5-2, Table 5-6 Title. Section 6.0 Section 7.0 - First paragraph, Section 7.7, Register 7-1, Register 7-2, Register 7-3, Figure 7-1, Figure 7-2, Sections 7.4 through 7.7, Table 7-1. Section 8.0 - Sections 8.0 through 8.2, Figure 8-1, Table 8-1. Section 9.0 - Table 9-2, Register 9-1, Register 9-2, Table 9-3. Section 10.0 - Registers 10-1 and 10-2 (Note 1), Table 10-2 (Note 2), Section 10.2.5, Section 10.3, Table 10-3, Table 10-4, Table 10-5, Section 10.4, Section 10.5, Section 10.6.1, Section 10.9, 10.9.1, 10.9.2, Section 10.11. Section 13.0 - 13.1 DC Characteristics, 13.2 DC Characteristics, Table 13-1, Table 13-3, Table 13-4. Revision C (03/2007) Revised Table 3-2 GP3 and Legend; Revised Table 33 RB3 and Legend; Updated Registers to new format; Revised Section 9.1; Revised Table 9-2; Revised 13.1 DC Characteristics D025; Revised Table 13-2 and Table 13-3 and Notes; Replaced Package Drawings (Rev. AN); Added DFN package; Replaced Development Support Section; Revised Product ID System. Revision D (11/2007) Revised Table 1-1; Table 4-1, Table 4-2; Figure 4-5; Register 7-1 (Note 1); Register 8-1; Figure 13-4; 13.1 13.3; Table 13-1, Table 13-3, Table 13-6, Table 13-7, Table 13-9; Figure 14-4, Figure 14-14; Section 14.0; Packaging; Product ID System. (c) 2007 Microchip Technology Inc. DS41268D-page 115 PIC12F510/16F506 NOTES: DS41268D-page 116 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 INDEX A M ALU ....................................................................................... 9 Assembler MPASM Assembler..................................................... 80 Block Diagram Comparator for the PIC12F510................................... 46 Comparator for the PIC16F506................................... 46 On-Chip Reset Circuit ................................................. 64 Timer0......................................................................... 39 TMR0/WDT Prescaler................................................. 42 Watchdog Timer.......................................................... 67 Brown-Out Protection Circuit .............................................. 68 Memory Organization ......................................................... 15 Data Memory .............................................................. 16 Program Memory (PIC12F510/16F506) ..................... 15 Microchip Internet Web Site.............................................. 108 MPLAB ASM30 Assembler, Linker, Librarian ..................... 80 MPLAB ICD 2 In-Circuit Debugger ..................................... 81 MPLAB ICE 2000 High-Performance Universal In-Circuit Emulator...................................................... 81 MPLAB ICE 4000 High-Performance Universal In-Circuit Emulator...................................................... 81 MPLAB Integrated Development Environment Software.... 79 MPLAB PM3 Device Programmer ...................................... 81 MPLINK Object Linker/MPLIB Object Librarian .................. 80 C O C Compilers MPLAB C18 ................................................................ 80 MPLAB C30 ................................................................ 80 Carry ..................................................................................... 9 Clocking Scheme ................................................................ 14 Code Protection ............................................................ 55, 69 Configuration Bits................................................................ 55 Configuration Word (PIC12F510) ....................................... 56 Configuration Word (PIC16F506) ....................................... 57 Customer Change Notification Service ............................. 108 Customer Notification Service........................................... 108 Customer Support ............................................................. 108 OPTION Register................................................................ 20 OSC Selection .................................................................... 55 OSCCAL Register............................................................... 22 Oscillator Configurations..................................................... 58 Oscillator Types HS............................................................................... 58 LP ............................................................................... 58 RC .............................................................................. 58 XT ............................................................................... 58 B D DC ....................................................................................... 88 DC Characteristics (Extended) ........................................... 87 DC Characteristics (Industrial) ............................................ 86 DC Characteristics (Industrial, Extended) ........................... 88 Development Support ......................................................... 79 Digit Carry ............................................................................. 9 E Errata .................................................................................... 3 F Family of Devices PIC12F510/16F506....................................................... 5 FSR ..................................................................................... 24 I I/O Interfacing ..................................................................... 