CO-600V Series Voltage Controlled Crystal Oscillators
Performance Characteristics
Parameter
Frequency:
Aging (typical @ 155.52 MHz):
Jitter:
Symmetry
Rise/Fall Time: (20-80%)
Supply/Output
(±5%)
Current:
(excluding output load current)
Deviation/Stability Codes
Control Voltage:
Phase Noise (Typical @ 155.52 MHz)
Characteristic
155.52 MHz Standard (Other Frequencies Available from
10 MHz to 160 MHz)
10 ppm for 10 years
<1 ps rms from 12 KHz to 20 MHz @ 155.52 MHz
40%/60% to 60%/40%
< 1.5 nanoseconds
Supply Voltage Output
+3.3Vdc or +5.0Vdc PECL
-4.5Vdc or -5.2Vdc ECL
< 60 mA for single ended output due to internal pull down resistors
< 50 mA for complementar y output units (requires external loading)
Temperature Temperature *Minimum
Code Range Stability Deviation
A 0/+50°C ± 20 ppm ± 50 ppm
D 0/+70°C ± 20 ppm ± 50 ppm
E 0/+70°C ± 40 ppm ± 100 ppm
G -20/+70°C ± 30 ppm ± 60 ppm
H -20/+70°C ± 40 ppm ± 100 ppm
J -40/+85°C ± 40 ppm ± 60 ppm
K -40/+85°C ± 50 ppm ± 100 ppm
S -40/+85°C ± 20 ppm ± 50 ppm
*Deviation is referenced to the specified output frequency. For example, in the ECL model
CO-645VS at 155.52 MHz, at 25°C and -0.5V control, the frequency is at least 50ppm
below 155.52 MHz and at -4.5V control, the frequency is at least 50ppm above 155.52
MHz (negative transfer function for ECL units).
Supply Control Voltage &
Voltage Output Transfer Function
+3.3 V PECL 0.3 to 3.0 V positive
+5.0 V PECL 0.5 to 4.5 V positive
-4.5 V ECL -0.5 to -4.5 V negative
-5.2 V ECL -0.5 to -4.5 V negative
Offset Phase Noise
10 Hz -50 dBc/Hz
100 Hz -80 dBc/Hz
1 kHz -115 dBc/Hz
10 kHz -135 dBc/Hz
50 kHz -140 dBc/Hz
Modulation Rate:
Size:
dc to 10 kHz standard
dc to 100 kHz, 3 db response, optional
0.8” x 0.5” x 0.425” (20.32 x 12.70 x 10.8 mm) max seated height for DIP
0.8” x 0.5” x 0.45” (20.32 x 12.70 x 11.43 mm) max seated height for Gull Wing
0.8” x 0.540” x 0.225”
(
20.32 x 13.72 x 5.72 mm)max seated height for Surface Mount
Linearity ±10% BSL
Vectron Inter national • 166 Glover Avenue, Norwalk, CT 06856 • Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON
2