RF Series Aluminum Electrolytic Capacitors (High R.C. , High Reliability) MERITEK FEATURES High ripple current, low E.S.R. and long life. Suitable for electronic ballast, adaptor and switching power SPECIFICATIONS Item Characteristic Operating Temp Range - 40 ~ +105C - 25 ~ +105C Rated Working Voltage 160 ~ 400VDC 450VDC Capacitance Tolerance (120Hz 20C) 20%(M) I 0.06CV+10(uA) Leakage Current I : Leakage Current (A) C : Rated Capacitance(F) V : Working Voltage (V) (20C) After 2 minutes Surge Voltage W.V. 160 200 250 400 450 (20C) S.V. 200 250 300 450 500 Dissipation Factor ( tan ) (120Hz 20C) W.V. 160 200 250 400 450 tan 0.15 0.15 0.15 0.24 0.24 Low Temperature Stability Impedance ratio at 120Hz Rated Voltage (V) 160~250 400 450 -25C / +20C 3 6 6 -40C / +20C 4 6 - After hours (D 8mm 2000hrs, D 10mm 3000hrs) application of W.V. and +105C ripple current value , the capacitor shall meet the following limits. ( DC + ripple peak voltage rated working voltage ) Load Life Shelf Life Capacitance Change 20% of initial value. Dissipation Factor 200% of initial specified value Leakage Current initial specified value At +105C no voltage application after 1000 hours, the capacitor shall meet the limits for load life characteristics. ( with voltage treatment ) PART NUMBER SYSTEM DIMENSIONS (mm) RF 160V 101 M TA 16x25 Meritek Series Rated Voltage Rated Capacitance Express in micro farad(uF), First two digits are significant figures, Third digit denotes number of zeros. `R' denotes decimal point for values less than 10uF Tolerance M - 20% Package Code TA Tape & Ammo TR Tape & Reel Blank Case size - (D) Diameter x (L) Length in mm (Optional) D F d a 10 5.0 0.6 1.5 12.5 5.0 0.6 1.5 16 7.5 0.8 1.5 18 7.5 0.8 1.5 Rev. 7 Aluminum Electrolytic Capacitors RF Series (High R.C. , High Reliability) MERITEK RIPPLE CURRENT COEFFICIENTS Frequency(Hz) W.V. D=10mm 160~450 D>10mm 120 0.25 0.35 1k 10k Multiplier 0.61 0.88 0.66 0.89 100k Temperature(C) 65 75 85 95 105 Multiplier 1.8 1.65 1.50 1.25 1.00 1.0 1.0 CASE SIZE & MAX RIPPLE CURRENT V Cap. (uF) Item 4.7 10 22 33 47 68 100 220 V Cap. (uF) Item 2.2 3.3 4.7 10 22 33 47 68 100 120 150 180 Case size Max. impedance Max. ripple current DxL 160 IMP. R.C. DxL 200 IMP. R.C. 10x16 10x20 10x20 12.5x20 12.5x20 16x25 16x35.5 1.47 0.80 0.62 0.50 0.39 0.32 0.17 220 350 430 550 660 890 1540 10x16 10x20 12.5x20 12.5x25 12.5x25 16x31.5 18x35.5 1.47 0.80 0.62 0.50 0.39 0.32 0.17 220 350 460 610 730 980 1640 DxL 400 IMP. R.C. 10x20 10x25 12.5x25 16x25 16x31.5 16x31.5 16x31.5 18x31.5 18x35.5 18x40 18x40 2.60 2.20 1.72 0.94 0.73 0.59 0.46 0.38 0.32 0.26 0.23 170 220 340 510 690 820 990 1280 1480 1740 1910 DxL 10x16 10x20 12.5x20 12.5x25 16x31.5 16x31.5 18x31.5 450 IMP. 4.94 4.11 3.47 2.72 1.48 1.15 0.92 R.C. 110 150 190 300 500 620 780 DxL 10x16 10x20 12.5x20 12.5x25 16x25 16x31.5 18x35.5 18x40 : DxL : : mA(rms) 250 IMP. 3.45 2.70 1.47 1.15 0.92 0.71 0.59 0.31 (mm) 20C 100kHz 105C 100kHz R.C. 150 240 380 510 610 810 1110 1730 Rev. 7