27 I/O Ports .............................................................................. 27 I/O Programming Considerations........................................ 37 ID Locations .................................................................. 55, 69 INDF.................................................................................... 24 Indirect Data Addressing..................................................... 24 Instruction Cycle ................................................................. 14 Instruction Flow/Pipelining .................................................. 14 Instruction Set Summary..................................................... 72 Internet Address................................................................ 108 L Loading of PC ..................................................................... 23 (c) 2007 Microchip Technology Inc. P PIC12F510/16F506 Device Varieties ................................... 7 PICSTART Plus Development Programmer....................... 82 POR Device Reset Timer (DRT) ................................... 55, 66 PD............................................................................... 68 Power-on Reset (POR)............................................... 55 TO............................................................................... 68 PORTB ............................................................................... 27 Power-down Mode.............................................................. 69 Prescaler ............................................................................ 41 Program Counter ................................................................ 23 Q Q cycles .............................................................................. 14 R RC Oscillator....................................................................... 59 Reader Response............................................................. 109 Read-Modify-Write.............................................................. 37 Register File Map PIC12F510 ................................................................. 16 PIC16F506 ................................................................. 16 Registers Special Function ......................................................... 17 Reset .................................................................................. 55 Reset on Brown-Out ........................................................... 68 S Sleep ............................................................................ 55, 69 Software Simulator (MPLAB SIM) ...................................... 80 Special Features of the CPU .............................................. 55 Special Function Registers ................................................. 17 Stack................................................................................... 23 STATUS Register ..................................................... 9, 18, 51 DS41268D-page 117 PIC12F510/16F506 T Timer0 Timer0 ......................................................................... 39 Timer0 (TMR0) Module ............................................... 39 TMR0 with External Clock........................................... 41 Timing Diagrams and Specifications................................... 91 Timing Parameter Symbology and Load Conditions........... 91 TRIS Registers.................................................................... 27 W Wake-up from Sleep ........................................................... 69 Watchdog Timer (WDT) ................................................ 55, 66 Period.......................................................................... 66 Programming Considerations ..................................... 66 WWW Address.................................................................. 108 WWW, On-Line Support........................................................ 3 Z Zero bit .................................................................................. 9 DS41268D-page 118 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 THE MICROCHIP WEB SITE CUSTOMER SUPPORT Microchip provides online support via our WWW site at www.microchip.com. This web site is used as a means to make files and information easily available to customers. Accessible by using your favorite Internet browser, the web site contains the following information: Users of Microchip products can receive assistance through several channels: * Product Support - Data sheets and errata, application notes and sample programs, design resources, user's guides and hardware support documents, latest software releases and archived software * General Technical Support - Frequently Asked Questions (FAQ), technical support requests, online discussion groups, Microchip consultant program member listing * Business of Microchip - Product selector and ordering guides, latest Microchip press releases, listing of seminars and events, listings of Microchip sales offices, distributors and factory representatives * * * * * Distributor or Representative Local Sales Office Field Application Engineer (FAE) Technical Support Development Systems Information Line Customers should contact their distributor, representative or field application engineer (FAE) for support. Local sales offices are also available to help customers. A listing of sales offices and locations is included in the back of this document. Technical support is available through the web site at: