Dimensions in inches and (millimeters)
- 646 - Version: B07
MBS2 - MBS10
Single Phase 0.8 AMPS. Glass Passivated Bridge Rectifiers
MBS
.193(4.90)
.177(4.50)
.033(0.84)
.022(0.56)
.142(3.60)
.157(4.00) .272(6.9)
MAX
.087(2.20)
.102(2.60)
.106(2.70)
.090(2.30)
.053(1.53)
.037(0.95)
.014(0.35
.006(0.15
.008(0.20)
MAX
.114(2.9)
MAX
.028(0.70)
.043(1.10) .083(2.12)
.043(1.10)
Features
UL Recognized File # E-96005
Ideal for printed circuit board
Reliable low cost construction utilizing molded
plastic technique
High surge current capability
High temperature soldering guaranteed:
260 oC / 10 seconds at 5 lbs., (2.3 kg )
tension
Small size, simple installation
Leads solderable per MIL-STD-202
Method 208
Maximum Ratings and Electrical Characteristics
Rating at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number Symbol MBS2 MBS4 MBS6 MBS8 MBS10 Units
Maximum Recurrent Peak Reverse Voltage VRRM 200 400 600 800 1000 V
Maximum RMS Voltage VRMS 140 280 420 560 700 V
Maximum DC Blocking Voltage VDC 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
On glass-epoxy P.C.B.
On aluminum substrate
I(AV)
0.5
0.8
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load
(JEDEC method )
IFSM 35 A
Maximum Instantaneous Forward Voltage
@ 0.4A VF 1.0 V
Maximum DC Reverse Current @ TA=25 o
C
at Rated DC Blocking Voltage @ TA=125 oC IR 5.0
100
uA
uA
Typical Junction Capacitance Per Leg Cj 13 pF
Typical Thermal Resistance Per Leg RθJA 85 oC/W
Operating Temperature Range TJ -55 to +150 oC
Storage Temperature Range TSTG -55 to +150 oC
Note: 1. Measured at 1.0MHz and Applied Reverse Voltage of 4.0 Volts D.C.
RATINGS AND CHARACTERISTIC CURVES (MBS2 THRU )MBS10
FIG.1- DERATING CURVE FOR OUTPUT RECTIFIED
CURRENT
60 160
NUMBER OF CYCLES
FIG.3-MAXIMUM NON-REPETITIVE PEAK FORWARD
SURGE CURRENT PER LEG
FIG.5- TYPICAL FORWARD VOLTAGE
CHARACTERISTICS PER LEG
INSTANTANEOUS FORWARD CURRENT. (A)
FIG.2- TYPICAL REVERSE LEAKAGE
CHARACTERISTICS PER LEG
INSTANTANEOUS REVERSE CURRENT.( A)mLEAKAGE
140100
80
20
0
5
0.2
110010
1
10
0.1
0.01
10
1
0.2 0.4 0.6 0.8 1.0 1.2 1.4
0204060 80 100
INSTANTANEOUS FORWARD VOLTAGE. (V)
PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
Tj=25 C
0
Tj=125 C
0
Tj=40 C
Single Half Sine-Wave
(JEDEC Method)
O
F=60 Hz
F=50 Hz
1 Cycle
AMBIENT TEMPERATURE. ( C)
O
PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT.(A)RECTIFIED
10
15
20
25
30
35
100
0.1
0.01
0.1
0
0.3
0.4
0.5
0.6
0.7
0.8
040 120
Glass
Epoxy
P.C.B
Resistive or Inductive Load
FIG.4- TYPICAL JUNCTION CAPACTITANCE
PER LEG
REVERSE VOLTAGE. (V)
0.1 1 10 100 200
0
5
10
15
20
25
30
JUNCTION CAPACITANCE ( )pF
Tj=25 C
0
Tj=25 C
Pulse Width=300 s
1% Duty Cycle
m
Tj=25 C
f=1MHz
Vsig = 50mVp-p
Aluminum Substrate
Version: B07
