2N3931 MECHANICAL DATA Dimensions in mm (inches) 8.51 (0.34) 9.40 (0.37) PNP SILICON TRANSISTOR 7.75 (0.305) 8.51 (0.335) 6.10 (0.240) 6.60 (0.260) 12.70 (0.500) min. 0.89 max. (0.035) FEATURES 0.41 (0.016) 0.53 (0.021) dia. 5.08 (0.200) typ. 2.54 (0.100) 2 1 * PNP High Voltage Planar Transistor 3 * Hermetic TO39 Package 0.74 (0.029) 1.14 (0.045) 0.71 (0.028) 0.86 (0.034) 45 * Full Screening Options Available TO-39 METAL PACKAGE Underside View PIN 1 - Emitter PIN 2 - Base PIN 3 - Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25C unless otherwise stated) VCBO VCEO VEBO IC PD PD Tstg TJ RJA RJC Collector - Base Voltage (IE = 0) Collector - Emitter Voltage (IB = 0) Emitter - Base Voltage (IB = 0) Collector Current Total Device Dissipation TA = 25 C Total Device Dissipation TC = 25 C Storage Temperature Max Operating Junction Temperature Thermal Resistance Junction to Ambient Thermal Resistance Junction to Case -180V -180V -6V -100mA 0.7W 2.5W -55 to 200C 200C 250C/W 70C/W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5989 Issue 1 2N3931 ELECTRICAL CHARACTERISTICS (Tcase = 25C unless otherwise stated) Parameter ICES Collector Cut Off Current ICEV Collector Cut Off Current ICEO Collector Cut Off Current IEBO Emitter Cut Off Current VCEO(SUS)* Collector Emitter Saturation Voltage VCE(sat)* Collector Emitter Saturation Voltage VBE(sat)* Base Emitter Saturation Voltage VBE* Base Emitter Voltage hFE* Test Conditions Collector Base Capacitance hFE Small Signal Current Gain Typ. Max. Unit VCE = 60V VBE = 0 1 A VCE = 100V VBE = 0 1 mA VCE = 60V Tcase = 150C 500 VBE = -2V A VCE = 40V IB = 0 50 VEB = 4V IC = 0 1 A VEB = 5.5V IC = 0 1 mA IC = 100mA IB = 0 IC = 2.5A IB = 250mA 0.75 IC = 5A IB = 500mA 1.5 IC = 2.5A IB = 250mA 1.45 IC = 5A IB = 500mA 2.2 IC = 2.5A VCE = 5V 1.45 IC = 50mA VCE = 5V 50 IC = 2.5A VCE = 5V 60 25 IC = 5A Tc = -55C VCE = 5V IE = 0 VCB = 10V DC Current Gain CCBO Min. 80 V 200 -- 30 250 pF f = 1MHz IC = 0.1A VCE = 5V 50 VCE = 5v 3.5 f = 1KHz IC = 0.5A -- f = 20MHz ton Turn On Time IC = 5A VCC = 30v IB1 = 0.5A toff Turn Off Time IC = 5A VCC = 30V IB1=-IB2 = 0.5A 0.5 s 1.3 * Pulse test tp = 300s , < 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5989 Issue 1