E M C C o m p o n e n t s Chip beads For power line MPZ series (for automotive) RoHS REACH SVHC-Free Cl Br Pb Halogen Free Lead Free AEC-Q200 MPZ2012 type FEATURES Noise reduction solution for power line. Compared to the MMZ series, has low direct current resistance for compatibility with large currents, optimal for low power consumption. Performs well even in signal lines where low direct current resistance is required. Operating temperature range: -55 to +125C Compliant with AEC-Q200 APPLICATION Various ECUs, powertrains, body controls, and car multimedia (telematics). PART NUMBER CONSTRUCTION MPZ 2012 S 101 A T D25 Series name LxWxT dimensions 2.0x1.25x0.85 mm Material name Impedance () at 100MHz Characteristic type Packaging style Internal code CHARACTERISTICS SPECIFICATION TABLE Impedance DC resistance Rated current Part No. [100MHz] ( ) Tolerance ( )max. (A)max. 30 10 0.010 6 MPZ2012S300ATD25 100 25% 0.020 4 MPZ2012S101ATD25 220 25% 0.040 3 MPZ2012S221ATD25 330 25% 0.050 2.5 MPZ2012S331ATD25 600 25% 0.100 2 MPZ2012S601ATD25 1000 25% 0.150 1.5 MPZ2012S102ATD25 Please refer to the graph of rated current vs. temperature characteristics (derating) about the rating current at 85C or more in temperature of the product. Measurement equipment Measurement item Product No. Impedance E4991A+16192A DC resistance Type-7556 Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Yokogawa Rated current vs. temperature characteristics (derating) 7 Rated current (A) 6 S300A 5 4 3 2 S101A S221A S331A S601A S102A 1 0 -55 -35 -15 5 25 45 65 Temperature (C) 85 105 125 Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20190423 beads_automotive_power_mpz2012_en.fm E M C C o m p o n e n t s MPZ2012 type Z VS. FREQUENCY CHARACTERISTICS (BY SERIES) MPZ2012S series 1200 1100 MPZ2012S221A MPZ2012S102A 1000 Impedance () MPZ2012S101A 900 MPZ2012S300A MPZ2012S601A 800 MPZ2012S331A 700 600 500 400 300 200 100 0 1 10 100 1000 Frequency (MHz) 10000 Z, X, R VS. FREQUENCY CHARACTERISTICS MPZ2012S101ATD25 Z 30 R 20 10 0 X 1 10 100 1000 Frequency (MHz) 10000 400 350 300 250 200 150 100 50 0 Z R X 1 10 300 Z R X 1 10 100 1000 Frequency (MHz) 100 1000 Frequency (MHz) 10000 700 600 500 400 300 200 100 0 250 200 Z 150 R 100 50 0 10000 MPZ2012S601ATD25 Impedance () Impedance () MPZ2012S331ATD25 140 120 100 80 60 40 20 0 X 1 10 100 1000 Frequency (MHz) 10000 MPZ2012S102ATD25 1200 Impedance () Impedance () 40 Impedance () 50 MPZ2012S221ATD25 Impedance () MPZ2012S300ATD25 Z R X 1 10 100 1000 Frequency (MHz) 10000 1000 Z 800 R 600 400 200 0 X 1 10 100 1000 Frequency (MHz) Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 10000 (2/4) 20190423 beads_automotive_power_mpz2012_en.fm E M C C o m p o n e n t s MPZ2012 type PACKAGING STYLE SHAPE & DIMENSIONS REEL DIMENSIONS 2.00.2 0.850.2 o60min. 1.250.2 2.00.5 1.0 8.4 +2.0 -0.0 o130.2 0.50.3 o210.8 Dimensions in mm 14.4max. o1802.0 Dimensions in mm 2.00.05 4.00.1 3.50.05 1.5 +0.1 -0 B 8.00.3 1.2 Sprocket hole 1.750.1 TAPE DIMENSIONS RECOMMENDED LAND PATTERN 0.8 1 0.8 4.00.1 A K Dimensions in mm Cavity Dimensions in mm RECOMMENDED REFLOW PROFILE Preheating Soldering Natural cooling Type MPZ2012 A 1.50.2 160min. Taping B 2.30.2 K 1.1max. 200min. Peak 250 to 260C Temperature 230C 230C 300min. Drawing direction Dimensions in mm PACKAGE QUANTITY 180C 10s 150C 60 to 120s 30 to 60s Time Package quantity 4,000 pcs/reel TEMPERATURE RANGE, INDIVIDUAL WEIGHT Operating Storage temperature range temperature range -55 to +125C -55 to +125C The storage temperature range is for after the assembly. Individual weight 8 mg Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20190423 beads_automotive_power_mpz2012_en.fm E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is within 12 months. Be sure to follow the storage conditions (temperature: 5 to 40C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20190423 beads_automotive_power_mpz2012_en.fm