CPD-101-75 IN-PHASE We Have A Part In Your Future TWO-WAY POWER re COMBINERIDIVIDER -1000 MHz RF PASSIVE COMPONENTS DESCRIPTION The CPD-101-75 is a wideband RF, subminature SPECIFICATIONS surface mount 2-way power divider/combiner suitable for pick and place assembly. PARAMETER MIN. | TYP. | MAX. | UNITS . . . . Impedance 75 Ohms This device offers low insertion loss and excellent phase and amplitude balance over a very broad Frequency Range 5 1000 MHz bandwidth and the low VSWR at ail ports minimize circuit interface problems. Temperature Range -40 +85 C The CPD-101-75 base, cover, and internal con-_ Insertion loss 0.6 1.5 dB struction consists of high temperature materials to Amplitude Balance +0.10 | +05 dB withstand even the most rigorous reflow profiles. Phase Balance +1 +3 Deg FUNCTIONAL SCHEMATIC - Isolation 16 27 dB IN o OUT Return Loss (All Ports) 15 21 dB PIN 1 3 e s L O OUT 4 PACKAGE OO ALL DIMENSIONS ARE IN INCHES [mn]. COVER MATERIAL: I 0.100 [2.54] TYP. Plastic 4 PLACES TI 0.038 [0.89] BASE MATERIAL: 0.317 [8.0s}-- SA5A 4 Alumina - 0.387 [9.83] 0.110 [2.79] LEADS: 0.050 [1.27] 60/40 Tin Lead plated phosphor bronze e 0.000 [0.00] a as 3 3 rors 100 [2.54] TYP. 2 2 fs T 8 A Pinout Chart | 9.100 [2.54] Pin Function 0.400 [10.16] r 0.210 fee MAX. . 0.208 [5.21] TyP Ground 0.195 [4.95] MIN. poo [0.25] i i 0.150 o (3.81) 1 SE 0.060 [1 p2e_| LI J+ 0.040 [1.02] Ground Ground TOLERANCES: XX = .01 Recommended Land XXX = +.005 Pattern Contact the factory for further information on tape and reel specifications and recommended reflow profiles. 1.13.00 Rev. A VARI-L Company Inc. 4895 Peoria Street Denver, Colorado 80239 Phone: (303) 371-1560 e Fax: (303) 371-0845 Email: sales@vari-l.com Website: www.vari-l.com