Metal Oxide Varistor:TVR-D Series
Disc Type Varistor for Surge Protection (High Surge Series)
THINKING ELECTRONIC INDUSTRIAL Co., LTD. 72 www.thinking.com.tw 2013.03
All specifications are subject to change without notice.
Reliability
Item Standard Test conditions / Methods Specifications
Tensile
Strength
of
Terminations
IEC 60068-2-21
Gradually apply the specified force and keep the unit fixed for 10±1 sec.
Terminal diameter Force
(mm) (Kg)
0.5<d≦0.8 1.0
0.8<d≦1.25 2.0
△│V1mA/V1mA ≦│5%
No visible damage
Bending
Strength
of Terminals
IEC 60068-2-21
Hold specimen and apply the force specified below to each lead. Bend the
specimen to 90°, then return to the original position. Repeat the procedure in
the opposite direction.
Terminal diameter Force
(mm) (Kg)
0.5<d≦0.8 0.5
0.8<d≦1.25 1.0
△│V1mA/V1mA ≦│5%
No visible damage
Vibration IEC 61051-1
Frequency range: 10~55Hz
Amplitude: 0.75mm or 98m/s2
Direction: 3 mutually perpendicular directions, 2 hrs each.
△│V1mA/V1mA ≦│5%
No visible damage
Solderability IEC 60068-2-20 245±5℃ , 3±0.3 sec.
At least 95% of terminal
electrode is covered by new
solder
Resistance
to Soldering
Heat
IEC 60068-2-20 260±3℃ , 10±1 sec △│V1mA/V1mA ≦│5%
No visible damage
High
Temperature
Storage
IEC 60068-2-2 125±5℃ x 1000 hrs ± 24hrs △│V1mA/V1mA ≦│5%
No visible damage
Damp Heat,
Steady State IEC 60068-2-78 a. 40±2 , 90 ~ 95 %℃ RH, 1344 hrs
b. 40
±2℃, 90~ 95 % RH , at 10% Vdc, 1344 hrs
△│V1mA/V1mA ≦│5%
No visible damage
Insulation Resistance
≧100MΩ
Rapid
Change
of
Temperature
IEC 60068-2-14
The conditions shown below shall be repeated 5 cycles
Step Temperature (℃) Period (minutes)
1 -40±3 30±3
2 Room temperature 5±3
3 85±2 30±3
4 Room temperature 5±3
△│V1mA/V1mA ≦│5%
No visible damage
Endurance
at Upper
Category
Temperature
IEC 61051-1 85±2℃, 1000±24 hrs at VDC or Vrms (Max. Continuous Voltage) △│V1mA/V1mA ≦│10%
No visible damage
8/20μs
Surge Life IEC 61051-1 8/20μs waveform, 10 surge currents, unipolar, interval 30 sec, amplitude
corresponding to max. surge current derating curves for 20μs.
△│V1mA/V1mA ≦│10%
No visible damage
10/1000μs
Surge Life IEC 61051-1 10/1000μs waveform, 10 surge currents, unipolar, interval 2 mins,
amplitude corresponding to max. surge current derating curves for 1000μs.
△│V1mA/V1mA ≦│10%
No visible damage
Operating
Duty Cycle
Test
UL1449 3rd
6KV/3KA 1.2/50μs+8/20μs combination waveform with Vac(@ Deg 90)
for 15 times. Interval time between tests is 60 secs.
(For UL1449 3rd SPD Type 3 application test only)
∣△Vp /Vp∣≦10 %
No visible damage
Nominal
Discharge
Current Test
UL1449 3rd
3KA 8/20μs waveform with Vac (@ Deg 90) for 15 times.Interval time
between tests is 60 secs.
(For TVR20R UL1449 3rd SPD Type 2 application test only)
∣△Vp /Vp∣≦10 %
No visible damage
Voltage
Proof IEC 61051-1 Metal balls method, 2500 Vac 1 min No visible damage
Varistor
Voltage
Temp.
Coefficient
Specification
Standard
,
-0.05≦TC≦0.05 (%/℃)
)/%(%100
60
1
25@1
25@185@1 C
V
VV
mA
mAmA
℃
℃℃ )/%(%100
65
1
25@1
25@140@1 C
V
VV
mA
mAmA
℃
℃℃