COTS - Extended Temperature Crystal Oscillators - 5.0V Thru-Hole Features RoHS Status Extremely wide operating temperature range - up to +200C 20KHz to 150MHz Frequency range Stability options of 75ppm to 500ppm Tristate and non-tristate options Applications Thru-hole PCB applications that require an HCMOS/TTL 5V clock and that might be exposed to extremely harsh environmental conditions. Down-hole applications Electrical Specifications Parameter Symbol Frequency Range F Frequency Stability F/F Operating Temperature T Min Includes calibration at 25C, operating temperature, change of input voltage, change of load, shock and vibration Output Typ Unit 0.02 150 MHz 75 500 ppm See Chart -55 +200 C See Chart Vcc 4.5 from positive edge to positive edge 5.0 Note ppm ppm/yr 3 1 Supply Current Jitter Max First Year After First Year Aging Supply Voltage Condition 5.5 V 40 mA 50 ps RMS All units, full temperature range Loads 3 TLL loads, or 10 LSTTL loads, or 15pF CMOS TTL and LSTTL @ 1.4V CMOS, @ 50% VDD TTL and LSTTL from 0.4 to 2.4V Rise and Fall CMOS, 15 pf, from 0.4 to (VDD -0.4) V Times CMOS, 30 pf, from 0.4 to (VDD -0.4) V *Superior symmetry available on all models. Symmetry* 40/60 40/60 10 10 20 % ns 75 South Street, Hopkinton, MA 01748 * 800-982-5737 * 508-435-6831 * FAX 508-435-5289 www.valpeyfisher.com RevE0610 1 COTS - Extended Temperature Crystal Oscillators - 5.0V Thru-Hole Model Selection Table NONTRISTATE TRISTATE Model Model 1254 1256 1258 4001 4002 4003 4004 4005 4006 4007 4008 4009 3254 3256 3258 4301 4302 4303 4304 4305 4306 4307 4308 4309 Frequency Stability 180 ppm 75 ppm 100 ppm 500 ppm 500 ppm 250 ppm 250 ppm 250 ppm 250 ppm 200 ppm 200 ppm 100 ppm Operating Temperature 0 to +175C 55 to +85C 40 to +85C 55 to +200C 0 to 200C 55 to +200C 0 to +200C 55 to +175C 0 to +175C 55 to +175C 0 to +175C 55 to +125C *Consult factory for better stability Environmental and Mechanical Conditions Parameter Shock Specification 1000 Gs, 0.35 ms, 1/2 sine wave, 3 shocks in each plane Vibration 10-2000 Hz of .06" d.a. or 20 Gs, whichever is less Humidity Leak Pins Resistant to 85 R.H. at 85C MIL STD 883, Method 1014, condition A1 Alloy 52, nickel plated with 60/40 solder coat, or 7 microinch gold over nickel Bend Test Will withstand two bends of 90 from reference Header Steel, with nickel plate, or 7 microinch gold over nickel Case Stainless steel, type 304 Marking Epoxy ink or laser engraved Resistance to Solvents MIL STD 202, Method 215 HOW TO ORDER M - "M" is full size DIL "H" is half size DIL 1 2 5 4 - FREQ. "1254" is model type 75 South Street, Hopkinton, MA 01748 * 800-982-5737 * 508-435-6831 * FAX 508-435-5289 www.valpeyfisher.com RevE0610 2 COTS - Extended Temperature Crystal Oscillators - 5.0V Thru-Hole Connections Pin Full Size Half Size 1 1 7 8 14 4 5 8 NonTristate Models Tristate Models Floating or 1 : Oscillator runs Ground or 0 : Disable or Tristate Ground and Case Output +5.0V, VDD NOT USED "M" Package "H" Package 75 South Street, Hopkinton, MA 01748 * 800-982-5737 * 508-435-6831 * FAX 508-435-5289 www.valpeyfisher.com RevE0610 3