http://support.microchip.com CUSTOMER CHANGE NOTIFICATION SERVICE Microchip's customer notification service helps keep customers current on Microchip products. Subscribers will receive e-mail notification whenever there are changes, updates, revisions or errata related to a specified product family or development tool of interest. To register, access the Microchip web site at www.microchip.com, click on Customer Change Notification and follow the registration instructions. (c) 2007 Microchip Technology Inc. DS41268D-page 119 PIC12F510/16F506 READER RESPONSE It is our intention to provide you with the best documentation possible to ensure successful use of your Microchip product. If you wish to provide your comments on organization, clarity, subject matter, and ways in which our documentation can better serve you, please FAX your comments to the Technical Publications Manager at (480) 792-4150. Please list the following information, and use this outline to provide us with your comments about this document. To: Technical Publications Manager RE: Reader Response Total Pages Sent ________ From: Name Company Address City / State / ZIP / Country Telephone: (_______) _________ - _________ FAX: (______) _________ - _________ Application (optional): Would you like a reply? Y Device: PIC12F510/16F506 N Literature Number: DS41268D Questions: 1. What are the best features of this document? 2. How does this document meet your hardware and software development needs? 3. Do you find the organization of this document easy to follow? If not, why? 4. What additions to the document do you think would enhance the structure and subject? 5. What deletions from the document could be made without affecting the overall usefulness? 6. Is there any incorrect or misleading information (what and where)? 7. How would you improve this document? DS41268D-page 120 (c) 2007 Microchip Technology Inc. PIC12F510/16F506 PRODUCT IDENTIFICATION SYSTEM To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office. PART NO. X /XX XXX Device Temperature Range Package Pattern Examples: a) b) Device: c) PIC16F506 PIC12F510 PIC16F506T(1) PIC12F510T(2) PIC16F506-E/P 301 = Extended Temp., PDIP package, QTP pattern #301 PIC16F506-I/SN = Industrial Temp., SOIC package PIC16F506T-E/P = Extended Temp., PDIP package, Tape and Reel VDD range 2.0V to 5.5V Temperature Range: I E = -40C to +85C = -40C to +125C Package: MC MS P SL SN ST = = = = = = Pattern: (Industrial) (Extended) 8L DFN 2x3 (DUAL Flatpack No-Leads)(3, 4) Micro-Small Outline Package (MSOP)(3, 4) Plastic (PDIP)(4) 14L Small Outline, 3.90 mm (SOIC)(4) 8L Small Outline, 3.90 mm Narrow (SOIC)(4) Thin Shrink Small Outline (TSSOP)(4) Note 1: 2: 3: 4: T = in tape and reel SOIC and TSSOP packages only T = in tape and reel SOIC and MSOP packages only. PIC12F510 only. Pb-free. QTP, SQTP Code or Special Requirements (blank otherwise) (c) 2007 Microchip Technology Inc. DS41268D-page 121 WORLDWIDE SALES AND SERVICE AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: http://support.microchip.com Web Address: www.microchip.com Asia Pacific Office Suites 3707-14, 37th Floor Tower 6, The Gateway Harbour City, Kowloon Hong Kong Tel: 852-2401-1200 Fax: 852-2401-3431 India - Bangalore Tel: 91-80-4182-8400 Fax: 91-80-4182-8422 India - New Delhi Tel: 91-11-4160-8631 Fax: 91-11-4160-8632 Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 India - Pune Tel: 91-20-2566-1512 Fax: 91-20-2566-1513 France - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Japan - Yokohama Tel: 81-45-471- 6166 Fax: 81-45-471-6122 Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Farmington Hills, MI Tel: 248-538-2250 Fax: 248-538-2260 Kokomo Kokomo, IN Tel: 765-864-8360 Fax: 765-864-8387 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 Santa Clara Santa Clara, CA Tel: 408-961-6444 Fax: 408-961-6445 Toronto Mississauga, Ontario, Canada Tel: 905-673-0699 Fax: 905-673-6509 Australia - Sydney Tel: 61-2-9868-6733 Fax: 61-2-9868-6755 China - Beijing Tel: 86-10-8528-2100 Fax: 86-10-8528-2104 China - Chengdu Tel: 86-28-8665-5511 Fax: 86-28-8665-7889 Korea - Daegu Tel: 82-53-744-4301 Fax: 82-53-744-4302 China - Fuzhou Tel: 86-591-8750-3506 Fax: 86-591-8750-3521 Korea - Seoul Tel: 82-2-554-7200 Fax: 82-2-558-5932 or 82-2-558-5934 China - Hong Kong SAR Tel: 852-2401-1200 Fax: 852-2401-3431 Malaysia - Kuala Lumpur Tel: 60-3-6201-9857 Fax: 60-3-6201-9859 China - Nanjing Tel: 86-25-8473-2460 Fax: 86-25-8473-2470 Malaysia - Penang Tel: 60-4-227-8870 Fax: 60-4-227-4068 China - Qingdao Tel: 86-532-8502-7355 Fax: 86-532-8502-7205 Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 China - Shanghai Tel: 86-21-5407-5533 Fax: 86-21-5407-5066 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 China - Shenyang Tel: 86-24-2334-2829 Fax: 86-24-2334-2393 Taiwan - Hsin Chu Tel: 886-3-572-9526 Fax: 886-3-572-6459 China - Shenzhen Tel: 86-755-8203-2660 Fax: 86-755-8203-1760 Taiwan - Kaohsiung Tel: 886-7-536-4818 Fax: 886-7-536-4803 China - Shunde Tel: 86-757-2839-5507 Fax: 86-757-2839-5571 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 China - Wuhan Tel: 86-27-5980-5300 Fax: 86-27-5980-5118 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 Netherlands - Drunen Tel: 31-416-690399 Fax: 31-416-690340 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 UK - Wokingham Tel: 44-118-921-5869 Fax: 44-118-921-5820 China - Xian Tel: 86-29-8833-7252 Fax: 86-29-8833-7256 10/05/07 DS41268D-page 122 (c) 2007 Microchip Technology Inc.